1 /* This file was generated by getpir.c, do not modify!
2 (but if you do, please run checkpir on it to verify)
3 * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up
5 * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
8 #include <arch/pirq_routing.h>
10 const struct irq_routing_table intel_irq_routing_table = {
11 PIRQ_SIGNATURE, /* u32 signature */
12 PIRQ_VERSION, /* u16 version */
13 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */
14 0x00, /* Where the interrupt router lies (bus) */
15 (0x00<<3)|0x0, /* Where the interrupt router lies (dev) */
16 0, /* IRQs devoted exclusively to PCI usage */
19 0, /* Miniport data */
20 { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
21 0x50, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
23 /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
24 {0x00,(0x12<<3)|0x0, {{0x30, 0x8000}, {0x00, 0x0}, {0x00, 0x0}, {0x00, 0x00}}, 0x0, 0x0},
25 {0x00,(0x14<<3)|0x0, {{0x30, 0x8000}, {0x31, 0x0}, {0x32, 0x0}, {0x33, 0x00}}, 0x0, 0x0},
28 unsigned long write_pirq_routing_table(unsigned long addr)
30 return copy_pirq_routing_table(addr);