Move the SET_FIDVID* family of configuration options to Kconfig and
[coreboot.git] / src / mainboard / nvidia / l1_2pvv / romstage.c
1 /*
2  * This file is part of the coreboot project.
3  *
4  * Copyright (C) 2007 AMD
5  * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License as published by
9  * the Free Software Foundation; either version 2 of the License, or
10  * (at your option) any later version.
11  *
12  * This program is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15  * GNU General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program; if not, write to the Free Software
19  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
20  */
21
22 #if CONFIG_LOGICAL_CPUS==1
23 #define SET_NB_CFG_54 1
24 #endif
25
26 #if CONFIG_K8_REV_F_SUPPORT == 1
27 #define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0
28 #endif
29
30 #include <stdint.h>
31 #include <string.h>
32 #include <device/pci_def.h>
33 #include <device/pci_ids.h>
34 #include <arch/io.h>
35 #include <device/pnp_def.h>
36 #include <arch/romcc_io.h>
37 #include <cpu/x86/lapic.h>
38 #include <pc80/mc146818rtc.h>
39
40 #include <console/console.h>
41 #include <usbdebug.h>
42 #include <lib.h>
43
44 #include <cpu/amd/model_fxx_rev.h>
45
46 #include "southbridge/nvidia/mcp55/mcp55_early_smbus.c"
47 #include "northbridge/amd/amdk8/raminit.h"
48 #include "cpu/amd/model_fxx/apic_timer.c"
49 #include "lib/delay.c"
50
51 #include "cpu/x86/lapic/boot_cpu.c"
52 #include "northbridge/amd/amdk8/reset_test.c"
53 #include "superio/winbond/w83627ehg/w83627ehg_early_serial.c"
54 #include "superio/winbond/w83627ehg/w83627ehg_early_init.c"
55
56 #include "cpu/x86/bist.h"
57
58 #include "northbridge/amd/amdk8/debug.c"
59
60 #include "cpu/x86/mtrr/earlymtrr.c"
61
62 #include "northbridge/amd/amdk8/setup_resource_map.c"
63
64 #define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1)
65
66 #include "southbridge/nvidia/mcp55/mcp55_early_ctrl.c"
67
68 static void memreset(int controllers, const struct mem_controller *ctrl)
69 {
70 }
71
72 static inline void activate_spd_rom(const struct mem_controller *ctrl)
73 {
74         /* nothing to do */
75 }
76
77 static inline int spd_read_byte(unsigned device, unsigned address)
78 {
79         return smbus_read_byte(device, address);
80 }
81
82 #include "northbridge/amd/amdk8/amdk8_f.h"
83 #include "northbridge/amd/amdk8/incoherent_ht.c"
84 #include "northbridge/amd/amdk8/coherent_ht.c"
85 #include "northbridge/amd/amdk8/raminit_f.c"
86 #include "lib/generic_sdram.c"
87
88 #include "resourcemap.c"
89
90 #include "cpu/amd/dualcore/dualcore.c"
91
92 #define MCP55_PCI_E_X_0 2
93 #define MCP55_PCI_E_X_1 4
94
95 #define MCP55_MB_SETUP \
96         RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \
97         RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \
98         RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \
99         RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \
100         RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \
101         RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */
102
103 #include "southbridge/nvidia/mcp55/mcp55_early_setup_ss.h"
104 #include "southbridge/nvidia/mcp55/mcp55_early_setup_car.c"
105
106
107
108 #include "cpu/amd/car/post_cache_as_ram.c"
109
110 #include "cpu/amd/model_fxx/init_cpus.c"
111
112 #include "cpu/amd/model_fxx/fidvid.c"
113
114 #include "southbridge/nvidia/mcp55/mcp55_enable_rom.c"
115 #include "northbridge/amd/amdk8/early_ht.c"
116
117 static void sio_setup(void)
118 {
119         uint32_t dword;
120         uint8_t byte;
121
122         byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b);
123         byte |= 0x20;
124         pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte);
125
126         dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0);
127         dword |= (1<<0);
128         pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword);
129
130         dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4);
131         dword |= (1<<16);
132         pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword);
133 }
134
135 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
136 {
137         static const uint16_t spd_addr [] = {
138                         // Node 0
139                         (0xa<<3)|0, (0xa<<3)|2, 0, 0,
140                         (0xa<<3)|1, (0xa<<3)|3, 0, 0,
141                         // Node 1
142                         (0xa<<3)|4, (0xa<<3)|6, 0, 0,
143                         (0xa<<3)|5, (0xa<<3)|7, 0, 0,
144         };
145
146         struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE
147                 + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
148
149         int needs_reset = 0;
150         unsigned bsp_apicid = 0;
151
152         if (!cpu_init_detectedx && boot_cpu()) {
153                 /* Nothing special needs to be done to find bus 0 */
154                 /* Allow the HT devices to be found */
155
156                 enumerate_ht_chain();
157
158                 sio_setup();
159
160                 /* Setup the mcp55 */
161                 mcp55_enable_rom();
162         }
163
164         if (bist == 0) {
165                 bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
166         }
167
168         pnp_enter_ext_func_mode(SERIAL_DEV);
169         pnp_write_config(SERIAL_DEV, 0x24, 0);
170         w83627ehg_enable_dev(SERIAL_DEV, CONFIG_TTYS0_BASE);
171         pnp_exit_ext_func_mode(SERIAL_DEV);
172
173         setup_mb_resource_map();
174
175         uart_init();
176
177         /* Halt if there was a built in self test failure */
178         report_bist_failure(bist);
179
180 #if CONFIG_USBDEBUG
181         mcp55_enable_usbdebug(CONFIG_USBDEBUG_DEFAULT_PORT);
182         early_usbdebug_init();
183 #endif
184         console_init();
185         printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1);
186
187         print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\n");
188
189 #if CONFIG_MEM_TRAIN_SEQ == 1
190         set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram
191 #endif
192         setup_coherent_ht_domain(); // routing table and start other core0
193
194         wait_all_core0_started();
195 #if CONFIG_LOGICAL_CPUS==1
196         // It is said that we should start core1 after all core0 launched
197         /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain,
198          * So here need to make sure last core0 is started, esp for two way system,
199          * (there may be apic id conflicts in that case)
200          */
201         start_other_cores();
202         wait_all_other_cores_started(bsp_apicid);
203 #endif
204
205         /* it will set up chains and store link pair for optimization later */
206         ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
207
208 #if CONFIG_SET_FIDVID
209
210         {
211                 msr_t msr;
212                 msr=rdmsr(0xc0010042);
213                 print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
214
215         }
216
217         enable_fid_change();
218
219         enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
220
221         init_fidvid_bsp(bsp_apicid);
222
223         // show final fid and vid
224         {
225                 msr_t msr;
226                 msr=rdmsr(0xc0010042);
227                 print_debug("end   msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
228
229         }
230 #endif
231         init_timer(); /* Need to use TMICT to synconize FID/VID. */
232
233         needs_reset |= optimize_link_coherent_ht();
234         needs_reset |= optimize_link_incoherent_ht(sysinfo);
235         needs_reset |= mcp55_early_setup_x();
236
237         // fidvid change will issue one LDTSTOP and the HT change will be effective too
238         if (needs_reset) {
239                 print_info("ht reset -\n");
240                 soft_reset();
241         }
242         allow_all_aps_stop(bsp_apicid);
243
244         //It's the time to set ctrl in sysinfo now;
245         fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
246
247         enable_smbus();
248
249         /* all ap stopped? */
250
251         sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
252
253         post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now
254
255 }
256