src/mainboard/tyan/s4882/romstage.c

   1 #define ASSEMBLY 1
   2 #define __PRE_RAM__
   3
   4 #include <stdint.h>
   5 #include <string.h>
   6 #include <device/pci_def.h>
   7 #include <arch/io.h>
   8 #include <device/pnp_def.h>
   9 #include <arch/romcc_io.h>
  10 #include <cpu/x86/lapic.h>
  11 #include "option_table.h"
  12 #include "pc80/mc146818rtc_early.c"
  13 #include "pc80/serial.c"
  14 #include "arch/i386/lib/console.c"
  15 #include "lib/ramtest.c"
  16
  17 #include <cpu/amd/model_fxx_rev.h>
  18 #include "northbridge/amd/amdk8/incoherent_ht.c"
  19 #include "southbridge/amd/amd8111/amd8111_early_smbus.c"
  20 #include "northbridge/amd/amdk8/raminit.h"
  21 #include "cpu/amd/model_fxx/apic_timer.c"
  22 #include "lib/delay.c"
  23
  24 #include "cpu/x86/lapic/boot_cpu.c"
  25 #include "northbridge/amd/amdk8/reset_test.c"
  26 #include "northbridge/amd/amdk8/debug.c"
  27 #include "superio/winbond/w83627hf/w83627hf_early_serial.c"
  28
  29 #include "cpu/amd/mtrr/amd_earlymtrr.c"
  30 #include "cpu/x86/bist.h"
  31
  32 #include "northbridge/amd/amdk8/setup_resource_map.c"
  33
  34 #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
  35
  36
  37 #include "southbridge/amd/amd8111/amd8111_early_ctrl.c"
  38
  39 static void memreset_setup(void)
  40 {
  41    if (is_cpu_pre_c0()) {
  42         outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16);  //REVC_MEMRST_EN=0
  43    }
  44    else {
  45         outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16);  //REVC_MEMRST_EN=1
  46    }
  47         outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
  48 }
  49
  50 static void memreset(int controllers, const struct mem_controller *ctrl)
  51 {
  52    if (is_cpu_pre_c0()) {
  53         udelay(800);
  54         outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
  55         udelay(90);
  56    }
  57 }
  58 static inline void activate_spd_rom(const struct mem_controller *ctrl)
  59 {
  60 #define SMBUS_HUB 0x18
  61         int ret,i;
  62         unsigned device=(ctrl->channel0[0])>>8;
  63         /* the very first write always get COL_STS=1 and ABRT_STS=1, so try another time*/
  64         i=2;
  65         do {
  66                 ret = smbus_write_byte(SMBUS_HUB, 0x01, device);
  67         } while ((ret!=0) && (i-->0));
  68
  69         smbus_write_byte(SMBUS_HUB, 0x03, 0);
  70 }
  71 #if 0
  72 static inline void change_i2c_mux(unsigned device)
  73 {
  74 #define SMBUS_HUB 0x18
  75         int ret, i;
  76         print_debug("change_i2c_mux i="); print_debug_hex8(device); print_debug("\r\n");
  77         i=2;
  78         do {
  79                 ret = smbus_write_byte(SMBUS_HUB, 0x01, device);
  80                 print_debug("change_i2c_mux 1 ret="); print_debug_hex32(ret); print_debug("\r\n");
  81         } while ((ret!=0) && (i-->0));
  82         ret = smbus_write_byte(SMBUS_HUB, 0x03, 0);
  83         print_debug("change_i2c_mux 2 ret="); print_debug_hex32(ret); print_debug("\r\n");
  84 }
  85 #endif
  86
  87 static inline int spd_read_byte(unsigned device, unsigned address)
  88 {
  89         return smbus_read_byte(device, address);
  90 }
  91
  92 #define QRANK_DIMM_SUPPORT 1
  93
  94 #include "northbridge/amd/amdk8/raminit.c"
  95 #include "northbridge/amd/amdk8/coherent_ht.c"
  96 #include "lib/generic_sdram.c"
  97
  98  /* tyan does not want the default */
  99 #include "resourcemap.c"
 100
 101 #if CONFIG_LOGICAL_CPUS==1
 102 #define SET_NB_CFG_54 1
 103 #endif
 104 #include "cpu/amd/dualcore/dualcore.c"
 105
 106 #define RC0 ((1<<2)<<8)
 107 #define RC1 ((1<<1)<<8)
 108 #define RC2 ((1<<4)<<8)
 109 #define RC3 ((1<<3)<<8)
 110
 111 #define DIMM0 0x50
 112 #define DIMM1 0x51
 113 #define DIMM2 0x52
 114 #define DIMM3 0x53
 115
 116 #include "cpu/amd/car/copy_and_run.c"
 117
 118 #include "cpu/amd/car/post_cache_as_ram.c"
 119
 120 #include "cpu/amd/model_fxx/init_cpus.c"
 121
 122 #include "southbridge/amd/amd8111/amd8111_enable_rom.c"
 123 #include "northbridge/amd/amdk8/early_ht.c"
 124
 125 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 126 {
 127         static const uint16_t spd_addr [] = {
 128                         RC0|DIMM0, RC0|DIMM2, 0, 0,
 129                         RC0|DIMM1, RC0|DIMM3, 0, 0,
 130 #if CONFIG_MAX_PHYSICAL_CPUS > 1
 131                         RC1|DIMM0, RC1|DIMM2, 0, 0,
 132                         RC1|DIMM1, RC1|DIMM3, 0, 0,
 133 #endif
 134 #if CONFIG_MAX_PHYSICAL_CPUS > 2
 135                         RC2|DIMM0, RC2|DIMM2, 0, 0,
 136                         RC2|DIMM1, RC2|DIMM3, 0, 0,
 137                         RC3|DIMM0, RC3|DIMM2, 0, 0,
 138                         RC3|DIMM1, RC3|DIMM3, 0, 0,
 139 #endif
 140         };
 141
 142         int needs_reset;
 143         unsigned bsp_apicid = 0;
 144
 145         struct mem_controller ctrl[8];
 146         unsigned nodes;
 147
 148         if (!((cpu_init_detectedx) || (!boot_cpu()))) {
 149                 /* Nothing special needs to be done to find bus 0 */
 150                 /* Allow the HT devices to be found */
 151
 152                 enumerate_ht_chain();
 153
 154                 amd8111_enable_rom();
 155         }
 156
 157         if (bist == 0) {
 158                 bsp_apicid = init_cpus(cpu_init_detectedx);
 159         }
 160
 161
 162         w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
 163         uart_init();
 164         console_init();
 165
 166         /* Halt if there was a built in self test failure */
 167         report_bist_failure(bist);
 168
 169         setup_s4882_resource_map();
 170
 171         needs_reset = setup_coherent_ht_domain();
 172
 173         wait_all_core0_started();
 174 #if CONFIG_LOGICAL_CPUS==1
 175         // It is said that we should start core1 after all core0 launched
 176         start_other_cores();
 177         wait_all_other_cores_started(bsp_apicid);
 178 #endif
 179
 180         // automatically set that for you, but you might meet tight space
 181         needs_reset |= ht_setup_chains_x();
 182
 183         if (needs_reset) {
 184                 print_info("ht reset -\r\n");
 185                 soft_reset();
 186         }
 187
 188         allow_all_aps_stop(bsp_apicid);
 189
 190         nodes = get_nodes();
 191         //It's the time to set ctrl now;
 192         fill_mem_ctrl(nodes, ctrl, spd_addr);
 193
 194         enable_smbus();
 195
 196         memreset_setup();
 197         sdram_initialize(nodes, ctrl);
 198
 199         post_cache_as_ram();
 200
 201 }