2 * This file is part of the superiotool project.
4 * Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
21 #include "superiotool.h"
23 #define DEVICE_ID_BYTE1_REG 0x20
24 #define DEVICE_ID_BYTE2_REG 0x21
26 #define DEVICE_REV_REG 0x1f
28 static const struct superio_registers reg_table[] = {
29 /* TODO: M5113 doesn't seem to have ID registers? */
30 {0x5315, "M1535/M1535D/M1535+/M1535D+", {
32 {0x1f,0x20,0x21,0x22,0x23,0x2c,0x2d,0x2e,EOT},
33 {NANA,0x53,0x15,0x00,0x00,RSVD,RSVD,RSVD,EOT}},
35 {0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,0xf2,0xf4,EOT},
36 {0x00,0x03,0xf0,0x06,0x02,0x08,0x00,0xff,0x00,EOT}},
37 {0x3, "Parallel port",
38 {0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,EOT},
39 {0x00,0x03,0x78,0x05,0x04,0x8c,0xc5,EOT}},
41 {0x30,0x60,0x61,0x70,0xf0,0xf1,0xf2,EOT},
42 {0x00,0x03,0xf8,0x04,0x00,0x00,0x0c,EOT}},
44 {0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,0xf2,EOT},
45 {0x00,0x03,0xe8,0x09,0x04,0x80,0x00,0x0c,EOT}},
47 {0x30,0x70,0x72,0xf0,EOT},
48 {NANA,0x01,0x00,0x00,EOT}},
50 {0x30,0x60,0x61,0x70,0xf0,0xf1,0xf2,EOT},
51 {0x00,0x02,0xf8,0x03,0x00,0x00,0x0c,EOT}},
53 {0x30,0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,EOT},
54 {0x00,0x35,0x14,0x11,0x71,RSVD,0x05,EOT}},
61 static void enter_conf_mode_ali(uint16_t port)
67 static void exit_conf_mode_ali(uint16_t port)
72 void probe_idregs_ali(uint16_t port)
77 probing_for("ALi", "", port);
79 enter_conf_mode_ali(port);
81 id = regval(port, DEVICE_ID_BYTE1_REG) << 8;
82 id |= regval(port, DEVICE_ID_BYTE2_REG);
84 /* TODO: Not documented/available on M512x (?) */
85 rev = regval(port, DEVICE_REV_REG);
87 if (superio_unknown(reg_table, id)) {
89 printf(NOTFOUND "id=0x%04x, rev=0x%02x\n", id, rev);
90 exit_conf_mode_ali(port);
94 printf("Found ALi %s (id=0x%04x, rev=0x%02x) at 0x%x\n",
95 get_superio_name(reg_table, id), id, rev, port);
98 dump_superio("ALi", reg_table, port, id, LDN_SEL);
100 exit_conf_mode_ali(port);
103 void print_ali_chips(void)
105 print_vendor_chips("ALi", reg_table);