copy_and_run.c is not needed twice, and it is used on non-car too.
[coreboot.git] / src / mainboard / tyan / s2895 / romstage.c
1 #define K8_ALLOCATE_IO_RANGE 1
2
3 #define QRANK_DIMM_SUPPORT 1
4
5 #if CONFIG_LOGICAL_CPUS==1
6 #define SET_NB_CFG_54 1
7 #endif
8
9 #include <stdint.h>
10 #include <string.h>
11 #include <device/pci_def.h>
12 #include <arch/io.h>
13 #include <device/pnp_def.h>
14 #include <arch/romcc_io.h>
15 #include <cpu/x86/lapic.h>
16 #include "option_table.h"
17 #include "pc80/mc146818rtc_early.c"
18
19 #include "pc80/serial.c"
20 #include "console/console.c"
21 #include "lib/ramtest.c"
22
23 #include <cpu/amd/model_fxx_rev.h>
24
25 #include "northbridge/amd/amdk8/incoherent_ht.c"
26 #include "southbridge/nvidia/ck804/ck804_early_smbus.c"
27 #include "northbridge/amd/amdk8/raminit.h"
28 #include "cpu/amd/model_fxx/apic_timer.c"
29 #include "lib/delay.c"
30
31 #include "cpu/x86/lapic/boot_cpu.c"
32 #include "northbridge/amd/amdk8/reset_test.c"
33 #include "superio/smsc/lpc47b397/lpc47b397_early_serial.c"
34 #include "superio/smsc/lpc47b397/lpc47b397_early_gpio.c"
35 #define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT)
36
37 #define SUPERIO_GPIO_IO_BASE 0x400
38
39 #include "cpu/x86/bist.h"
40
41 #include "northbridge/amd/amdk8/debug.c"
42
43 #include "cpu/amd/mtrr/amd_earlymtrr.c"
44
45 #include "northbridge/amd/amdk8/setup_resource_map.c"
46
47 #define SERIAL_DEV PNP_DEV(0x2e, LPC47B397_SP1)
48
49 static void memreset_setup(void)
50 {
51 }
52
53 static void memreset(int controllers, const struct mem_controller *ctrl)
54 {
55 }
56
57 static void sio_gpio_setup(void){
58
59         unsigned value;
60
61         /*Enable onboard scsi*/
62         lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x2c, (1<<7)|(0<<2)|(0<<1)|(0<<0)); // GP21, offset 0x2c, DISABLE_SCSI_L
63         value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x4c);
64         lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x4c, (value|(1<<1)));
65
66 }
67
68 static inline void activate_spd_rom(const struct mem_controller *ctrl)
69 {
70         /* nothing to do */
71 }
72
73 static inline int spd_read_byte(unsigned device, unsigned address)
74 {
75         return smbus_read_byte(device, address);
76 }
77
78 #include "northbridge/amd/amdk8/raminit.c"
79 #include "northbridge/amd/amdk8/coherent_ht.c"
80 #include "lib/generic_sdram.c"
81
82  /* tyan does not want the default */
83 #include "resourcemap.c"
84
85 #include "cpu/amd/dualcore/dualcore.c"
86
87 #define CK804_NUM 2
88 #define CK804_USE_NIC 1
89 #define CK804_USE_ACI 1
90
91 #include "southbridge/nvidia/ck804/ck804_early_setup_ss.h"
92
93 //set GPIO to input mode
94 #define CK804_MB_SETUP \
95         RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 5, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M9,GPIO6, PCIXB2_PRSNT1_L*/  \
96         RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXB2_PRSNT2_L*/ \
97         RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/  \
98         RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 7, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M5,GPIO8, PCIXA_PRSNT2_L*/   \
99         RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/  \
100         RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/
101
102 #include "southbridge/nvidia/ck804/ck804_early_setup_car.c"
103
104
105 #include "cpu/amd/car/post_cache_as_ram.c"
106
107 #include "cpu/amd/model_fxx/init_cpus.c"
108
109 #include "southbridge/nvidia/ck804/ck804_enable_rom.c"
110 #include "northbridge/amd/amdk8/early_ht.c"
111
112 static void sio_setup(void)
113 {
114
115         unsigned value;
116         uint32_t dword;
117         uint8_t byte;
118
119         pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xac, 0x047f0400);
120
121         byte = pci_read_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b);
122         byte |= 0x20;
123         pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte);
124
125         dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0);
126         dword |= (1<<29)|(1<<0);
127         pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword);
128
129         dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xa4);
130         dword |= (1<<16);
131         pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4, dword);
132
133         lpc47b397_enable_serial(SUPERIO_GPIO_DEV, SUPERIO_GPIO_IO_BASE);
134         value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x77);
135         value &= 0xbf;
136         lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x77, value);
137
138 }
139
140 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
141 {
142         static const uint16_t spd_addr [] = {
143                 (0xa<<3)|0, (0xa<<3)|2, 0, 0,
144                 (0xa<<3)|1, (0xa<<3)|3, 0, 0,
145 #if CONFIG_MAX_PHYSICAL_CPUS > 1
146                 (0xa<<3)|4, (0xa<<3)|6, 0, 0,
147                 (0xa<<3)|5, (0xa<<3)|7, 0, 0,
148 #endif
149         };
150
151         int needs_reset;
152         unsigned bsp_apicid = 0;
153
154         struct mem_controller ctrl[8];
155         unsigned nodes;
156
157         if (!cpu_init_detectedx && boot_cpu()) {
158                 /* Nothing special needs to be done to find bus 0 */
159                 /* Allow the HT devices to be found */
160
161                 enumerate_ht_chain();
162
163                 sio_setup();
164
165                 /* Setup the ck804 */
166                 ck804_enable_rom();
167         }
168
169         if (bist == 0) {
170                 bsp_apicid = init_cpus(cpu_init_detectedx);
171         }
172
173 //      post_code(0x32);
174
175         lpc47b397_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
176         uart_init();
177         console_init();
178
179         /* Halt if there was a built in self test failure */
180         report_bist_failure(bist);
181
182         sio_gpio_setup();
183
184         setup_mb_resource_map();
185
186         needs_reset = setup_coherent_ht_domain();
187
188         wait_all_core0_started();
189 #if CONFIG_LOGICAL_CPUS==1
190         // It is said that we should start core1 after all core0 launched
191         start_other_cores();
192         wait_all_other_cores_started(bsp_apicid);
193 #endif
194
195         needs_reset |= ht_setup_chains_x();
196
197         needs_reset |= ck804_early_setup_x();
198
199         if (needs_reset) {
200                 printk(BIOS_INFO, "ht reset -\n");
201                 soft_reset();
202         }
203
204         allow_all_aps_stop(bsp_apicid);
205
206         nodes = get_nodes();
207         //It's the time to set ctrl now;
208         fill_mem_ctrl(nodes, ctrl, spd_addr);
209
210         enable_smbus();
211
212         memreset_setup();
213         sdram_initialize(nodes, ctrl);
214
215         post_cache_as_ram();
216 }
217