2 * This file is part of the coreboot project.
4 * Copyright (C) 2006 Tyan
5 * Copyright (C) 2006 AMD
6 * Written by Yinghai Lu <yinghailu@gmail.com> for Tyan and AMD.
8 * Copyright (C) 2006 MSI
9 * Written by bxshi <bingxunshi@gmail.com> for MSI.
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
26 #define RAMINIT_SYSINFO 1
27 #define CACHE_AS_RAM_ADDRESS_DEBUG 0
29 #define SET_NB_CFG_54 1
32 #define QRANK_DIMM_SUPPORT 1
34 //used by incoherent_ht
35 //#define K8_ALLOCATE_IO_RANGE 1
37 //used by init_cpus and fidvid
39 //if we want to wait for core1 done before DQS training, set it to 0
40 #define SET_FIDVID_CORE0_ONLY 1
44 #include <device/pci_def.h>
45 #include <device/pci_ids.h>
47 #include <device/pnp_def.h>
48 #include <arch/romcc_io.h>
49 #include <cpu/x86/lapic.h>
50 #include "option_table.h"
51 #include "pc80/mc146818rtc_early.c"
52 #include "pc80/serial.c"
53 #include "console/console.c"
55 #include <cpu/amd/model_fxx_rev.h>
56 #include "southbridge/broadcom/bcm5785/bcm5785_early_smbus.c"
57 #include "northbridge/amd/amdk8/raminit.h"
58 #include "cpu/amd/model_fxx/apic_timer.c"
59 #include "lib/delay.c"
62 #include "cpu/x86/lapic/boot_cpu.c"
63 #include "northbridge/amd/amdk8/reset_test.c"
64 #include "northbridge/amd/amdk8/debug.c"
65 #include "superio/nsc/pc87417/pc87417_early_serial.c"
66 #include "cpu/x86/mtrr/earlymtrr.c"
67 #include "cpu/x86/bist.h"
69 #include "northbridge/amd/amdk8/setup_resource_map.c"
71 #define SERIAL_DEV PNP_DEV(0x2e, PC87417_SP1)
72 #define RTC_DEV PNP_DEV(0x2e, PC87417_RTC)
73 #include "southbridge/broadcom/bcm5785/bcm5785_early_setup.c"
75 static void memreset(int controllers, const struct mem_controller *ctrl)
79 static inline void activate_spd_rom(const struct mem_controller *ctrl)
81 #define SMBUS_SWITCH1 0x70
82 #define SMBUS_SWITCH2 0x72
83 unsigned device = (ctrl->channel0[0]) >> 8;
84 smbus_send_byte(SMBUS_SWITCH1, device & 0x0f);
85 smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f );
89 static inline void change_i2c_mux(unsigned device)
91 #define SMBUS_SWITCH1 0x70
92 #define SMBUS_SWITCH2 0x72
93 smbus_send_byte(SMBUS_SWITCH1, device & 0x0f);
94 smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f );
98 static inline int spd_read_byte(unsigned device, unsigned address)
100 return smbus_read_byte(device, address);
103 #include "northbridge/amd/amdk8/amdk8_f.h"
104 #include "northbridge/amd/amdk8/incoherent_ht.c"
105 #include "northbridge/amd/amdk8/coherent_ht.c"
106 #include "northbridge/amd/amdk8/raminit_f.c"
107 #include "lib/generic_sdram.c"
109 /* msi does not want the default */
110 #include "resourcemap.c"
112 #include "cpu/amd/dualcore/dualcore.c"
114 #define RC0 (0x10<<8)
115 #define RC1 (0x01<<8)
126 #include "cpu/amd/car/post_cache_as_ram.c"
128 #include "cpu/amd/model_fxx/init_cpus.c"
130 #include "cpu/amd/model_fxx/fidvid.c"
132 #include "northbridge/amd/amdk8/early_ht.c"
134 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
136 static const uint16_t spd_addr[] = {
138 RC0|DIMM0, RC0|DIMM2, RC0|DIMM4, RC0|DIMM6,
139 RC0|DIMM1, RC0|DIMM3, RC0|DIMM5, RC0|DIMM7,
141 RC1|DIMM0, RC1|DIMM2, RC1|DIMM4, RC1|DIMM6,
142 RC1|DIMM1, RC1|DIMM3, RC1|DIMM5, RC1|DIMM7,
145 struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE +
146 CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
149 unsigned bsp_apicid = 0;
151 if (!cpu_init_detectedx && boot_cpu()) {
152 /* Nothing special needs to be done to find bus 0 */
153 /* Allow the HT devices to be found */
155 enumerate_ht_chain();
157 bcm5785_enable_rom();
159 bcm5785_enable_lpc();
162 pc87417_enable_dev(RTC_DEV);
166 bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
171 pc87417_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
175 // dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE);
177 /* Halt if there was a built in self test failure */
178 report_bist_failure(bist);
180 printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1);
182 setup_ms9185_resource_map();
184 dump_pci_device(PCI_DEV(0, 0x18, 0));
185 dump_pci_device(PCI_DEV(0, 0x19, 0));
188 print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\n");
190 setup_coherent_ht_domain();
192 wait_all_core0_started();
193 #if CONFIG_LOGICAL_CPUS==1
194 // It is said that we should start core1 after all core0 launched
195 /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain,
196 * So here need to make sure last core0 is started, esp for two way system,
197 * (there may be apic id conflicts in that case)
200 //bx_a010- wait_all_other_cores_started(bsp_apicid);
203 /* it will set up chains and store link pair for optimization later */
204 ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
206 bcm5785_early_setup();
209 //it your CPU min fid is 1G, you can change HT to 1G and FID to max one time.
210 needs_reset = optimize_link_coherent_ht();
211 needs_reset |= optimize_link_incoherent_ht(sysinfo);
218 msr=rdmsr(0xc0010042);
219 print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
225 enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
227 init_fidvid_bsp(bsp_apicid);
229 // show final fid and vid
232 msr=rdmsr(0xc0010042);
233 print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
239 needs_reset = optimize_link_coherent_ht();
240 needs_reset |= optimize_link_incoherent_ht(sysinfo);
242 // fidvid change will issue one LDTSTOP and the HT change will be effective too
244 print_info("ht reset -\n");
248 allow_all_aps_stop(bsp_apicid);
250 //It's the time to set ctrl in sysinfo now;
251 fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
258 activate_spd_rom(sysinfo->ctrl+i);
259 dump_smbus_registers();
265 for(i=1;i<256;i<<=1) {
267 dump_smbus_registers();
271 //do we need apci timer, tsc...., only debug need it for better output
272 /* all ap stopped? */
273 // init_timer(); // Need to use TMICT to synconize FID/VID
275 sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
282 // dump_pci_devices();
283 dump_pci_device_index_wait(PCI_DEV(0, 0x18, 2), 0x98);
284 dump_pci_device_index_wait(PCI_DEV(0, 0x19, 2), 0x98);