2 * This file is part of the coreboot project.
4 * Copyright (C) 2008 coresystems GmbH
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License as
8 * published by the Free Software Foundation; version 2 of
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
23 #include "../../../../src/northbridge/intel/i945/ich7.h"
25 #undef DEBUG_SMM_RELOCATION
26 //#define DEBUG_SMM_RELOCATION
28 #define LAPIC_ID 0xfee00020
30 .global smm_relocation_start
31 .global smm_relocation_end
33 /* initially SMM is some sort of real mode. */
37 * This trampoline code relocates SMBASE to 0xa0000 - ( lapicid * 0x400 )
39 * Why 0x400? It is a safe value to cover the save state area per CPU. On
40 * current AMD CPUs this area is _documented_ to be 0x200 bytes. On Intel
41 * Core 2 CPUs the _documented_ parts of the save state area is 48 bytes
42 * bigger, effectively sizing our data structures 0x300 bytes.
44 * LAPICID SMBASE SMM Entry SAVE STATE
45 * 0 0xa0000 0xa8000 0xafd00
46 * 1 0x9fc00 0xa7c00 0xaf900
47 * 2 0x9f800 0xa7800 0xaf500
48 * 3 0x9f400 0xa7400 0xaf100
49 * 4 0x9f000 0xa7000 0xaed00
50 * 5 0x9ec00 0xa6c00 0xae900
51 * 6 0x9e800 0xa6800 0xae500
52 * 7 0x9e400 0xa6400 0xae100
53 * 8 0x9e000 0xa6000 0xadd00
54 * 9 0x9dc00 0xa5c00 0xad900
55 * 10 0x9d800 0xa5800 0xad500
56 * 11 0x9d400 0xa5400 0xad100
57 * 12 0x9d000 0xa5000 0xacd00
58 * 13 0x9cc00 0xa4c00 0xac900
59 * 14 0x9c800 0xa4800 0xac500
60 * 15 0x9c400 0xa4400 0xac100
64 * 31 0x98400 0xa0400 0xa8100
66 * With 32 cores, the SMM handler would need to fit between
67 * 0xa0000-0xa0400 and the stub plus stack would need to go
68 * at 0xa8000-0xa8100 (example for core 0). That is not enough.
70 * This means we're basically limited to 16 cpu cores before
71 * we need to use the TSEG/HSEG for the actual SMM handler plus stack.
72 * When we exceed 32 cores, we also need to put SMBASE to TSEG/HSEG.
74 * If we figure out the documented values above are safe to use,
75 * we could pack the structure above even more, so we could use the
76 * scheme to pack save state areas for 63 AMD CPUs or 58 Intel CPUs
79 * Note: Some versions of Pentium M need their SMBASE aligned to 32k.
80 * On those the above only works for up to 2 cores. But for now we only
81 * care fore Core (2) Duo/Solo
86 /* Check revision to see if AMD64 style SMM_BASE
87 * Intel Core Solo/Duo: 0x30007
88 * Intel Core2 Solo/Duo: 0x30100
90 * This check does not make much sense, unless someone ports
91 * SMI handling to AMD64 CPUs.
94 mov $0x38000 + 0x7efc, %ebx
95 addr32 mov (%ebx), %al
99 mov $0x38000 + 0x7ef8, %ebx
102 mov $0x38000 + 0x7f00, %ebx
105 /* Get this CPU's LAPIC ID */
107 addr32 movl (%esi), %ecx
110 /* calculate offset by multiplying the
111 * apic ID by 1024 (0x400)
117 subl %edx, %eax /* subtract offset, see above */
119 addr32 movl %eax, (%ebx)
122 /* The next section of code is hardware specific */
124 /* Clear SMI status */
125 movw $(DEFAULT_PMBASE + 0x34), %dx
129 /* Clear PM1 status */
130 movw $(DEFAULT_PMBASE + 0x00), %dx
134 /* Set EOS bit so other SMIs can occur */
135 movw $(DEFAULT_PMBASE + 0x30), %dx
140 /* End of hardware specific section. */
141 #ifdef DEBUG_SMM_RELOCATION
142 /* print [SMM-x] so we can determine if CPUx went to SMM */
143 movw $TTYS0_BASE, %dx
153 /* calculate ascii of cpu number. More than 9 cores? -> FIXME */
165 /* That's it. return */