2 * This file is part of the coreboot project.
4 * Copyright (C) 2007 AMD
5 * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
22 #define FAM10_SCAN_PCI_BUS 0
23 #define FAM10_ALLOCATE_IO_RANGE 1
26 #if CONFIG_LOGICAL_CPUS==1
27 #define SET_NB_CFG_54 1
32 #include <device/pci_def.h>
33 #include <device/pci_ids.h>
35 #include <device/pnp_def.h>
36 #include <arch/romcc_io.h>
37 #include <cpu/x86/lapic.h>
38 #include <console/console.h>
42 #include <cpu/amd/model_10xxx_rev.h>
44 #include "southbridge/nvidia/mcp55/mcp55_early_smbus.c"
45 #include "northbridge/amd/amdfam10/raminit.h"
46 #include "northbridge/amd/amdfam10/amdfam10.h"
48 #include "cpu/amd/model_10xxx/apic_timer.c"
49 #include "lib/delay.c"
50 #include "cpu/x86/lapic/boot_cpu.c"
51 #include "northbridge/amd/amdfam10/reset_test.c"
52 #include "superio/winbond/w83627hf/w83627hf_early_serial.c"
53 #include "superio/winbond/w83627hf/w83627hf_early_init.c"
55 #include "cpu/x86/bist.h"
57 #include "northbridge/amd/amdfam10/debug.c"
59 #include "cpu/x86/mtrr/earlymtrr.c"
61 #include "northbridge/amd/amdfam10/setup_resource_map.c"
63 #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
65 #include "southbridge/nvidia/mcp55/mcp55_early_ctrl.c"
67 static inline void activate_spd_rom(const struct mem_controller *ctrl)
72 static inline int spd_read_byte(unsigned device, unsigned address)
74 return smbus_read_byte(device, address);
77 #include "northbridge/amd/amdfam10/amdfam10.h"
79 #include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c"
80 #include "northbridge/amd/amdfam10/amdfam10_pci.c"
82 #include "resourcemap.c"
84 #include "cpu/amd/quadcore/quadcore.c"
86 #define MCP55_PCI_E_X_0 1
88 #define MCP55_MB_SETUP \
89 RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \
90 RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \
91 RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \
92 RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \
93 RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \
94 RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */
96 #include "southbridge/nvidia/mcp55/mcp55_early_setup_ss.h"
97 #include "southbridge/nvidia/mcp55/mcp55_early_setup_car.c"
99 #include "cpu/amd/car/post_cache_as_ram.c"
101 #include "cpu/amd/microcode/microcode.c"
102 #include "cpu/amd/model_10xxx/update_microcode.c"
103 #include "cpu/amd/model_10xxx/init_cpus.c"
106 #include "southbridge/nvidia/mcp55/mcp55_enable_rom.c"
107 #include "northbridge/amd/amdfam10/early_ht.c"
109 static void sio_setup(void)
114 byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b);
116 pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte);
118 dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0);
121 pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword);
123 dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4);
125 pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword);
128 #include "spd_addr.h"
130 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
132 struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
139 if (!cpu_init_detectedx && boot_cpu()) {
140 /* Nothing special needs to be done to find bus 0 */
141 /* Allow the HT devices to be found */
143 set_bsp_node_CHtExtNodeCfgEn();
144 enumerate_ht_chain();
148 /* Setup the mcp55 */
155 bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
160 w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
163 printk(BIOS_DEBUG, "\n");
165 /* Halt if there was a built in self test failure */
166 report_bist_failure(bist);
169 mcp55_enable_usbdebug(CONFIG_USBDEBUG_DEFAULT_PORT);
170 early_usbdebug_init();
174 printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val);
175 printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1);
176 printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid);
177 printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx);
179 /* Setup sysinfo defaults */
180 set_sysinfo_in_ram(0);
182 update_microcode(val);
188 amd_ht_init(sysinfo);
191 /* Setup nodes PCI space and start core 0 AP init. */
192 finalize_node_setup(sysinfo);
194 /* Setup any mainboard PCI settings etc. */
195 setup_mb_resource_map();
198 /* wait for all the APs core0 started by finalize_node_setup. */
199 /* FIXME: A bunch of cores are going to start output to serial at once.
200 * It would be nice to fixup prink spinlocks for ROM XIP mode.
201 * I think it could be done by putting the spinlock flag in the cache
202 * of the BSP located right after sysinfo.
204 wait_all_core0_started();
206 #if CONFIG_LOGICAL_CPUS==1
207 /* Core0 on each node is configured. Now setup any additional cores. */
208 printk(BIOS_DEBUG, "start_other_cores()\n");
211 wait_all_other_cores_started(bsp_apicid);
216 #if CONFIG_SET_FIDVID
217 msr = rdmsr(0xc0010071);
218 printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo);
220 /* FIXME: The sb fid change may survive the warm reset and only
221 * need to be done once.*/
222 enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
226 if (!warm_reset_detect(0)) { // BSP is node 0
227 init_fidvid_bsp(bsp_apicid, sysinfo->nodes);
229 init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0
234 /* show final fid and vid */
235 msr=rdmsr(0xc0010071);
236 printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo);
239 init_timer(); // Need to use TMICT to synconize FID/VID
241 wants_reset = mcp55_early_setup_x();
243 /* Reset for HT, FIDVID, PLL and errata changes to take affect. */
244 if (!warm_reset_detect(0)) {
245 print_info("...WARM RESET...\n\n\n");
247 die("After soft_reset_x - shouldn't see this message!!!\n");
251 printk(BIOS_DEBUG, "mcp55_early_setup_x wanted additional reset!\n");
255 /* It's the time to set ctrl in sysinfo now; */
256 printk(BIOS_DEBUG, "fill_mem_ctrl()\n");
257 fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
260 printk(BIOS_DEBUG, "enable_smbus()\n");
265 printk(BIOS_DEBUG, "raminit_amdmct()\n");
266 raminit_amdmct(sysinfo);
269 printk(BIOS_DEBUG, "\n*** Yes, the copy/decompress is taking a while, FIXME!\n");
270 post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
271 post_code(0x43); // Should never see this post code.