3 #include <device/pci_def.h>
5 #include <device/pnp_def.h>
6 #include <arch/romcc_io.h>
7 #include <cpu/x86/lapic.h>
9 #include <pc80/mc146818rtc.h>
10 #include <console/console.h>
13 #include <cpu/amd/model_fxx_rev.h>
14 #include "northbridge/amd/amdk8/incoherent_ht.c"
15 #include "southbridge/amd/amd8111/amd8111_early_smbus.c"
16 #include "northbridge/amd/amdk8/raminit.h"
17 #include "cpu/amd/model_fxx/apic_timer.c"
18 #include "lib/delay.c"
19 #include "cpu/x86/lapic/boot_cpu.c"
20 #include "northbridge/amd/amdk8/reset_test.c"
21 #include "northbridge/amd/amdk8/debug.c"
22 #include "superio/winbond/w83627hf/w83627hf_early_serial.c"
23 #include "cpu/x86/mtrr/earlymtrr.c"
24 #include "cpu/x86/bist.h"
25 #include "northbridge/amd/amdk8/setup_resource_map.c"
26 #include "southbridge/amd/amd8111/amd8111_early_ctrl.c"
28 #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
30 static void memreset_setup(void)
33 outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
35 outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
36 outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
39 static void memreset(int controllers, const struct mem_controller *ctrl)
41 if (is_cpu_pre_c0()) {
43 outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
48 static void activate_spd_rom(const struct mem_controller *ctrl) { }
50 static inline int spd_read_byte(unsigned device, unsigned address)
52 return smbus_read_byte(device, address);
55 #include "northbridge/amd/amdk8/raminit.c"
56 #include "northbridge/amd/amdk8/resourcemap.c"
57 #include "northbridge/amd/amdk8/coherent_ht.c"
58 #include "lib/generic_sdram.c"
59 #include "cpu/amd/dualcore/dualcore.c"
60 #include "cpu/amd/car/post_cache_as_ram.c"
61 #include "cpu/amd/model_fxx/init_cpus.c"
62 #include "southbridge/amd/amd8111/amd8111_enable_rom.c"
63 #include "northbridge/amd/amdk8/early_ht.c"
65 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
67 static const struct mem_controller cpu[] = {
70 .f0 = PCI_DEV(0, 0x18, 0),
71 .f1 = PCI_DEV(0, 0x18, 1),
72 .f2 = PCI_DEV(0, 0x18, 2),
73 .f3 = PCI_DEV(0, 0x18, 3),
74 .channel0 = { DIMM0, DIMM2, 0, 0 },
75 .channel1 = { DIMM1, DIMM3, 0, 0 },
77 #if CONFIG_MAX_PHYSICAL_CPUS > 1
80 .f0 = PCI_DEV(0, 0x19, 0),
81 .f1 = PCI_DEV(0, 0x19, 1),
82 .f2 = PCI_DEV(0, 0x19, 2),
83 .f3 = PCI_DEV(0, 0x19, 3),
84 .channel0 = { DIMM4, DIMM6, 0, 0 },
85 .channel1 = { DIMM5, DIMM7, 0, 0 },
92 if (!cpu_init_detectedx && boot_cpu()) {
93 /* Nothing special needs to be done to find bus 0 */
94 /* Allow the HT devices to be found */
100 init_cpus(cpu_init_detectedx);
102 w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
106 /* Halt if there was a built in self test failure */
107 report_bist_failure(bist);
109 setup_default_resource_map();
111 needs_reset = setup_coherent_ht_domain();
113 #if CONFIG_LOGICAL_CPUS==1
114 // It is said that we should start core1 after all core0 launched
117 // automatically set that for you, but you might meet tight space
118 needs_reset |= ht_setup_chains_x();
121 print_info("ht reset -\n");
128 sdram_initialize(ARRAY_SIZE(cpu), cpu);