menu "Console" # TODO: Rename to SERIAL_CONSOLE once Kconfig transition is complete. config CONSOLE_SERIAL8250 bool "Serial port console output" depends on HAVE_UART_IO_MAPPED default y help Send coreboot debug output to an I/O mapped serial port console. config CONSOLE_SERIAL8250MEM bool "Serial port console output (memory mapped)" depends on HAVE_UART_MEMORY_MAPPED help Send coreboot debug output to a memory mapped serial port console. choice prompt "Serial port" default CONSOLE_SERIAL_COM1 depends on CONSOLE_SERIAL8250 config CONSOLE_SERIAL_COM1 bool "COM1/ttyS0, I/O port 0x3f8" help Serial console on COM1/ttyS0 at I/O port 0x3f8. config CONSOLE_SERIAL_COM2 bool "COM2/ttyS1, I/O port 0x2f8" help Serial console on COM2/ttyS1 at I/O port 0x2f8. config CONSOLE_SERIAL_COM3 bool "COM3/ttyS2, I/O port 0x3e8" help Serial console on COM3/ttyS2 at I/O port 0x3e8. config CONSOLE_SERIAL_COM4 bool "COM4/ttyS3, I/O port 0x2e8" help Serial console on COM4/ttyS3 at I/O port 0x2e8. endchoice config TTYS0_BASE hex depends on CONSOLE_SERIAL8250 default 0x3f8 if CONSOLE_SERIAL_COM1 default 0x2f8 if CONSOLE_SERIAL_COM2 default 0x3e8 if CONSOLE_SERIAL_COM3 default 0x2e8 if CONSOLE_SERIAL_COM4 help Map the COM port names to the respective I/O port. choice prompt "Baud rate" default CONSOLE_SERIAL_115200 depends on CONSOLE_SERIAL8250 || CONSOLE_SERIAL8250MEM config CONSOLE_SERIAL_115200 bool "115200" help Set serial port Baud rate to 115200. config CONSOLE_SERIAL_57600 bool "57600" help Set serial port Baud rate to 57600. config CONSOLE_SERIAL_38400 bool "38400" help Set serial port Baud rate to 38400. config CONSOLE_SERIAL_19200 bool "19200" help Set serial port Baud rate to 19200. config CONSOLE_SERIAL_9600 bool "9600" help Set serial port Baud rate to 9600. endchoice config TTYS0_BAUD int default 115200 if CONSOLE_SERIAL_115200 default 57600 if CONSOLE_SERIAL_57600 default 38400 if CONSOLE_SERIAL_38400 default 19200 if CONSOLE_SERIAL_19200 default 9600 if CONSOLE_SERIAL_9600 help Map the Baud rates to an integer. # TODO: Allow user-friendly selection of settings other than 8n1. config TTYS0_LCS int default 3 depends on CONSOLE_SERIAL8250 || CONSOLE_SERIAL8250MEM # Use "select HAVE_USBDEBUG" on southbridges which have Debug Port code. config HAVE_USBDEBUG def_bool n config USBDEBUG def_bool n config USBDEBUG bool "USB 2.0 EHCI debug dongle support" default n depends on HAVE_USBDEBUG help This option allows you to use a so-called USB EHCI Debug device (such as the Ajays NET20DC, AMIDebug RX, or a system using the Linux "EHCI Debug Device gadget" driver found in recent kernel) to retrieve the coreboot debug messages (instead, or in addition to, a serial port). This feature is NOT supported on all chipsets in coreboot! It also requires a USB2 controller which supports the EHCI Debug Port capability. See http://www.coreboot.org/EHCI_Debug_Port for an up-to-date list of supported controllers. If unsure, say N. # Note: This option doesn't make sense on Intel ICH / AMD SB600 southbridges # as those hardcode the physical USB port to be used as Debug Port to 1. # It cannot be changed by coreboot. config USBDEBUG_DEFAULT_PORT int "Default USB port to use as Debug Port" default 1 depends on USBDEBUG && !SOUTHBRIDGE_INTEL_I82801GX && !SOUTHBRIDGE_AMD_SB600 help This option selects which physical USB port coreboot will try to use as EHCI Debug Port first (valid values are: 1-15). If coreboot doesn't detect an EHCI Debug Port dongle on this port, it will try all the other ports one after the other. This will take a few seconds of time though, and thus slow down the booting process. Hence, if you select the correct port here, you can speed up your boot time. Which USB port number (1-15) refers to which actual port on your mainboard (potentially also USB pin headers on your mainboard) is highly board-specific, and you'll likely have to find out by trial-and-error. # TODO: Deps? # TODO: Improve description. config ONBOARD_VGA_IS_PRIMARY bool "Use onboard VGA as primary video device" default n help If not selected, the last adapter found will be used. config CONSOLE_NE2K bool "Network console over NE2000 compatible Ethernet adapter" default n help Send coreboot debug output to a Ethernet console, it works same way as Linux netconsole, packets are received to UDP port 6666 on IP/MAC specified with options bellow. Use following netcat command: nc -u -l -p 6666 config CONSOLE_NE2K_DST_MAC depends on CONSOLE_NE2K string "Destination MAC address of remote system" default "00:13:d4:76:a2:ac" help Type in either MAC address of logging system or MAC address of the router. config CONSOLE_NE2K_DST_IP depends on CONSOLE_NE2K string "Destination IP of logging system" default "10.0.1.27" help This is IP adress of the system running for example netcat command to dump the packets. config CONSOLE_NE2K_SRC_IP depends on CONSOLE_NE2K string "IP address of coreboot system" default "10.0.1.253" help This is the IP of the coreboot system config CONSOLE_NE2K_IO_PORT depends on CONSOLE_NE2K hex "NE2000 adapter fixed IO port address" default 0xe00 help This is the IO port address for the IO port on the card, please select some non-conflicting region, 32 bytes of IO spaces will be used (and align on 32 bytes boundary, qemu needs broader align) choice prompt "Maximum console log level" default MAXIMUM_CONSOLE_LOGLEVEL_8 config MAXIMUM_CONSOLE_LOGLEVEL_8 bool "8: SPEW" help Way too many details. config MAXIMUM_CONSOLE_LOGLEVEL_7 bool "7: DEBUG" help Debug-level messages. config MAXIMUM_CONSOLE_LOGLEVEL_6 bool "6: INFO" help Informational messages. config MAXIMUM_CONSOLE_LOGLEVEL_5 bool "5: NOTICE" help Normal but significant conditions. config MAXIMUM_CONSOLE_LOGLEVEL_4 bool "4: WARNING" help Warning conditions. config MAXIMUM_CONSOLE_LOGLEVEL_3 bool "3: ERR" help Error conditions. config MAXIMUM_CONSOLE_LOGLEVEL_2 bool "2: CRIT" help Critical conditions. config MAXIMUM_CONSOLE_LOGLEVEL_1 bool "1: ALERT" help Action must be taken immediately. config MAXIMUM_CONSOLE_LOGLEVEL_0 bool "0: EMERG" help System is unusable. endchoice config MAXIMUM_CONSOLE_LOGLEVEL int default 0 if MAXIMUM_CONSOLE_LOGLEVEL_0 default 1 if MAXIMUM_CONSOLE_LOGLEVEL_1 default 2 if MAXIMUM_CONSOLE_LOGLEVEL_2 default 3 if MAXIMUM_CONSOLE_LOGLEVEL_3 default 4 if MAXIMUM_CONSOLE_LOGLEVEL_4 default 5 if MAXIMUM_CONSOLE_LOGLEVEL_5 default 6 if MAXIMUM_CONSOLE_LOGLEVEL_6 default 7 if MAXIMUM_CONSOLE_LOGLEVEL_7 default 8 if MAXIMUM_CONSOLE_LOGLEVEL_8 help Map the log level config names to an integer. choice prompt "Default console log level" default DEFAULT_CONSOLE_LOGLEVEL_8 config DEFAULT_CONSOLE_LOGLEVEL_8 bool "8: SPEW" depends on (MAXIMUM_CONSOLE_LOGLEVEL_8) help Way too many details. config DEFAULT_CONSOLE_LOGLEVEL_7 bool "7: DEBUG" depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7) help Debug-level messages. config DEFAULT_CONSOLE_LOGLEVEL_6 bool "6: INFO" depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7 ||\ MAXIMUM_CONSOLE_LOGLEVEL_6) help Informational messages. config DEFAULT_CONSOLE_LOGLEVEL_5 bool "5: NOTICE" depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7 ||\ MAXIMUM_CONSOLE_LOGLEVEL_6 || MAXIMUM_CONSOLE_LOGLEVEL_5) help Normal but significant conditions. config DEFAULT_CONSOLE_LOGLEVEL_4 bool "4: WARNING" depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7 ||\ MAXIMUM_CONSOLE_LOGLEVEL_6 || MAXIMUM_CONSOLE_LOGLEVEL_5 ||\ MAXIMUM_CONSOLE_LOGLEVEL_4) help Warning conditions. config DEFAULT_CONSOLE_LOGLEVEL_3 bool "3: ERR" depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7 ||\ MAXIMUM_CONSOLE_LOGLEVEL_6 || MAXIMUM_CONSOLE_LOGLEVEL_5 ||\ MAXIMUM_CONSOLE_LOGLEVEL_4 || MAXIMUM_CONSOLE_LOGLEVEL_3) help Error conditions. config DEFAULT_CONSOLE_LOGLEVEL_2 bool "2: CRIT" depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7 ||\ MAXIMUM_CONSOLE_LOGLEVEL_6 || MAXIMUM_CONSOLE_LOGLEVEL_5 ||\ MAXIMUM_CONSOLE_LOGLEVEL_4 || MAXIMUM_CONSOLE_LOGLEVEL_3 ||\ MAXIMUM_CONSOLE_LOGLEVEL_2) help Critical conditions. config DEFAULT_CONSOLE_LOGLEVEL_1 bool "1: ALERT" depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7 ||\ MAXIMUM_CONSOLE_LOGLEVEL_6 || MAXIMUM_CONSOLE_LOGLEVEL_5 ||\ MAXIMUM_CONSOLE_LOGLEVEL_4 || MAXIMUM_CONSOLE_LOGLEVEL_3 ||\ MAXIMUM_CONSOLE_LOGLEVEL_2 || MAXIMUM_CONSOLE_LOGLEVEL_1) help Action must be taken immediately. config DEFAULT_CONSOLE_LOGLEVEL_0 bool "0: EMERG" help System is unusable. endchoice config DEFAULT_CONSOLE_LOGLEVEL int default 0 if DEFAULT_CONSOLE_LOGLEVEL_0 default 1 if DEFAULT_CONSOLE_LOGLEVEL_1 default 2 if DEFAULT_CONSOLE_LOGLEVEL_2 default 3 if DEFAULT_CONSOLE_LOGLEVEL_3 default 4 if DEFAULT_CONSOLE_LOGLEVEL_4 default 5 if DEFAULT_CONSOLE_LOGLEVEL_5 default 6 if DEFAULT_CONSOLE_LOGLEVEL_6 default 7 if DEFAULT_CONSOLE_LOGLEVEL_7 default 8 if DEFAULT_CONSOLE_LOGLEVEL_8 help Map the log level config names to an integer. config CONSOLE_LOGBUF bool default n config NO_POST bool "Don't show any POST codes" default n config CONSOLE_POST bool "Show POST codes on the debug console" depends on !NO_POST default n help If enabled, coreboot will additionally print POST codes (which are usually displayed using a so-called "POST card" ISA/PCI/PCI-E device) on the debug console. endmenu