Move QRANK_DIMM_SUPPORT to Kconfig, removing it from romstage.c
[coreboot.git] / src / mainboard / arima / hdama / romstage.c
1 #include <stdint.h>
2 #include <string.h>
3 #include <device/pci_def.h>
4 #include <arch/io.h>
5 #include <device/pnp_def.h>
6 #include <arch/romcc_io.h>
7 #include <cpu/x86/lapic.h>
8 #include <pc80/mc146818rtc.h>
9 #include <console/console.h>
10
11 #include <cpu/amd/model_fxx_rev.h>
12 #include "northbridge/amd/amdk8/incoherent_ht.c"
13 #include "southbridge/amd/amd8111/amd8111_early_smbus.c"
14 #include "northbridge/amd/amdk8/raminit.h"
15 #include "cpu/amd/model_fxx/apic_timer.c"
16 #include "lib/delay.c"
17
18 #include "cpu/x86/lapic/boot_cpu.c"
19 #include "northbridge/amd/amdk8/reset_test.c"
20 #include "northbridge/amd/amdk8/debug.c"
21 #include "superio/nsc/pc87360/pc87360_early_serial.c"
22
23 #include "cpu/x86/mtrr/earlymtrr.c"
24 #include "cpu/x86/bist.h"
25
26 #include "northbridge/amd/amdk8/setup_resource_map.c"
27
28 #define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1)
29
30 #include "southbridge/amd/amd8111/amd8111_early_ctrl.c"
31
32 /*
33  * GPIO28 of 8111 will control H0_MEMRESET_L
34  * GPIO29 of 8111 will control H1_MEMRESET_L
35  */
36 static void memreset_setup(void)
37 {
38         if (is_cpu_pre_c0()) {
39                 /* Set the memreset low */
40                 outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28);
41                 /* Ensure the BIOS has control of the memory lines */
42                 outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29);
43         }
44         else {
45                 /* Ensure the CPU has controll of the memory lines */
46                 outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29);
47         }
48 }
49
50 static void memreset(int controllers, const struct mem_controller *ctrl)
51 {
52         if (is_cpu_pre_c0()) {
53                 udelay(800);
54                 /* Set memreset_high */
55                 outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28);
56                 udelay(90);
57         }
58 }
59
60 static inline void activate_spd_rom(const struct mem_controller *ctrl)
61 {
62         /* nothing to do */
63 }
64
65 static inline int spd_read_byte(unsigned device, unsigned address)
66 {
67         return smbus_read_byte(device, address);
68 }
69
70
71 #include "northbridge/amd/amdk8/raminit.c"
72 #include "northbridge/amd/amdk8/resourcemap.c"
73 #include "northbridge/amd/amdk8/coherent_ht.c"
74 #include "lib/generic_sdram.c"
75
76 #if CONFIG_LOGICAL_CPUS==1
77 #define SET_NB_CFG_54 1
78 #endif
79 #include "cpu/amd/dualcore/dualcore.c"
80
81 #define FIRST_CPU  1
82 #define SECOND_CPU 1
83 #define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
84
85
86
87 #include "cpu/amd/car/post_cache_as_ram.c"
88
89 #include "cpu/amd/model_fxx/init_cpus.c"
90
91 #include "southbridge/amd/amd8111/amd8111_enable_rom.c"
92 #include "northbridge/amd/amdk8/early_ht.c"
93
94 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
95 {
96         static const uint16_t spd_addr [] = {
97                 (0xa<<3)|0, (0xa<<3)|2, 0, 0,
98                 (0xa<<3)|1, (0xa<<3)|3, 0, 0,
99 #if CONFIG_MAX_PHYSICAL_CPUS > 1
100                 (0xa<<3)|4, (0xa<<3)|6, 0, 0,
101                 (0xa<<3)|5, (0xa<<3)|7, 0, 0,
102 #endif
103         };
104
105         int needs_reset;
106         unsigned bsp_apicid = 0;
107         struct mem_controller ctrl[8];
108         unsigned nodes;
109
110         if (!cpu_init_detectedx && boot_cpu()) {
111                 /* Nothing special needs to be done to find bus 0 */
112                 /* Allow the HT devices to be found */
113
114                 enumerate_ht_chain();
115
116                 amd8111_enable_rom();
117         }
118
119         if (bist == 0) {
120                 bsp_apicid = init_cpus(cpu_init_detectedx);
121         }
122
123         pc87360_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
124         uart_init();
125         console_init();
126
127         /* Halt if there was a built in self test failure */
128         report_bist_failure(bist);
129
130         setup_default_resource_map();
131
132         needs_reset = setup_coherent_ht_domain();
133
134 #if CONFIG_LOGICAL_CPUS==1
135         // It is said that we should start core1 after all core0 launched
136         start_other_cores();
137         wait_all_other_cores_started(bsp_apicid);
138 #endif
139         /* This is needed to be able to call udelay().  It could be moved to
140          * memreset_setup, since udelay is called in memreset. */
141         init_timer();
142
143         // automatically set that for you, but you might meet tight space
144         needs_reset |= ht_setup_chains_x();
145
146         if (needs_reset) {
147                 print_info("ht reset -\n");
148                 soft_reset();
149         }
150
151         allow_all_aps_stop(bsp_apicid);
152
153         nodes = get_nodes();
154
155         fill_mem_ctrl(nodes, ctrl, spd_addr);
156
157         enable_smbus();
158
159         memreset_setup();
160
161         sdram_initialize(nodes, ctrl);
162
163         post_cache_as_ram();
164 }
165