2 * This file is part of the coreboot project.
4 * Copyright (C) 2000 AG Electronics Ltd.
5 * Copyright (C) 2003-2004 Linux Networx
6 * Copyright (C) 2004 Tyan
7 * Copyright (C) 2005 Digital Design Corporation
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
24 /* RAM driver for SMSC LPC47B272 Super I/O chip. */
27 #include <device/device.h>
28 #include <device/pnp.h>
29 #include <console/console.h>
30 #include <device/smbus.h>
34 #include <pc80/keyboard.h>
36 #include "lpc47b272.h"
38 // Forward declarations
39 static void enable_dev(device_t dev);
40 void lpc47b272_pnp_set_resources(device_t dev);
41 void lpc47b272_pnp_set_resources(device_t dev);
42 void lpc47b272_pnp_enable_resources(device_t dev);
43 void lpc47b272_pnp_enable(device_t dev);
44 static void lpc47b272_init(device_t dev);
46 static void pnp_enter_conf_state(device_t dev);
47 static void pnp_exit_conf_state(device_t dev);
48 static void dump_pnp_device(device_t dev);
51 struct chip_operations superio_smsc_lpc47b272_ops = {
52 CHIP_NAME("SMSC LPC47B272 Super I/O")
53 .enable_dev = enable_dev
56 static struct device_operations ops = {
57 .read_resources = pnp_read_resources,
58 .set_resources = lpc47b272_pnp_set_resources,
59 .enable_resources = lpc47b272_pnp_enable_resources,
60 .enable = lpc47b272_pnp_enable,
61 .init = lpc47b272_init,
64 static struct pnp_info pnp_dev_info[] = {
65 { &ops, LPC47B272_FDC, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, { 0x07f8, 0}, },
66 { &ops, LPC47B272_PP, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, { 0x07f8, 0}, },
67 { &ops, LPC47B272_SP1, PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, },
68 { &ops, LPC47B272_SP2, PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, },
69 { &ops, LPC47B272_KBC, PNP_IO0 | PNP_IO1 | PNP_IRQ0 | PNP_IRQ1, { 0x7ff, 0 }, { 0x7ff, 0x4}, },
70 { &ops, LPC47B272_RT, PNP_IO0, { 0x780, 0 }, },
73 /**********************************************************************************/
74 /* PUBLIC INTERFACE */
75 /**********************************************************************************/
77 //----------------------------------------------------------------------------------
78 // Function: enable_dev
79 // Parameters: dev - pointer to structure describing a Super I/O device
81 // Description: Create device structures and allocate resources to devices
82 // specified in the pnp_dev_info array (above).
84 static void enable_dev(device_t dev)
86 pnp_enable_devices(dev, &pnp_ops,
87 sizeof(pnp_dev_info)/sizeof(pnp_dev_info[0]),
91 //----------------------------------------------------------------------------------
92 // Function: lpc47b272_pnp_set_resources
93 // Parameters: dev - pointer to structure describing a Super I/O device
95 // Description: Configure the specified Super I/O device with the resources
96 // (I/O space, etc.) that have been allocated for it.
98 void lpc47b272_pnp_set_resources(device_t dev)
100 pnp_enter_conf_state(dev);
101 pnp_set_resources(dev);
102 pnp_exit_conf_state(dev);
105 void lpc47b272_pnp_enable_resources(device_t dev)
107 pnp_enter_conf_state(dev);
108 pnp_enable_resources(dev);
109 pnp_exit_conf_state(dev);
112 void lpc47b272_pnp_enable(device_t dev)
114 pnp_enter_conf_state(dev);
115 pnp_set_logical_device(dev);
118 pnp_set_enable(dev, 1);
121 pnp_set_enable(dev, 0);
123 pnp_exit_conf_state(dev);
126 //----------------------------------------------------------------------------------
127 // Function: lpc47b272_init
128 // Parameters: dev - pointer to structure describing a Super I/O device
129 // Return Value: None
130 // Description: Initialize the specified Super I/O device.
131 // Devices other than COM ports and the keyboard controller are
132 // ignored. For COM ports, we configure the baud rate.
134 static void lpc47b272_init(device_t dev)
136 struct superio_smsc_lpc47b272_config *conf = dev->chip_info;
137 struct resource *res0, *res1;
142 switch(dev->path.u.pnp.device) {
144 res0 = find_resource(dev, PNP_IDX_IO0);
145 init_uart8250(res0->base, &conf->com1);
149 res0 = find_resource(dev, PNP_IDX_IO0);
150 init_uart8250(res0->base, &conf->com2);
154 res0 = find_resource(dev, PNP_IDX_IO0);
155 res1 = find_resource(dev, PNP_IDX_IO1);
156 init_pc_keyboard(res0->base, res1->base, &conf->keyboard);
161 /**********************************************************************************/
162 /* PRIVATE FUNCTIONS */
163 /**********************************************************************************/
165 //----------------------------------------------------------------------------------
166 // Function: pnp_enter_conf_state
167 // Parameters: dev - pointer to structure describing a Super I/O device
168 // Return Value: None
169 // Description: Enable access to the LPC47B272's configuration registers.
171 static void pnp_enter_conf_state(device_t dev)
173 outb(0x55, dev->path.u.pnp.port);
176 //----------------------------------------------------------------------------------
177 // Function: pnp_exit_conf_state
178 // Parameters: dev - pointer to structure describing a Super I/O device
179 // Return Value: None
180 // Description: Disable access to the LPC47B272's configuration registers.
182 static void pnp_exit_conf_state(device_t dev)
184 outb(0xaa, dev->path.u.pnp.port);
188 //----------------------------------------------------------------------------------
189 // Function: dump_pnp_device
190 // Parameters: dev - pointer to structure describing a Super I/O device
191 // Return Value: None
192 // Description: Print the values of all of the LPC47B272's configuration registers.
193 // NOTE: The LPC47B272 must be in configuration mode when this
194 // function is called.
196 static void dump_pnp_device(device_t dev)
201 for(register_index = 0; register_index <= LPC47B272_MAX_CONFIG_REGISTER; register_index++) {
202 uint8_t register_value;
204 if ((register_index & 0x0f) == 0) {
205 print_debug_hex8(register_index);
206 print_debug_char(':');
209 // Skip over 'register' that would cause exit from configuration mode
210 if (register_index == 0xaa)
211 register_value = 0xaa;
213 register_value = pnp_read_config(dev, register_index);
215 print_debug_char(' ');
216 print_debug_hex8(register_value);
217 if ((register_index & 0x0f) == 0x0f) {