src/mainboard/amd/serengeti_cheetah/romstage.c

   1 #define RAMINIT_SYSINFO 1
   2 #define CACHE_AS_RAM_ADDRESS_DEBUG 0
   3
   4 #define SET_NB_CFG_54 1
   5
   6 //used by raminit
   7 #define QRANK_DIMM_SUPPORT 1
   8
   9 //used by incoherent_ht
  10 //#define K8_ALLOCATE_IO_RANGE 1
  11
  12 //used by init_cpus and fidvid
  13 #define SET_FIDVID 0
  14 //if we want to wait for core1 done before DQS training, set it to 0
  15 #define SET_FIDVID_CORE0_ONLY 1
  16
  17 #if CONFIG_K8_REV_F_SUPPORT == 1
  18 #define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0
  19 #endif
  20
  21 #include <stdint.h>
  22 #include <string.h>
  23 #include <device/pci_def.h>
  24 #include <device/pci_ids.h>
  25 #include <arch/io.h>
  26 #include <device/pnp_def.h>
  27 #include <arch/romcc_io.h>
  28 #include <cpu/x86/lapic.h>
  29 #include "option_table.h"
  30 #include "pc80/mc146818rtc_early.c"
  31
  32 #include "pc80/serial.c"
  33 #include "console/console.c"
  34 #include <cpu/amd/model_fxx_rev.h>
  35 #include "southbridge/amd/amd8111/amd8111_early_smbus.c"
  36 #include <reset.h>
  37 #include "northbridge/amd/amdk8/raminit.h"
  38 #include "cpu/amd/model_fxx/apic_timer.c"
  39
  40 #include "cpu/x86/lapic/boot_cpu.c"
  41 #include "northbridge/amd/amdk8/reset_test.c"
  42
  43 #include "cpu/x86/bist.h"
  44
  45 #include "lib/delay.c"
  46
  47 #include "northbridge/amd/amdk8/debug.c"
  48 #include "cpu/x86/mtrr/earlymtrr.c"
  49 #include <cpu/amd/mtrr.h>
  50 #include "superio/winbond/w83627hf/w83627hf_early_serial.c"
  51
  52 #include "northbridge/amd/amdk8/setup_resource_map.c"
  53
  54 #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
  55
  56 #include "southbridge/amd/amd8111/amd8111_early_ctrl.c"
  57
  58 static void memreset_setup(void)
  59 {
  60         //GPIO on amd8111 to enable MEMRST ????
  61         outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16);  //REVC_MEMRST_EN=1
  62         outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
  63 }
  64
  65 static void memreset(int controllers, const struct mem_controller *ctrl)
  66 {
  67 }
  68
  69 static inline void activate_spd_rom(const struct mem_controller *ctrl)
  70 {
  71 #define SMBUS_HUB 0x18
  72         int ret,i;
  73         unsigned device=(ctrl->channel0[0])>>8;
  74         /* the very first write always get COL_STS=1 and ABRT_STS=1, so try another time*/
  75         i=2;
  76         do {
  77                 ret = smbus_write_byte(SMBUS_HUB, 0x01, device);
  78         } while ((ret!=0) && (i-->0));
  79
  80         smbus_write_byte(SMBUS_HUB, 0x03, 0);
  81 }
  82 #if 0
  83 static inline void change_i2c_mux(unsigned device)
  84 {
  85 #define SMBUS_HUB 0x18
  86         int ret, i;
  87         print_debug("change_i2c_mux i="); print_debug_hex8(device); print_debug("\n");
  88         i=2;
  89         do {
  90                 ret = smbus_write_byte(SMBUS_HUB, 0x01, device);
  91                 print_debug("change_i2c_mux 1 ret="); print_debug_hex32(ret); print_debug("\n");
  92         } while ((ret!=0) && (i-->0));
  93         ret = smbus_write_byte(SMBUS_HUB, 0x03, 0);
  94         print_debug("change_i2c_mux 2 ret="); print_debug_hex32(ret); print_debug("\n");
  95 }
  96 #endif
  97
  98 static inline int spd_read_byte(unsigned device, unsigned address)
  99 {
 100         return smbus_read_byte(device, address);
 101 }
 102
 103 #include "northbridge/amd/amdk8/amdk8.h"
 104 #include "northbridge/amd/amdk8/coherent_ht.c"
 105
 106 #include "northbridge/amd/amdk8/incoherent_ht.c"
 107
 108 #include "northbridge/amd/amdk8/raminit_f.c"
 109
 110 #include "lib/generic_sdram.c"
 111
 112  /* tyan does not want the default */
 113 #include "resourcemap.c"
 114
 115 #include "cpu/amd/dualcore/dualcore.c"
 116
 117 #define RC0 ((1<<0)<<8)
 118 #define RC1 ((1<<1)<<8)
 119 #define RC2 ((1<<2)<<8)
 120 #define RC3 ((1<<3)<<8)
 121
 122 #define DIMM0 0x50
 123 #define DIMM1 0x51
 124 #define DIMM2 0x52
 125 #define DIMM3 0x53
 126 #define DIMM4 0x54
 127 #define DIMM5 0x55
 128 #define DIMM6 0x56
 129 #define DIMM7 0x57
 130
 131
 132 #include "cpu/amd/car/post_cache_as_ram.c"
 133
 134 #include "cpu/amd/model_fxx/init_cpus.c"
 135
 136 #include "cpu/amd/model_fxx/fidvid.c"
 137
 138 #include "southbridge/amd/amd8111/amd8111_enable_rom.c"
 139 #include "northbridge/amd/amdk8/early_ht.c"
 140
 141 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 142 {
 143         static const uint16_t spd_addr[] = {
 144                         //first node
 145                         RC0|DIMM0, RC0|DIMM2, 0, 0,
 146                         RC0|DIMM1, RC0|DIMM3, 0, 0,
 147 #if CONFIG_MAX_PHYSICAL_CPUS > 1
 148                         //second node
 149                         RC1|DIMM0, RC1|DIMM2, RC1|DIMM4, RC1|DIMM6,
 150                         RC1|DIMM1, RC1|DIMM3, RC1|DIMM5, RC1|DIMM7,
 151 #endif
 152 #if CONFIG_MAX_PHYSICAL_CPUS > 2
 153                         // third node
 154                         RC2|DIMM0, RC2|DIMM2, 0, 0,
 155                         RC2|DIMM1, RC2|DIMM3, 0, 0,
 156                         // four node
 157                         RC3|DIMM0, RC3|DIMM2, RC3|DIMM4, RC3|DIMM6,
 158                         RC3|DIMM1, RC3|DIMM3, RC3|DIMM5, RC3|DIMM7,
 159 #endif
 160
 161         };
 162
 163         struct sys_info *sysinfo = (void*)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
 164
 165         int needs_reset;
 166         unsigned bsp_apicid = 0;
 167 #if SET_FIDVID == 1
 168         struct cpuid_result cpuid1;
 169 #endif
 170
 171         if (!cpu_init_detectedx && boot_cpu()) {
 172                 /* Nothing special needs to be done to find bus 0 */
 173                 /* Allow the HT devices to be found */
 174
 175                 enumerate_ht_chain();
 176
 177                 /* Setup the rom access for 4M */
 178                 amd8111_enable_rom();
 179         }
 180
 181         if (bist == 0) {
 182                 bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
 183         }
 184
 185 //      post_code(0x32);
 186
 187         w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
 188         uart_init();
 189         console_init();
 190
 191 //      dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE);
 192
 193         /* Halt if there was a built in self test failure */
 194         report_bist_failure(bist);
 195
 196         printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1);
 197
 198         setup_mb_resource_map();
 199 #if 0
 200         dump_pci_device(PCI_DEV(0, 0x18, 0));
 201         dump_pci_device(PCI_DEV(0, 0x19, 0));
 202 #endif
 203
 204         print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\n");
 205
 206 #if CONFIG_MEM_TRAIN_SEQ == 1
 207         set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram
 208 #endif
 209         setup_coherent_ht_domain(); // routing table and start other core0
 210
 211         wait_all_core0_started();
 212 #if CONFIG_LOGICAL_CPUS==1
 213         // It is said that we should start core1 after all core0 launched
 214         /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain,
 215          * So here need to make sure last core0 is started, esp for two way system,
 216          * (there may be apic id conflicts in that case)
 217          */
 218         start_other_cores();
 219         wait_all_other_cores_started(bsp_apicid);
 220 #endif
 221
 222         /* it will set up chains and store link pair for optimization later */
 223         ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
 224
 225 #if 0
 226         //it your CPU min fid is 1G, you can change HT to 1G and FID to max one time.
 227         needs_reset = optimize_link_coherent_ht();
 228         needs_reset |= optimize_link_incoherent_ht(sysinfo);
 229 #endif
 230
 231 #if SET_FIDVID == 1
 232         /* Check to see if processor is capable of changing FIDVID  */
 233         /* otherwise it will throw a GP# when reading FIDVID_STATUS */
 234         cpuid1 = cpuid(0x80000007);
 235         if( (cpuid1.edx & 0x6) == 0x6 ) {
 236
 237         {
 238                 /* Read FIDVID_STATUS */
 239                 msr_t msr;
 240                 msr=rdmsr(0xc0010042);
 241                 print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
 242
 243         }
 244
 245         enable_fid_change();
 246
 247         enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
 248
 249         init_fidvid_bsp(bsp_apicid);
 250
 251         // show final fid and vid
 252         {
 253                 msr_t msr;
 254                 msr=rdmsr(0xc0010042);
 255                 print_debug("end   msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
 256
 257         }
 258
 259         } else {
 260                 print_debug("Changing FIDVID not supported\n");
 261         }
 262
 263 #endif
 264
 265 #if 1
 266         needs_reset = optimize_link_coherent_ht();
 267         needs_reset |= optimize_link_incoherent_ht(sysinfo);
 268
 269         // fidvid change will issue one LDTSTOP and the HT change will be effective too
 270         if (needs_reset) {
 271                 print_info("ht reset -\n");
 272                 soft_reset_x(sysinfo->sbbusn, sysinfo->sbdn);
 273         }
 274 #endif
 275         allow_all_aps_stop(bsp_apicid);
 276
 277         //It's the time to set ctrl in sysinfo now;
 278         fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
 279
 280         enable_smbus();
 281
 282 #if 0
 283         int i;
 284         for(i=0;i<4;i++) {
 285                 activate_spd_rom(&cpu[i]);
 286                 dump_smbus_registers();
 287         }
 288 #endif
 289
 290 #if 0
 291         for(i=1;i<256;i<<=1) {
 292                 change_i2c_mux(i);
 293                 dump_smbus_registers();
 294         }
 295 #endif
 296
 297         memreset_setup();
 298
 299         //do we need apci timer, tsc...., only debug need it for better output
 300         /* all ap stopped? */
 301 //        init_timer(); // Need to use TMICT to synconize FID/VID
 302
 303         sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
 304
 305 #if 0
 306         print_pci_devices();
 307 #endif
 308
 309 #if 0
 310 //        dump_pci_devices();
 311         dump_pci_device_index_wait(PCI_DEV(0, 0x18, 2), 0x98);
 312         dump_pci_device_index_wait(PCI_DEV(0, 0x19, 2), 0x98);
 313 #endif
 314
 315         post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now
 316
 317 }
 318