4 #include <device/pci_def.h>
6 #include <device/pnp_def.h>
7 #include <arch/romcc_io.h>
8 #include <cpu/x86/lapic.h>
10 #include "option_table.h"
11 #include "pc80/mc146818rtc_early.c"
12 #include "pc80/serial.c"
13 #include "console/console.c"
14 #include "lib/ramtest.c"
16 #include <cpu/amd/model_fxx_rev.h>
17 #include "northbridge/amd/amdk8/incoherent_ht.c"
18 #include "southbridge/amd/amd8111/amd8111_early_smbus.c"
19 #include "northbridge/amd/amdk8/raminit.h"
20 #include "cpu/amd/model_fxx/apic_timer.c"
21 #include "lib/delay.c"
23 #include "cpu/x86/lapic/boot_cpu.c"
24 #include "northbridge/amd/amdk8/reset_test.c"
25 #include "northbridge/amd/amdk8/debug.c"
26 #include "superio/winbond/w83627hf/w83627hf_early_serial.c"
28 #include "cpu/x86/mtrr/earlymtrr.c"
29 #include "cpu/x86/bist.h"
31 #include "northbridge/amd/amdk8/setup_resource_map.c"
33 #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
35 #include "southbridge/amd/amd8111/amd8111_early_ctrl.c"
37 static void memreset_setup(void)
39 if (is_cpu_pre_c0()) {
40 outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
43 outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
45 outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
48 static void memreset(int controllers, const struct mem_controller *ctrl)
50 if (is_cpu_pre_c0()) {
52 outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
56 static inline void activate_spd_rom(const struct mem_controller *ctrl)
58 #define SMBUS_HUB 0x18
59 unsigned device=(ctrl->channel0[0])>>8;
60 smbus_write_byte(SMBUS_HUB, 0x01, device);
61 smbus_write_byte(SMBUS_HUB, 0x03, 0);
64 static inline void change_i2c_mux(unsigned device)
66 #define SMBUS_HUB 0x18
68 print_debug("change_i2c_mux i="); print_debug_hex8(device); print_debug("\n");
69 ret = smbus_write_byte(SMBUS_HUB, 0x01, device);
70 print_debug("change_i2c_mux 1 ret="); print_debug_hex32(ret); print_debug("\n");
71 ret = smbus_write_byte(SMBUS_HUB, 0x03, 0);
72 print_debug("change_i2c_mux 2 ret="); print_debug_hex32(ret); print_debug("\n");
76 static inline int spd_read_byte(unsigned device, unsigned address)
78 return smbus_read_byte(device, address);
81 #define QRANK_DIMM_SUPPORT 1
83 #include "northbridge/amd/amdk8/raminit.c"
84 #include "northbridge/amd/amdk8/coherent_ht.c"
85 #include "lib/generic_sdram.c"
87 /* tyan does not want the default */
88 #include "resourcemap.c"
90 #if CONFIG_LOGICAL_CPUS==1
91 #define SET_NB_CFG_54 1
93 #include "cpu/amd/dualcore/dualcore.c"
95 #define RC0 ((1<<2)<<8)
96 #define RC1 ((1<<1)<<8)
97 #define RC2 ((1<<4)<<8)
98 #define RC3 ((1<<3)<<8)
107 #include "cpu/amd/car/post_cache_as_ram.c"
109 #include "cpu/amd/model_fxx/init_cpus.c"
111 #include "southbridge/amd/amd8111/amd8111_enable_rom.c"
112 #include "northbridge/amd/amdk8/early_ht.c"
114 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
116 static const struct mem_controller cpu[] = {
119 .f0 = PCI_DEV(0, 0x18, 0),
120 .f1 = PCI_DEV(0, 0x18, 1),
121 .f2 = PCI_DEV(0, 0x18, 2),
122 .f3 = PCI_DEV(0, 0x18, 3),
123 .channel0 = { RC0|DIMM0, RC0|DIMM2, 0, 0 },
124 .channel1 = { RC0|DIMM1, RC0|DIMM3, 0, 0 },
126 #if CONFIG_MAX_PHYSICAL_CPUS > 1
129 .f0 = PCI_DEV(0, 0x19, 0),
130 .f1 = PCI_DEV(0, 0x19, 1),
131 .f2 = PCI_DEV(0, 0x19, 2),
132 .f3 = PCI_DEV(0, 0x19, 3),
133 .channel0 = { RC1|DIMM0, RC1|DIMM2 , 0, 0 },
134 .channel1 = { RC1|DIMM1, RC1|DIMM3 , 0, 0 },
139 #if CONFIG_MAX_PHYSICAL_CPUS > 2
142 .f0 = PCI_DEV(0, 0x1a, 0),
143 .f1 = PCI_DEV(0, 0x1a, 1),
144 .f2 = PCI_DEV(0, 0x1a, 2),
145 .f3 = PCI_DEV(0, 0x1a, 3),
146 .channel0 = { RC2|DIMM0, RC2|DIMM2, 0, 0 },
147 .channel1 = { RC2|DIMM1, RC2|DIMM3, 0, 0 },
152 .f0 = PCI_DEV(0, 0x1b, 0),
153 .f1 = PCI_DEV(0, 0x1b, 1),
154 .f2 = PCI_DEV(0, 0x1b, 2),
155 .f3 = PCI_DEV(0, 0x1b, 3),
156 .channel0 = { RC3|DIMM0, RC3|DIMM2, 0, 0 },
157 .channel1 = { RC3|DIMM1, RC3|DIMM3, 0, 0 },
165 if (!cpu_init_detectedx && boot_cpu()) {
166 /* Nothing special needs to be done to find bus 0 */
167 /* Allow the HT devices to be found */
169 enumerate_ht_chain();
171 amd8111_enable_rom();
175 init_cpus(cpu_init_detectedx);
178 w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
182 /* Halt if there was a built in self test failure */
183 report_bist_failure(bist);
185 setup_s4880_resource_map();
187 needs_reset = setup_coherent_ht_domain();
189 #if CONFIG_LOGICAL_CPUS==1
190 // It is said that we should start core1 after all core0 launched
193 // automatically set that for you, but you might meet tight space
194 needs_reset |= ht_setup_chains_x();
197 print_info("ht reset -\n");
204 sdram_initialize(ARRAY_SIZE(cpu), cpu);