Remove duplicate file, adjust Makefile to use the original copy.
[coreboot.git] / src / mainboard / amd / serengeti_cheetah / Makefile.inc
1 ##
2 ## This file is part of the coreboot project.
3 ## 
4 ## Copyright (C) 2007-2008 coresystems GmbH
5 ##
6 ## This program is free software; you can redistribute it and/or
7 ## modify it under the terms of the GNU General Public License as
8 ## published by the Free Software Foundation; version 2 of
9 ## the License.
10 ##
11 ## This program is distributed in the hope that it will be useful,
12 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
13 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14 ## GNU General Public License for more details.
15 ##
16 ## You should have received a copy of the GNU General Public License
17 ## along with this program; if not, write to the Free Software
18 ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
19 ## MA 02110-1301 USA
20 ##
21
22 ##
23 ## This mainboard requires DCACHE_AS_RAM enabled. It won't work without.
24 ## 
25
26 driver-y +=  mainboard.o
27
28 #needed by irq_tables and mptable and acpi_tables
29 obj-y += get_bus_conf.o
30 obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o
31 obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o
32 obj-$(CONFIG_HAVE_ACPI_TABLES) +=  dsdt.o
33 obj-$(CONFIG_HAVE_ACPI_TABLES) +=  acpi_tables.o
34 obj-$(CONFIG_HAVE_ACPI_TABLES) +=  fadt.o
35
36 #./ssdt.o is in northbridge/amd/amdk8/Config.lb
37 obj-$(CONFIG_ACPI_SSDTX_NUM) +=  ssdt2.o
38 obj-$(CONFIG_ACPI_SSDTX_NUM) +=  ssdt3.o
39 obj-$(CONFIG_HAVE_ACPI_TABLES) +=  ssdt4.o
40 driver-y += ../../../drivers/i2c/i2cmux/i2cmux.o
41
42 # This is part of the conversion to init-obj and away from included code. 
43
44 initobj-y += crt0.o
45 # FIXME in $(top)/Makefile
46 crt0-y += ../../../../src/cpu/x86/16bit/entry16.inc
47 crt0-y += ../../../../src/cpu/x86/32bit/entry32.inc
48 crt0-y += ../../../../src/cpu/x86/16bit/reset16.inc
49 crt0-y += ../../../../src/arch/i386/lib/id.inc
50 crt0-y += ../../../../src/cpu/amd/car/cache_as_ram.inc
51 crt0-y += auto.inc
52
53 ldscript-y += ../../../../src/arch/i386/init/ldscript_fallback_cbfs.lb
54 ldscript-y += ../../../../src/cpu/x86/16bit/entry16.lds
55 ldscript-y += ../../../../src/cpu/x86/16bit/reset16.lds
56 ldscript-y += ../../../../src/arch/i386/lib/id.lds
57 ldscript-y += ../../../../src/arch/i386/lib/failover.lds
58
59 ifdef POST_EVALUATION
60
61 MAINBOARD_OPTIONS=\
62         -DCONFIG_AP_IN_SIPI_WAIT=0 \
63         -DCONFIG_USE_PRINTK_IN_CAR=1 \
64         -DCONFIG_HAVE_HIGH_TABLES=1
65
66 $(obj)/dsdt.c: $(src)/mainboard/$(MAINBOARDDIR)/dsdt.asl
67         iasl -p dsdt -tc $(src)/mainboard/$(MAINBOARDDIR)/dsdt.asl
68         mv dsdt.hex $@
69
70 $(obj)/mainboard/$(MAINBOARDDIR)/dsdt.o: $(obj)/dsdt.c
71         $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c $< -o $@
72
73 $(obj)/ssdt2.c: $(src)/mainboard/$(MAINBOARDDIR)/dx/pci2.asl
74         iasl -p $(CURDIR)/pci2 -tc $(CONFIG_MAINBOARD)/dx/pci2.asl
75         perl -pi -e 's/AmlCode/AmlCode_ssdt2/g' pci2.hex
76         mv pci2.hex ssdt2.c
77
78 $(obj)/ssdt3.c: $(src)/mainboard/$(MAINBOARDDIR)/dx/pci3.asl"
79         iasl -p $(CURDIR)/pci3 -tc $(CONFIG_MAINBOARD)/
80         perl -pi -e 's/AmlCode/AmlCode_ssdt3/g' pci3.hex
81         mv pci3.hex ssdt3.c
82            
83 $(obj)/ssdt4.c: $(src)/mainboard/$(MAINBOARDDIR)/dx/pci4.asl"
84         iasl -p $(CURDIR)/pci4 -tc $(CONFIG_MAINBOARD)/dx/pci4.asl
85         perl -pi -e 's/AmlCode/AmlCode_ssdt4/g' pci4.hex
86         mv pci4.hex ssdt4.c
87
88 $(obj)/mainboard/$(MAINBOARDDIR)/auto.inc: $(src)/mainboard/$(MAINBOARDDIR)/cache_as_ram_auto.c $(obj)/option_table.h
89         $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c -S  $(src)/mainboard/$(MAINBOARDDIR)/cache_as_ram_auto.c -o $@
90         perl -e 's/\.rodata/.rom.data/g' -pi $@
91         perl -e 's/\.text/.section .rom.text/g' -pi $@
92
93 endif
94