libpayload: Provide interpretation of CMOS data structures
[coreboot.git] / payloads / libpayload / drivers / nvram.c
1 /*
2  * This file is part of the libpayload project.
3  *
4  * Copyright (C) 2008 Uwe Hermann <uwe@hermann-uwe.de>
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions
8  * are met:
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  * 3. The name of the author may not be used to endorse or promote products
15  *    derived from this software without specific prior written permission.
16  *
17  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
21  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27  * SUCH DAMAGE.
28  */
29
30 /*
31  * Datasheet:
32  *  - Name: MC146818: Real-time Clock Plus RAM (RTC)
33  *  - PDF: http://www.freescale.com/files/microcontrollers/doc/data_sheet/MC146818.pdf
34  *  - Order number: MC146818/D
35  */
36
37 /*
38  * See also:
39  * http://bochs.sourceforge.net/techspec/CMOS-reference.txt
40  * http://www.bioscentral.com/misc/cmosmap.htm
41  */
42 #include <libpayload-config.h>
43 #include <libpayload.h>
44
45
46 /**
47  * PCs can have either 64 (very old ones), 128, or 256 bytes of CMOS RAM.
48  *
49  * Usually you access the lower 128 CMOS bytes via I/O port 0x70/0x71.
50  * For more recent chipsets with 256 bytes, you have to access the upper
51  * 128 bytes (128-255) using two different registers, usually 0x72/0x73.
52  *
53  * On some chipsets this can be different, though. The VIA VT8237R for example
54  * only recognizes the ports 0x74/0x75 for accessing the high 128 CMOS bytes
55  * (as seems to be the case for multiple VIA chipsets).
56  *
57  * It's very chipset-specific if and how the upper 128 bytes are enabled at
58  * all, but this work should be done in coreboot anyway. Libpayload assumes
59  * that coreboot has properly enabled access to the upper 128 bytes and
60  * doesn't try to do this on its own.
61  */
62 #define RTC_PORT_STANDARD      0x70
63 #ifdef CONFIG_RTC_PORT_EXTENDED_VIA
64 #define RTC_PORT_EXTENDED      0x74
65 #else
66 #define RTC_PORT_EXTENDED      0x72
67 #endif
68
69 /**
70  * Read a byte from the specified NVRAM address.
71  *
72  * @param addr The NVRAM address to read a byte from.
73  * @return The byte at the given NVRAM address.
74  */
75 u8 nvram_read(u8 addr)
76 {
77         u16 rtc_port = addr < 128 ? RTC_PORT_STANDARD : RTC_PORT_EXTENDED;
78
79         outb(addr, rtc_port);
80         return inb(rtc_port + 1);
81 }
82
83 /**
84  * Write a byte to the specified NVRAM address.
85  *
86  * @param val The byte to write to NVRAM.
87  * @param addr The NVRAM address to write to.
88  */
89 void nvram_write(u8 val, u8 addr)
90 {
91         u16 rtc_port = addr < 128 ? RTC_PORT_STANDARD : RTC_PORT_EXTENDED;
92
93         outb(addr, rtc_port);
94         outb(val, rtc_port + 1);
95 }
96
97 /**
98  * Return 1 if the NVRAM is currently updating and a 0 otherwise
99  * @return A 1 if the NVRAM is updating and 0 otherwise
100  */
101
102 int nvram_updating(void)
103 {
104        return (nvram_read(NVRAM_RTC_FREQ_SELECT) & NVRAM_RTC_UIP) ? 1 : 0;
105 }
106
107 /**
108  * Get the current time and date from the RTC
109  *
110  * @param time A pointer to a broken-down time structure
111  */
112 void rtc_read_clock(struct tm *time)
113 {
114         memset(time, 0, sizeof(*time));
115
116         while(nvram_updating());
117
118         time->tm_mon = bcd2dec(nvram_read(NVRAM_RTC_MONTH)) - 1;
119         time->tm_sec = bcd2dec(nvram_read(NVRAM_RTC_SECONDS));
120         time->tm_min = bcd2dec(nvram_read(NVRAM_RTC_MINUTES));
121         time->tm_mday = bcd2dec(nvram_read(NVRAM_RTC_DAY));
122         time->tm_hour = bcd2dec(nvram_read(NVRAM_RTC_HOURS));
123
124         /* Instead of finding the century register,
125            we just make an assumption that if the year value is
126            less then 80, then it is 2000+
127         */
128
129         time->tm_year = bcd2dec(nvram_read(NVRAM_RTC_YEAR));
130
131         if (time->tm_year < 80)
132                 time->tm_year += 100;
133 }
134
135