2 * This file is part of the coreboot project.
4 * Copyright (C) 2008 Advanced Micro Devices, Inc.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; version 2 of the License.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
21 #define QRANK_DIMM_SUPPORT 1
22 #if CONFIG_LOGICAL_CPUS==1
23 #define SET_NB_CFG_54 1
31 #include <device/pci_def.h>
33 #include <device/pnp_def.h>
34 #include <arch/romcc_io.h>
35 #include <cpu/x86/lapic.h>
36 #include <pc80/mc146818rtc.h>
37 #include <console/console.h>
39 #include <cpu/amd/model_fxx_rev.h>
40 #include "northbridge/amd/amdk8/raminit.h"
41 #include "cpu/amd/model_fxx/apic_timer.c"
42 #include "lib/delay.c"
44 #include "cpu/x86/lapic/boot_cpu.c"
45 #include "northbridge/amd/amdk8/reset_test.c"
46 #include "superio/ite/it8712f/it8712f_early_serial.c"
49 #include "cpu/x86/mtrr/earlymtrr.c"
50 #include "cpu/x86/bist.h"
52 #include "northbridge/amd/amdk8/setup_resource_map.c"
54 #include "southbridge/amd/rs690/rs690_early_setup.c"
55 #include "southbridge/amd/sb600/sb600_early_setup.c"
56 #include "northbridge/amd/amdk8/debug.c" /* After sb600_early_setup.c! */
58 /* CAN'T BE REMOVED! memory bus reset hook for some broken amd k8 boards. */
59 static void memreset(int controllers, const struct mem_controller *ctrl)
63 /* called in raminit_f.c */
64 static inline void activate_spd_rom(const struct mem_controller *ctrl)
68 /*called in raminit_f.c */
69 static inline int spd_read_byte(u32 device, u32 address)
71 return smbus_read_byte(device, address);
74 #include "northbridge/amd/amdk8/amdk8.h"
75 #include "northbridge/amd/amdk8/incoherent_ht.c"
76 #include "northbridge/amd/amdk8/raminit_f.c"
77 #include "northbridge/amd/amdk8/coherent_ht.c"
78 #include "lib/generic_sdram.c"
79 #include "resourcemap.c"
81 #include "cpu/amd/dualcore/dualcore.c"
84 #include "cpu/amd/car/post_cache_as_ram.c"
86 #include "cpu/amd/model_fxx/init_cpus.c"
88 #include "cpu/amd/model_fxx/fidvid.c"
90 #include "northbridge/amd/amdk8/early_ht.c"
92 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
94 static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, };
98 struct cpuid_result cpuid1;
99 struct sys_info *sysinfo =
100 (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE -
101 CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
103 if (!cpu_init_detectedx && boot_cpu()) {
104 /* Nothing special needs to be done to find bus 0 */
105 /* Allow the HT devices to be found */
106 enumerate_ht_chain();
109 /* sb600_pci_port80(); */
113 bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
119 /* Pistachio used a FPGA to enable serial debug instead of a SIO
120 * and it doesn't require any special setup. */
124 sb600_enable_usbdebug(0);
125 early_usbdebug_init();
132 /* Halt if there was a built in self test failure */
133 report_bist_failure(bist);
134 printk(BIOS_DEBUG, "bsp_apicid=0x%x\n", bsp_apicid);
136 setup_pistachio_resource_map();
138 setup_coherent_ht_domain();
140 #if CONFIG_LOGICAL_CPUS==1
141 /* It is said that we should start core1 after all core0 launched */
142 wait_all_core0_started();
145 wait_all_aps_started(bsp_apicid);
147 /* it will set up chains and store link pair for optimization later,
148 * it will init sblnk and sbbusn, nodes, sbdn */
149 ht_setup_chains_x(sysinfo);
151 /* run _early_setup before soft-reset. */
157 /* Check to see if processor is capable of changing FIDVID */
158 /* otherwise it will throw a GP# when reading FIDVID_STATUS */
159 cpuid1 = cpuid(0x80000007);
160 if( (cpuid1.edx & 0x6) == 0x6 ) {
162 /* Read FIDVID_STATUS */
163 msr=rdmsr(0xc0010042);
164 printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
167 enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
168 init_fidvid_bsp(bsp_apicid);
170 /* show final fid and vid */
171 msr=rdmsr(0xc0010042);
172 printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
175 printk(BIOS_DEBUG, "Changing FIDVID not supported\n");
180 needs_reset = optimize_link_coherent_ht();
181 needs_reset |= optimize_link_incoherent_ht(sysinfo);
183 printk(BIOS_DEBUG, "needs_reset=0x%x\n", needs_reset);
188 print_info("ht reset -\n");
192 allow_all_aps_stop(bsp_apicid);
194 /* It's the time to set ctrl now; */
195 printk(BIOS_DEBUG, "sysinfo->nodes: %2x sysinfo->ctrl: %p spd_addr: %p\n",
196 sysinfo->nodes, sysinfo->ctrl, spd_addr);
197 fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
201 sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
205 rs690_before_pci_init();
206 sb600_before_pci_init();