2 * This file is part of the coreboot project.
4 * Copyright (C) 2007 AMD
5 * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
25 #define RAMINIT_SYSINFO 1
27 #define FAM10_SCAN_PCI_BUS 0
28 #define FAM10_ALLOCATE_IO_RANGE 1
30 #define QRANK_DIMM_SUPPORT 1
32 #if CONFIG_LOGICAL_CPUS==1
33 #define SET_NB_CFG_54 1
36 #define FAM10_SET_FIDVID 1
37 #define FAM10_SET_FIDVID_CORE_RANGE 0
39 #define DBGP_DEFAULT 7
43 #include <device/pci_def.h>
44 #include <device/pci_ids.h>
46 #include <device/pnp_def.h>
47 #include <arch/romcc_io.h>
48 #include <cpu/x86/lapic.h>
49 #include "option_table.h"
50 #include "pc80/mc146818rtc_early.c"
52 static void post_code(u8 value) {
56 #if CONFIG_USE_FAILOVER_IMAGE==0
57 #include "pc80/serial.c"
58 #include "arch/i386/lib/console.c"
59 #if CONFIG_USBDEBUG_DIRECT
60 #include "southbridge/nvidia/mcp55/mcp55_enable_usbdebug_direct.c"
61 #include "pc80/usbdebug_direct_serial.c"
63 #include "lib/ramtest.c"
65 #include <cpu/amd/model_10xxx_rev.h>
67 #include "southbridge/nvidia/mcp55/mcp55_early_smbus.c"
68 #include "northbridge/amd/amdfam10/raminit.h"
69 #include "northbridge/amd/amdfam10/amdfam10.h"
73 #include "cpu/x86/lapic/boot_cpu.c"
74 #include "northbridge/amd/amdfam10/reset_test.c"
75 #include "superio/winbond/w83627hf/w83627hf_early_serial.c"
76 #include "superio/winbond/w83627hf/w83627hf_early_init.c"
78 #if CONFIG_USE_FAILOVER_IMAGE==0
80 #include "cpu/x86/bist.h"
82 #include "northbridge/amd/amdfam10/debug.c"
84 #include "cpu/amd/mtrr/amd_earlymtrr.c"
86 #include "northbridge/amd/amdfam10/setup_resource_map.c"
88 #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
90 #include "southbridge/nvidia/mcp55/mcp55_early_ctrl.c"
92 static void memreset_setup(void)
96 static void memreset(int controllers, const struct mem_controller *ctrl)
100 static inline void activate_spd_rom(const struct mem_controller *ctrl)
105 static inline int spd_read_byte(unsigned device, unsigned address)
107 return smbus_read_byte(device, address);
110 #include "northbridge/amd/amdfam10/amdfam10.h"
111 #include "northbridge/amd/amdht/ht_wrapper.c"
113 #include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c"
114 #include "northbridge/amd/amdfam10/raminit_amdmct.c"
115 #include "northbridge/amd/amdfam10/amdfam10_pci.c"
117 #include "resourcemap.c"
119 #include "cpu/amd/quadcore/quadcore.c"
122 #define MCP55_USE_NIC 1
124 #define MCP55_PCI_E_X_0 1
126 #define MCP55_MB_SETUP \
127 RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \
128 RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \
129 RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \
130 RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \
131 RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \
132 RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */
134 #include "southbridge/nvidia/mcp55/mcp55_early_setup_ss.h"
135 #include "southbridge/nvidia/mcp55/mcp55_early_setup_car.c"
137 #include "cpu/amd/car/copy_and_run.c"
139 #include "cpu/amd/car/post_cache_as_ram.c"
141 #include "cpu/amd/model_10xxx/init_cpus.c"
143 #include "cpu/amd/model_10xxx/fidvid.c"
147 #if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
149 #include "southbridge/nvidia/mcp55/mcp55_enable_rom.c"
150 #include "northbridge/amd/amdfam10/early_ht.c"
152 static void sio_setup(void)
158 byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b);
160 pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte);
162 dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0);
165 pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword);
167 dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4);
169 pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword);
173 void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
175 unsigned last_boot_normal_x = last_boot_normal();
177 /* Is this a cpu only reset? or Is this a secondary cpu? */
178 if ((cpu_init_detectedx) || (!boot_cpu())) {
179 if (last_boot_normal_x) {
186 /* Nothing special needs to be done to find bus 0 */
187 /* Allow the HT devices to be found */
189 set_bsp_node_CHtExtNodeCfgEn();
190 enumerate_ht_chain();
194 /* Setup the mcp55 */
197 /* Is this a deliberate reset by the bios */
198 if (bios_reset_detected() && last_boot_normal_x) {
201 /* This is the primary cpu how should I boot? */
202 else if (do_normal_boot()) {
209 __asm__ volatile ("jmp __normal_image"
211 : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
215 #if CONFIG_HAVE_FAILOVER_BOOT==1
216 __asm__ volatile ("jmp __fallback_image"
218 : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
224 void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
226 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
228 #if CONFIG_HAVE_FAILOVER_BOOT==1
229 #if CONFIG_USE_FAILOVER_IMAGE==1
230 failover_process(bist, cpu_init_detectedx);
232 real_main(bist, cpu_init_detectedx);
235 #if CONFIG_USE_FALLBACK_IMAGE == 1
236 failover_process(bist, cpu_init_detectedx);
238 real_main(bist, cpu_init_detectedx);
242 #if CONFIG_USE_FAILOVER_IMAGE==0
243 #include "spd_addr.h"
244 #include "cpu/amd/microcode/microcode.c"
245 #include "cpu/amd/model_10xxx/update_microcode.c"
247 void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
249 struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
259 bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
264 w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
269 /* Halt if there was a built in self test failure */
270 report_bist_failure(bist);
272 #if CONFIG_USBDEBUG_DIRECT
273 mcp55_enable_usbdebug_direct(DBGP_DEFAULT);
274 early_usbdebug_direct_init();
278 printk_debug("BSP Family_Model: %08x\n", val);
279 printk_debug("*sysinfo range: ["); print_debug_hex32((u32)sysinfo); print_debug(","); print_debug_hex32((u32)sysinfo+sizeof(struct sys_info)); print_debug("]\n");
280 printk_debug("bsp_apicid = %02x\n", bsp_apicid);
281 printk_debug("cpu_init_detectedx = %08x\n", cpu_init_detectedx);
283 /* Setup sysinfo defaults */
284 set_sysinfo_in_ram(0);
286 update_microcode(val);
292 amd_ht_init(sysinfo);
295 /* Setup nodes PCI space and start core 0 AP init. */
296 finalize_node_setup(sysinfo);
298 /* Setup any mainboard PCI settings etc. */
299 setup_mb_resource_map();
302 /* wait for all the APs core0 started by finalize_node_setup. */
303 /* FIXME: A bunch of cores are going to start output to serial at once.
304 * It would be nice to fixup prink spinlocks for ROM XIP mode.
305 * I think it could be done by putting the spinlock flag in the cache
306 * of the BSP located right after sysinfo.
308 wait_all_core0_started();
310 #if CONFIG_LOGICAL_CPUS==1
311 /* Core0 on each node is configured. Now setup any additional cores. */
312 printk_debug("start_other_cores()\n");
315 wait_all_other_cores_started(bsp_apicid);
320 #if FAM10_SET_FIDVID == 1
321 msr = rdmsr(0xc0010071);
322 printk_debug("\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo);
324 /* FIXME: The sb fid change may survive the warm reset and only
325 * need to be done once.*/
326 enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
330 if (!warm_reset_detect(0)) { // BSP is node 0
331 init_fidvid_bsp(bsp_apicid, sysinfo->nodes);
333 init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0
338 /* show final fid and vid */
339 msr=rdmsr(0xc0010071);
340 printk_debug("End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo);
343 wants_reset = mcp55_early_setup_x();
345 /* Reset for HT, FIDVID, PLL and errata changes to take affect. */
346 if (!warm_reset_detect(0)) {
347 print_info("...WARM RESET...\n\n\n");
349 die("After soft_reset_x - shouldn't see this message!!!\n");
353 printk_debug("mcp55_early_setup_x wanted additional reset!\n");
357 /* It's the time to set ctrl in sysinfo now; */
358 printk_debug("fill_mem_ctrl()\n");
359 fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
362 printk_debug("enable_smbus()\n");
369 printk_debug("raminit_amdmct()\n");
370 raminit_amdmct(sysinfo);
373 printk_debug("\n*** Yes, the copy/decompress is taking a while, FIXME!\n");
374 post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
375 post_code(0x43); // Should never see this post code.