janitor task: unify and cleanup naming.
[coreboot.git] / src / mainboard / supermicro / x6dhe_g / romstage.c
1 #define ASSEMBLY 1
2 #define __PRE_RAM__
3 #include <stdint.h>
4 #include <device/pci_def.h>
5 #include <arch/io.h>
6 #include <device/pnp_def.h>
7 #include <arch/romcc_io.h>
8 #include <cpu/x86/lapic.h>
9 #include <stdlib.h>
10 #include "option_table.h"
11 #include "pc80/mc146818rtc_early.c"
12 #include "pc80/serial.c"
13 #include "arch/i386/lib/console.c"
14 #include "lib/ramtest.c"
15 #include "southbridge/intel/esb6300/esb6300_early_smbus.c"
16 #include "northbridge/intel/e7520/raminit.h"
17 #include "superio/winbond/w83627hf/w83627hf.h"
18 #include "cpu/x86/lapic/boot_cpu.c"
19 #include "cpu/x86/mtrr/earlymtrr.c"
20 #include "debug.c"
21 #include "watchdog.c"
22 #include "reset.c"
23 #include "x6dhe_g_fixups.c"
24 #include "superio/winbond/w83627hf/w83627hf_early_init.c"
25 #include "northbridge/intel/e7520/memory_initialized.c"
26 #include "cpu/x86/bist.h"
27
28
29 #define SIO_GPIO_BASE 0x680
30 #define SIO_XBUS_BASE 0x4880
31
32 #define CONSOLE_SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
33 #define HIDDEN_SERIAL_DEV  PNP_DEV(0x2e, W83627HF_SP2)
34
35 #define DEVPRES_CONFIG  ( \
36         DEVPRES_D1F0 | \
37         DEVPRES_D2F0 | \
38         DEVPRES_D3F0 | \
39         DEVPRES_D4F0 | \
40         DEVPRES_D6F0 | \
41         0 )
42 #define DEVPRES1_CONFIG (DEVPRES1_D0F1 | DEVPRES1_D8F0)
43
44 #define RECVENA_CONFIG  0x0808090a
45 #define RECVENB_CONFIG  0x0808090a
46
47 static inline void activate_spd_rom(const struct mem_controller *ctrl)
48 {
49         /* nothing to do */
50 }
51 static inline int spd_read_byte(unsigned device, unsigned address)
52 {
53         return smbus_read_byte(device, address);
54 }
55
56 #include "northbridge/intel/e7520/raminit.c"
57 #include "lib/generic_sdram.c"
58
59
60 static void main(unsigned long bist)
61 {
62         /*
63          * 
64          * 
65          */
66         static const struct mem_controller mch[] = {
67                 {
68                         .node_id = 0,
69                         .f0 = PCI_DEV(0, 0x00, 0),
70                         .f1 = PCI_DEV(0, 0x00, 1),
71                         .f2 = PCI_DEV(0, 0x00, 2),
72                         .f3 = PCI_DEV(0, 0x00, 3),
73                         .channel0 = {(0xa<<3)|0, (0xa<<3)|1, (0xa<<3)|2, (0xa<<3)|3, },
74                         .channel1 = {(0xa<<3)|4, (0xa<<3)|5, (0xa<<3)|6, (0xa<<3)|7, },
75                 }
76         };
77
78         if (bist == 0) {
79                 /* Skip this if there was a built in self test failure */
80                 early_mtrr_init();
81                 if (memory_initialized()) {
82                         asm volatile ("jmp __cpu_reset");
83                 }
84         }
85         /* Setup the console */
86         outb(0x87,0x2e);
87         outb(0x87,0x2e);
88         pnp_write_config(CONSOLE_SERIAL_DEV, 0x24, 0x84 | (1 << 6));
89         w83627hf_enable_dev(CONSOLE_SERIAL_DEV, CONFIG_TTYS0_BASE);
90         uart_init();
91         console_init();
92
93         /* Halt if there was a built in self test failure */
94 //      report_bist_failure(bist);
95
96         /* MOVE ME TO A BETTER LOCATION !!! */
97         /* config LPC decode for flash memory access */
98         device_t dev;
99         dev = pci_locate_device(PCI_ID(0x8086, 0x25a1), 0);
100         if (dev == PCI_DEV_INVALID) {
101                 die("Missing esb6300?");
102         }
103         pci_write_config32(dev, 0xe8, 0x00000000);
104         pci_write_config8(dev, 0xf0, 0x00);
105
106 #if 0
107         display_cpuid_update_microcode();
108 #endif
109 #if 0
110         print_pci_devices();
111 #endif
112 #if 1
113         enable_smbus();
114 #endif
115 #if 0
116 //      dump_spd_registers(&cpu[0]);
117         int i;
118         for(i = 0; i < 1; i++) {
119                 dump_spd_registers();
120         }
121 #endif
122         disable_watchdogs();
123 //      dump_ipmi_registers();
124 //      mainboard_set_e7520_leds();     
125 //      memreset_setup();
126         sdram_initialize(ARRAY_SIZE(mch), mch);
127 #if 0
128         dump_pci_devices();
129 #endif
130 #if 0
131         dump_pci_device(PCI_DEV(0, 0x00, 0));
132         dump_bar14(PCI_DEV(0, 0x00, 0));
133 #endif
134
135 #if 0 // temporarily disabled 
136         /* Check the first 1M */
137 //      ram_check(0x00000000, 0x000100000);
138 //      ram_check(0x00000000, 0x000a0000);
139         ram_check(0x00100000, 0x01000000);
140         /* check the first 1M in the 3rd Gig */
141         ram_check(0x30100000, 0x31000000);
142 #endif
143 #if 0
144         ram_check(0x00000000, 0x02000000);
145 #endif
146         
147 #if 0   
148         while(1) {
149                 hlt();
150         }
151 #endif
152 }