1 #define QRANK_DIMM_SUPPORT 1
3 #if CONFIG_LOGICAL_CPUS==1
4 #define SET_NB_CFG_54 1
9 #include <device/pci_def.h>
11 #include <device/pnp_def.h>
12 #include <arch/romcc_io.h>
13 #include <cpu/x86/lapic.h>
14 #include "option_table.h"
15 #include "pc80/mc146818rtc_early.c"
16 #include "pc80/serial.c"
17 #include "console/console.c"
18 #include "lib/ramtest.c"
20 #include <cpu/amd/model_fxx_rev.h>
22 #include "northbridge/amd/amdk8/incoherent_ht.c"
23 #include "southbridge/amd/amd8111/amd8111_early_smbus.c"
24 #include "northbridge/amd/amdk8/raminit.h"
25 #include "cpu/amd/model_fxx/apic_timer.c"
26 #include "lib/delay.c"
28 #include "cpu/x86/lapic/boot_cpu.c"
29 #include "northbridge/amd/amdk8/reset_test.c"
30 #include "northbridge/amd/amdk8/debug.c"
31 #include "superio/winbond/w83627hf/w83627hf_early_serial.c"
33 #include "cpu/x86/mtrr/earlymtrr.c"
34 #include "cpu/x86/bist.h"
36 #include "northbridge/amd/amdk8/setup_resource_map.c"
38 #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
40 #include "southbridge/amd/amd8111/amd8111_early_ctrl.c"
42 static void memreset_setup(void)
44 if (is_cpu_pre_c0()) {
45 outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
48 outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
50 outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
53 static void memreset(int controllers, const struct mem_controller *ctrl)
55 if (is_cpu_pre_c0()) {
57 outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
62 static inline void activate_spd_rom(const struct mem_controller *ctrl)
67 static inline int spd_read_byte(unsigned device, unsigned address)
69 return smbus_read_byte(device, address);
72 #include "northbridge/amd/amdk8/raminit.c"
73 #include "resourcemap.c"
74 #include "northbridge/amd/amdk8/coherent_ht.c"
75 #include "lib/generic_sdram.c"
77 #include "cpu/amd/dualcore/dualcore.c"
81 #include "cpu/amd/car/post_cache_as_ram.c"
83 #include "cpu/amd/model_fxx/init_cpus.c"
85 #include "southbridge/amd/amd8111/amd8111_enable_rom.c"
86 #include "northbridge/amd/amdk8/early_ht.c"
88 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
90 static const uint16_t spd_addr [] = {
91 (0xa<<3)|0, (0xa<<3)|2, 0, 0,
92 (0xa<<3)|1, (0xa<<3)|3, 0, 0,
93 #if CONFIG_MAX_PHYSICAL_CPUS > 1
94 (0xa<<3)|4, (0xa<<3)|6, 0, 0,
95 (0xa<<3)|5, (0xa<<3)|7, 0, 0,
100 unsigned bsp_apicid = 0;
102 struct mem_controller ctrl[8];
105 if (!cpu_init_detectedx && boot_cpu()) {
106 /* Nothing special needs to be done to find bus 0 */
107 /* Allow the HT devices to be found */
109 enumerate_ht_chain();
111 /* Setup the amd8111 */
112 amd8111_enable_rom();
116 bsp_apicid = init_cpus(cpu_init_detectedx);
121 w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
125 /* Halt if there was a built in self test failure */
126 report_bist_failure(bist);
128 setup_s2881_resource_map();
130 dump_pci_device(PCI_DEV(0, 0x18, 0));
131 dump_pci_device(PCI_DEV(0, 0x19, 0));
134 needs_reset = setup_coherent_ht_domain();
136 wait_all_core0_started();
137 #if CONFIG_LOGICAL_CPUS==1
138 // It is said that we should start core1 after all core0 launched
140 wait_all_other_cores_started(bsp_apicid);
143 needs_reset |= ht_setup_chains_x();
146 print_info("ht reset -\n");
152 dump_spd_registers(&cpu[0]);
155 dump_smbus_registers();
158 allow_all_aps_stop(bsp_apicid);
161 //It's the time to set ctrl now;
162 fill_mem_ctrl(nodes, ctrl, spd_addr);
165 sdram_initialize(nodes, ctrl);