4 #define QRANK_DIMM_SUPPORT 1
6 #if CONFIG_LOGICAL_CPUS==1
7 #define SET_NB_CFG_54 1
12 #include <device/pci_def.h>
14 #include <device/pnp_def.h>
15 #include <arch/romcc_io.h>
16 #include <cpu/x86/lapic.h>
17 #include "option_table.h"
18 #include "pc80/mc146818rtc_early.c"
20 #include "pc80/serial.c"
21 #include "arch/i386/lib/console.c"
22 #include "lib/ramtest.c"
24 #include <cpu/amd/model_fxx_rev.h>
26 #include "northbridge/amd/amdk8/incoherent_ht.c"
27 #include "southbridge/nvidia/ck804/ck804_early_smbus.c"
28 #include "northbridge/amd/amdk8/raminit.h"
29 #include "cpu/amd/model_fxx/apic_timer.c"
30 #include "lib/delay.c"
32 #include "cpu/x86/lapic/boot_cpu.c"
33 #include "northbridge/amd/amdk8/reset_test.c"
34 #include "northbridge/amd/amdk8/debug.c"
35 #include "superio/winbond/w83627hf/w83627hf_early_serial.c"
37 #include "cpu/amd/mtrr/amd_earlymtrr.c"
38 #include "cpu/x86/bist.h"
40 #include "northbridge/amd/amdk8/setup_resource_map.c"
42 #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
44 static void memreset(int controllers, const struct mem_controller *ctrl)
48 static inline void activate_spd_rom(const struct mem_controller *ctrl)
53 static inline int spd_read_byte(unsigned device, unsigned address)
55 return smbus_read_byte(device, address);
58 #include "northbridge/amd/amdk8/raminit.c"
59 #include "northbridge/amd/amdk8/coherent_ht.c"
60 #include "lib/generic_sdram.c"
62 /* tyan does not want the default */
63 #include "resourcemap.c"
65 #include "cpu/amd/dualcore/dualcore.c"
68 #include "southbridge/nvidia/ck804/ck804_early_setup_ss.h"
69 //set GPIO to input mode
70 #define CK804_MB_SETUP \
71 RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXA_PRSNT2_L*/ \
72 RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \
73 RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \
74 RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ \
76 #include "southbridge/nvidia/ck804/ck804_early_setup_car.c"
78 #include "cpu/amd/car/copy_and_run.c"
80 #include "cpu/amd/car/post_cache_as_ram.c"
82 #include "cpu/amd/model_fxx/init_cpus.c"
84 #include "southbridge/nvidia/ck804/ck804_enable_rom.c"
85 #include "northbridge/amd/amdk8/early_ht.c"
87 static void sio_setup(void)
92 byte = pci_read_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b);
94 pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte);
96 dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0);
98 pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword);
101 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
103 static const uint16_t spd_addr [] = {
104 (0xa<<3)|0, (0xa<<3)|2, 0, 0,
105 (0xa<<3)|1, (0xa<<3)|3, 0, 0,
106 #if CONFIG_MAX_PHYSICAL_CPUS > 1
107 (0xa<<3)|4, (0xa<<3)|6, 0, 0,
108 (0xa<<3)|5, (0xa<<3)|7, 0, 0,
113 unsigned bsp_apicid = 0;
115 struct mem_controller ctrl[8];
118 if (!cpu_init_detectedx && boot_cpu()) {
119 /* Nothing special needs to be done to find bus 0 */
120 /* Allow the HT devices to be found */
122 enumerate_ht_chain();
126 /* Setup the ck804 */
131 bsp_apicid = init_cpus(cpu_init_detectedx);
136 w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
140 /* Halt if there was a built in self test failure */
141 report_bist_failure(bist);
143 setup_mb_resource_map();
145 needs_reset = setup_coherent_ht_domain();
147 wait_all_core0_started();
148 #if CONFIG_LOGICAL_CPUS==1
149 // It is said that we should start core1 after all core0 launched
151 wait_all_other_cores_started(bsp_apicid);
154 needs_reset |= ht_setup_chains_x();
156 needs_reset |= ck804_early_setup_x();
159 printk(BIOS_INFO, "ht reset -\n");
163 allow_all_aps_stop(bsp_apicid);
166 //It's the time to set ctrl now;
167 fill_mem_ctrl(nodes, ctrl, spd_addr);
171 sdram_initialize(nodes, ctrl);