2 * This file is part of the coreboot project.
4 * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; version 2 of the License.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
21 * Seems the link and width of HT link needs to be setup too, you need to
22 * generate PCI reset or LDTSTOP to apply.
27 #warning hack the right header here
29 /* The 256 bytes of NVRAM for S3 storage, 256B aligned */
30 #define K8T890_NVRAM_IO_BASE 0xf00
31 #define K8T890_MULTIPLE_FN_EN 0x4f
32 /* we provide S3 NVRAM to system */
33 #define S3_NVRAM_EARLY 1
36 /* AMD K8 LDT0, LDT1, LDT2 Link Control Registers */
37 static ldtreg[3] = {0x86, 0xa6, 0xc6};
39 /* This functions sets KT890 link frequency and width to same values as
40 * it has been setup on K8 side, by AMD NB init.
43 u8 k8t890_early_setup_ht(void)
45 u8 awidth, afreq, cldtfreq, reg;
46 u8 cldtwidth_in, cldtwidth_out, vldtwidth_in, vldtwidth_out, ldtnr, width;
49 /* hack, enable NVRAM in chipset */
50 pci_write_config8(PCI_DEV(0, 0x0, 0), K8T890_MULTIPLE_FN_EN, 0x01);
53 * NVRAM I/O base at K8T890_NVRAM_IO_BASE
56 pci_write_config8(PCI_DEV(0, 0x0, 2), 0xa2, (K8T890_NVRAM_IO_BASE >> 8));
57 reg = pci_read_config8(PCI_DEV(0, 0x0, 2), 0xa1);
59 pci_write_config8(PCI_DEV(0, 0x0, 2), 0xa1, reg);
61 /* check if connected non coherent, initcomplete (find the SB on K8 side) */
62 if (0x7 == pci_read_config8(PCI_DEV(0, 0x18, 0), 0x98)) {
64 } else if (0x7 == pci_read_config8(PCI_DEV(0, 0x18, 0), 0xb8)) {
66 } else if (0x7 == pci_read_config8(PCI_DEV(0, 0x18, 0), 0xd8)) {
70 print_debug("K8T890 found at LDT ");
71 print_debug_hex8(ldtnr);
73 /* get the maximum widths for both sides */
74 cldtwidth_in = pci_read_config8(PCI_DEV(0, 0x18, 0), ldtreg[ldtnr]) & 0x7;
75 cldtwidth_out = (pci_read_config8(PCI_DEV(0, 0x18, 0), ldtreg[ldtnr]) >> 4) & 0x7;
76 vldtwidth_in = pci_read_config8(PCI_DEV(0, 0x0, 0), 0x66) & 0x7;
77 vldtwidth_out = (pci_read_config8(PCI_DEV(0, 0x0, 0), 0x66) >> 4) & 0x7;
79 width = MIN(MIN(MIN(cldtwidth_out, cldtwidth_in), vldtwidth_out), vldtwidth_in);
80 print_debug(" Agreed on width: ");
81 print_debug_hex8(width);
83 awidth = pci_read_config8(PCI_DEV(0, 0x0, 0), 0x67);
85 /* Update the desired HT LNK to match AMD NB max from VIA NB is 0x1 */
86 width = (width == 0x01) ? 0x11 : 0x00;
88 pci_write_config8(PCI_DEV(0, 0x0, 0), 0x67, width);
90 /* Get programmed HT freq at base 0x89 */
91 cldtfreq = pci_read_config8(PCI_DEV(0, 0x18, 0), ldtreg[ldtnr] + 3) & 0xf;
92 print_debug(" CPU programmed to HT freq: ");
93 print_debug_hex8(cldtfreq);
95 print_debug(" VIA HT caps: ");
96 vldtcaps = pci_read_config16(PCI_DEV(0, 0, 0), 0x6e);
97 print_debug_hex16(vldtcaps);
99 if (!(vldtcaps & (1 << cldtfreq ))) {
100 die("Chipset does not support desired HT frequency\n");
103 afreq = pci_read_config8(PCI_DEV(0, 0x0, 0), 0x6d);
104 pci_write_config8(PCI_DEV(0, 0x0, 0), 0x6d, cldtfreq);
107 /* no reset needed */
108 if ((width == awidth) && (afreq == cldtfreq)) {
115 int s3_save_nvram_early(u32 dword, int size, int nvram_pos) {
117 printk_debug("Writing %x of size %d to nvram pos: %d\n", dword, size, nvram_pos);
120 outb((dword & 0xff), K8T890_NVRAM_IO_BASE+nvram_pos);
124 outw((dword & 0xffff), K8T890_NVRAM_IO_BASE+nvram_pos);
128 outl(dword, K8T890_NVRAM_IO_BASE+nvram_pos);
135 int s3_load_nvram_early(int size, u32 *old_dword, int nvram_pos) {
139 *old_dword |= inb(K8T890_NVRAM_IO_BASE+nvram_pos);
143 *old_dword &= ~0xffff;
144 *old_dword |= inw(K8T890_NVRAM_IO_BASE+nvram_pos);
148 *old_dword = inl(K8T890_NVRAM_IO_BASE+nvram_pos);
152 printk_debug("Loading %x of size %d to nvram pos:%d\n", * old_dword, size, nvram_pos-size);