implement io based udelay function for all mainboards that lack an apic
[coreboot.git] / src / pc80 / i8259.c
1 #include <arch/io.h>
2 /* code taken from: 
3 !
4 !       setup.S         Copyright (C) 1991, 1992 Linus Torvalds
5 !
6 ! setup.s is responsible for getting the system data from the BIOS,
7 ! and putting them into the appropriate places in system memory.
8 ! both setup.s and system has been loaded by the bootblock.
9  */
10 /* we're getting screwed again and again by this problem of the 8259. 
11  * so we're going to leave this lying around for inclusion into 
12  * crt0.S on an as-needed basis. 
13 ! well, that went ok, I hope. Now we have to reprogram the interrupts :-(
14 ! we put them right after the intel-reserved hardware interrupts, at
15 ! int 0x20-0x2F. There they won't mess up anything. Sadly IBM really
16 ! messed this up with the original PC, and they haven't been able to
17 ! rectify it afterwards. Thus the bios puts interrupts at 0x08-0x0f,
18 ! which is used for the internal hardware interrupts as well. We just
19 ! have to reprogram the 8259's, and it isn't fun.
20  */
21
22 void setup_i8259(void)
23 {
24         outb(0x11, 0x20);               /*! initialization sequence to 8259A-1*/
25         outb(0x11, 0xA0);               /*! and to 8259A-2*/
26         outb(0x20, 0x21);               /*! start of hardware int's (0x20)*/
27         outb(0x28, 0xA1);               /*! start of hardware int's 2 (0x28)*/
28         outb(0x04, 0x21);               /*! 8259-1 is master*/
29         outb(0x02, 0xA1);               /*! 8259-2 is slave*/
30         outb(0x01, 0x21);               /*! 8086 mode for both*/
31         outb(0x01, 0xA1);               
32         outb(0xFF, 0xA1);               /*! mask off all interrupts for now*/
33         outb(0xFB, 0x21);               /*! mask all irq's but irq2 which is cascaded*/
34 }
35
36 /*
37  * I like the way Linus says it: 
38 ! Well, that certainly wasn't fun :-(. Hopefully it works, and we don't
39 ! need no steenking BIOS anyway (except for the initial loading :-).
40 */
41