Add CONFIG_VGA_ROM_RUN to dbm690t and pistachio, otherwise the

[coreboot.git] / src / mainboard / amd / pistachio / devicetree.cb

#Define gpp_configuration,      A=0, B=1, C=2, D=3, E=4(default)
#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7)
#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3,
#                       1: the system allows a PCIE link to be established on Dev2 or Dev3.
#Define gfx_dual_slot, 0: single slot, 1: dual slot
#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable
#Define gfx_tmds, 0: didn't support TMDS, 1: support
#Define gfx_compliance, 0: didn't support compliance, 1: support
#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration
#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16
chip northbridge/amd/amdk8/root_complex
        device apic_cluster 0 on
                chip cpu/amd/socket_AM2
                device apic 0 on end
                end
        end
        device pci_domain 0 on
                chip northbridge/amd/amdk8
                        device pci 18.0 on #  southbridge, K8 HT Configuration
                                chip southbridge/amd/rs690
                                        device pci 0.0 on end # HT      0x7910
                                #       device pci 0.1 off end # CLK
                                        device pci 1.0 on  # Internal Graphics P2P bridge 0x7912
                                                chip drivers/pci/onboard
                                                        device pci 5.0 on end   # Internal Graphics 0x791F
                                                        register "rom_address" = "0xfff00000"
                                                end
                                        end
                                        device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913
                                        device pci 3.0 off end # PCIE P2P bridge        0x791b
                                        device pci 4.0 on end # PCIE P2P bridge 0x7914
                                        device pci 5.0 on end # PCIE P2P bridge 0x7915
                                        device pci 6.0 on end # PCIE P2P bridge 0x7916
                                        device pci 7.0 on end # PCIE P2P bridge 0x7917
                                        device pci 8.0 off end # NB/SB Link P2P bridge
                                        register "gpp_configuration" = "4"
                                        register "port_enable" = "0xfc"
                                        register "gfx_dev2_dev3" = "1"
                                        register "gfx_dual_slot" = "0"
                                        register "gfx_lane_reversal" = "0"
                                        register "gfx_tmds" = "0"
                                        register "gfx_compliance" = "0"
                                        register "gfx_reconfiguration" = "1"
                                        register "gfx_link_width" = "0"
                                end
                                chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus
                                        device pci 12.0 on end # SATA  0x4380
                                        device pci 13.0 on end # USB   0x4387
                                        device pci 13.1 on end # USB   0x4388
                                        device pci 13.2 on end # USB   0x4389
                                        device pci 13.3 on end # USB   0x438a
                                        device pci 13.4 on end # USB   0x438b
                                        device pci 13.5 on end # USB 2 0x4386
                                        device pci 14.0 on # SM        0x4385
                                                chip drivers/generic/generic #dimm 0-0-0
                                                        device i2c 50 on end
                                                end
                                                chip drivers/generic/generic #dimm 0-0-1
                                                        device i2c 51 off end
                                                end
                                                chip drivers/generic/generic #dimm 0-1-0
                                                        device i2c 52 off end
                                                end
                                                chip drivers/generic/generic #dimm 0-1-1
                                                        device i2c 53 off end
                                                end
                                        end # SM
                                device pci 14.1 on end # IDE    0x438c
                                device pci 14.2 on end # HDA    0x4383
                                device pci 14.3 on end # LPC    0x438d
                                device pci 14.4 on end # PCI 0x4384
                                device pci 14.5 on end # ACI 0x4382
                                device pci 14.6 on end # MCI 0x438e
                                        register "ide0_enable" = "1"
                                        register "sata0_enable" = "1"
                                        register "hda_viddid" = "0x10ec0882"
                                end     #southbridge/amd/sb600
                        end #  device pci 18.0

                        device pci 18.1 on end          # K8 Address Map
                        device pci 18.2 on end          # K8 DRAM Controller and HT Trace Mode
                        device pci 18.3 on end          # K8 Miscellaneous Control
                end             #northbridge/amd/amdk8
        end #pci_domain
end             #northbridge/amd/amdk8/root_complex