2 * superio.c: RAM driver for SMSC LPC47M10X2 Super I/O chip
4 * Copyright 2000 AG Electronics Ltd.
5 * Copyright 2003-2004 Linux Networx
7 * Copyright (C) 2005 Digital Design Corporation
8 * Copyright (C) Ron Minnich, LANL
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
26 #include <device/device.h>
27 #include <device/pnp.h>
28 #include <console/console.h>
29 #include <device/smbus.h>
33 #include <pc80/keyboard.h>
36 #include "lpc47m10x.h"
38 /* Forward declarations */
39 static void enable_dev(device_t dev);
40 static void lpc47m10x_pnp_set_resources(device_t dev);
41 static void lpc47m10x_pnp_enable_resources(device_t dev);
42 static void lpc47m10x_pnp_enable(device_t dev);
43 static void lpc47m10x_init(device_t dev);
45 static void pnp_enter_conf_state(device_t dev);
46 static void pnp_exit_conf_state(device_t dev);
47 //static void dump_pnp_device(device_t dev);
49 struct chip_operations superio_smsc_lpc47m10x_ops = {
50 CHIP_NAME("SMSC LPC47M10x Super I/O")
51 .enable_dev = enable_dev
54 static struct device_operations ops = {
55 .read_resources = pnp_read_resources,
56 .set_resources = lpc47m10x_pnp_set_resources,
57 .enable_resources = lpc47m10x_pnp_enable_resources,
58 .enable = lpc47m10x_pnp_enable,
59 .init = lpc47m10x_init,
62 static struct pnp_info pnp_dev_info[] = {
63 { &ops, LPC47M10X2_FDC, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, { 0x07f8, 0}, },
64 { &ops, LPC47M10X2_PP, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, { 0x07f8, 0}, },
65 { &ops, LPC47M10X2_SP1, PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, },
66 { &ops, LPC47M10X2_SP2, PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, },
67 { &ops, LPC47M10X2_KBC, PNP_IO0 | PNP_IO1 | PNP_IRQ0 | PNP_IRQ1, { 0x7ff, 0 }, { 0x7ff, 0x4}, },
71 * Create device structures and allocate resources to devices specified in the
72 * pnp_dev_info array (above).
74 * @param dev Pointer to structure describing a Super I/O device.
76 static void enable_dev(device_t dev)
78 pnp_enable_devices(dev, &pnp_ops, ARRAY_SIZE(pnp_dev_info),
83 * Configure the specified Super I/O device with the resources (I/O space,
84 * etc.) that have been allocated for it.
86 * @param dev Pointer to structure describing a Super I/O device.
88 static void lpc47m10x_pnp_set_resources(device_t dev)
90 pnp_enter_conf_state(dev);
91 pnp_set_resources(dev);
92 pnp_exit_conf_state(dev);
95 static void lpc47m10x_pnp_enable_resources(device_t dev)
97 pnp_enter_conf_state(dev);
98 pnp_enable_resources(dev);
99 pnp_exit_conf_state(dev);
102 static void lpc47m10x_pnp_enable(device_t dev)
104 pnp_enter_conf_state(dev);
105 pnp_set_logical_device(dev);
108 pnp_set_enable(dev, 1);
111 pnp_set_enable(dev, 0);
113 pnp_exit_conf_state(dev);
117 * Initialize the specified Super I/O device.
119 * Devices other than COM ports and the keyboard controller are ignored.
120 * For COM ports, we configure the baud rate.
122 * @param dev Pointer to structure describing a Super I/O device.
124 static void lpc47m10x_init(device_t dev)
126 struct superio_smsc_lpc47m10x_config *conf = dev->chip_info;
127 struct resource *res0;
132 switch(dev->path.pnp.device) {
134 res0 = find_resource(dev, PNP_IDX_IO0);
135 init_uart8250(res0->base, &conf->com1);
139 res0 = find_resource(dev, PNP_IDX_IO0);
140 init_uart8250(res0->base, &conf->com2);
144 pc_keyboard_init(&conf->keyboard);
149 /** Enable access to the LPC47M10X2's configuration registers. */
150 static void pnp_enter_conf_state(device_t dev)
152 outb(0x55, dev->path.pnp.port);
155 /** Disable access to the LPC47M10X2's configuration registers. */
156 static void pnp_exit_conf_state(device_t dev)
158 outb(0xaa, dev->path.pnp.port);
163 * Print the values of all of the LPC47M10X2's configuration registers.
165 * NOTE: The LPC47M10X2 must be in config mode when this function is called.
167 * @param dev Pointer to structure describing a Super I/O device.
169 static void dump_pnp_device(device_t dev)
174 for(register_index = 0; register_index <= LPC47M10X2_MAX_CONFIG_REGISTER; register_index++) {
175 uint8_t register_value;
177 if ((register_index & 0x0f) == 0) {
178 print_debug_hex8(register_index);
179 print_debug_char(':');
182 /* Skip over 'register' that would cause exit from configuration mode */
183 if (register_index == 0xaa)
184 register_value = 0xaa;
186 register_value = pnp_read_config(dev, register_index);
188 print_debug_char(' ');
189 print_debug_hex8(register_value);
190 if ((register_index & 0x0f) == 0x0f) {