3 .\" (C) 2003 Ximian, Inc.
4 .\" (C) 2004-2005 Novell, Inc.
6 .\" Miguel de Icaza (miguel@gnu.org)
8 .de Sp \" Vertical space (when we can't use .PP)
14 mono \- Mono's ECMA-CLI native code generator (Just-in-Time and Ahead-of-Time)
17 .B mono [options] file [arguments...]
19 \fImono\fP is a runtime implementation of the ECMA Common Language
20 Infrastructure. This can be used to run ECMA and .NET applications.
22 The runtime contains a native code generator that transforms the
23 Common Intermediate Language into native code.
25 The code generator can operate in two modes: just in time compilation
26 (JIT) or ahead of time compilation (AOT). Since code can be
27 dynamically loaded, the runtime environment and the JIT are always
28 present, even if code is compiled ahead of time.
30 The runtime loads the specified
37 is an ECMA assembly. They typically have a .exe or .dll extension.
39 The runtime provides a number of configuration options for running
40 applications, for developing and debugging, and for testing and
41 debugging the runtime itself.
43 On Unix-based systems, Mono provides a mechanism to emulate the
44 Windows-style file access, this includes providing a case insensitive
45 view of the file system, directory separator mapping (from \\ to /) and
46 stripping the drive letters.
48 This functionality is enabled by setting the
50 environment variable to one of
55 See the description for
57 in the environment variables section for more details.
59 The following options are available:
62 This option is used to precompile the CIL code in the specified
63 assembly to native code. The generated code is stored in a file with
64 the extension .so. This file will be automatically picked up by the
65 runtime when the assembly is executed.
67 Ahead-of-Time compilation is most useful if you use it in combination
68 with the -O=all,-shared flag which enables all of the optimizations in
69 the code generator to be performed. Some of those optimizations are
70 not practical for Just-in-Time compilation since they might be very
73 Unlike the .NET Framework, Ahead-of-Time compilation will not generate
74 domain independent code: it generates the same code that the
75 Just-in-Time compiler would produce. Since most applications use a
76 single domain, this is fine. If you want to optimize the generated
77 code for use in multi-domain applications, consider using the
80 This pre-compiles the methods, but the original assembly is still
81 required to execute as this one contains the metadata and exception
82 information which is not available on the generated file. When
83 precompiling code, you might want to compile with all optimizations
84 (-O=all). Pre-compiled code is position independent code.
86 Pre compilation is just a mechanism to reduce startup time, increase
87 code sharing across multiple mono processes and avoid just-in-time
88 compilation program startup costs. The original assembly must still
89 be present, as the metadata is contained there.
91 AOT code typically can not be moved from one computer to another
92 (CPU-specific optimizations that are detected at runtime) so you
93 should not try to move the pre-generated assemblies or package the
94 pre-generated assemblies for deployment.
96 For more information about AOT, see: http://www.mono-project.com/AOT
98 .I "--config filename"
99 Load the specified configuration file instead of the default one(s).
100 The default files are /etc/mono/config and ~/.mono/config or the file
101 specified in the MONO_CONFIG environment variable, if set. See the
102 mono-config(5) man page for details on the format of this file.
105 Configures the virtual machine to be better suited for desktop
106 applications. Currently this sets the GC system to avoid expanding
107 the heap as much as possible at the expense of slowing down garbage
111 Displays usage instructions.
113 .I "--optimize=MODE", "-O=MODE"
114 MODE is a comma separated list of optimizations. They also allow
115 optimizations to be turned off by prefixing the optimization name with
118 In general, Mono has been tuned to use the default set of flags,
119 before using these flags for a deployment setting, you might want to
120 actually measure the benefits of using them.
122 The following optimizations are implemented:
124 all Turn on all optimizations
125 peephole Peephole postpass
126 branch Branch optimizations
127 inline Inline method calls
128 cfold Constant folding
129 consprop Constant propagation
130 copyprop Copy propagation
131 deadce Dead code elimination
132 linears Linear scan global reg allocation
133 cmov Conditional moves [arch-dependency]
134 shared Emit per-domain code
135 sched Instruction scheduling
136 intrins Intrinsic method implementations
137 tailc Tail recursion and tail calls
138 loop Loop related optimizations
139 fcmov Fast x86 FP compares [arch-dependency]
140 leaf Leaf procedures optimizations
141 aot Usage of Ahead Of Time compiled code
142 precomp Precompile all methods before executing Main
143 abcrem Array bound checks removal
144 ssapre SSA based Partial Redundancy Elimination
145 sse2 SSE2 instructions on x86 [arch-dependency]
148 For example, to enable all the optimization but dead code
149 elimination and inlining, you can use:
151 -O=all,-deadce,-inline
154 The flags that are flagged with [arch-dependency] indicate that the
155 given option if used in combination with Ahead of Time compilation
156 (--aot flag) would produce pre-compiled code that will depend on the
157 current CPU and might not be safely moved to another computer.
159 .I "--runtime=VERSION"
160 Mono supports different runtime versions. The version used depends on the program
161 that is being run or on its configuration file (named program.exe.config). This option
162 can be used to override such autodetection, by forcing a different runtime version
163 to be used. Note that this should only be used to select a later compatible runtime
164 version than the one the program was compiled against. A typical usage is for
165 running a 1.1 program on a 2.0 version:
167 mono --runtime=v2.0.50727 program.exe
170 .I "--security", "--security=mode"
171 Activate the security manager, a currently experimental feature in
172 Mono and it is OFF by default. The new code verifier can be enabled
173 with this option as well.
177 Using security without parameters is equivalent as calling it with the
180 The following modes are supported:
183 This allows mono to support declarative security attributes,
184 e.g. execution of Code Access Security (CAS) or non-CAS demands.
187 Enables the core-clr security system, typically used for
188 Moonlight/Silverlight applications. It provides a much simpler
189 security system than CAS, see http://www.mono-project.com/Moonlight
190 for more details and links to the descriptions of this new system.
193 Enables the new verifier and performs basic verification for code
194 validity. In this mode, unsafe code and P/Invoke are allowed. This
195 mode provides a better safety guarantee but it is still possible
196 for managed code to crash Mono.
199 Enables the new verifier and performs full verification of the code
200 being executed. It only allows verifiable code to be executed.
201 Unsafe code is not allowed but P/Invoke is. This mode should
202 not allow managed code to crash mono. The verification is not as
203 strict as ECMA 335 standard in order to stay compatible with the MS
209 Configures the virtual machine to be better suited for server
210 operations (currently, a no-op).
213 Prints JIT version information (system configuration, release number
214 and branch names if available).
217 .SH DEVELOPMENT OPTIONS
218 The following options are used to help when developing a JITed application.
220 .I "--debug", "--debug=OPTIONS"
221 Turns on the debugging mode in the runtime. If an assembly was
222 compiled with debugging information, it will produce line number
223 information for stack traces.
227 The optional OPTIONS argument is a comma separated list of debugging
228 options. These options are turned off by default since they generate
229 much larger and slower code at runtime.
231 The following options are supported:
234 Produces a detailed error when throwing a InvalidCastException.
237 Disable some JIT optimizations which are usually only disabled when
238 running inside the debugger. This can be helpful if you want to attach
239 to the running process with mdb.
243 .I "--profile[=profiler[:profiler_args]]"
244 Turns on profiling. For more information about profiling applications
245 and code coverage see the sections "PROFILING" and "CODE COVERAGE"
248 .I "--trace[=expression]"
249 Shows method names as they are invoked. By default all methods are
252 The trace can be customized to include or exclude methods, classes or
253 assemblies. A trace expression is a comma separated list of targets,
254 each target can be prefixed with a minus sign to turn off a particular
255 target. The words `program', `all' and `disabled' have special
256 meaning. `program' refers to the main program being executed, and
257 `all' means all the method calls.
259 The `disabled' option is used to start up with tracing disabled. It
260 can be enabled at a later point in time in the program by sending the
261 SIGUSR2 signal to the runtime.
263 Assemblies are specified by their name, for example, to trace all
264 calls in the System assembly, use:
267 mono --trace=System app.exe
270 Classes are specified with the T: prefix. For example, to trace all
271 calls to the System.String class, use:
274 mono --trace=T:System.String app.exe
277 And individual methods are referenced with the M: prefix, and the
278 standard method notation:
281 mono --trace=M:System.Console:WriteLine app.exe
284 As previously noted, various rules can be specified at once:
287 mono --trace=T:System.String,T:System.Random app.exe
290 You can exclude pieces, the next example traces calls to
291 System.String except for the System.String:Concat method.
294 mono --trace=T:System.String,-M:System.String:Concat
297 Finally, namespaces can be specified using the N: prefix:
300 mono --trace=N:System.Xml
303 .SH JIT MAINTAINER OPTIONS
304 The maintainer options are only used by those developing the runtime
305 itself, and not typically of interest to runtime users or developers.
308 Inserts a breakpoint before the method whose name is `method'
309 (namespace.class:methodname). Use `Main' as method name to insert a
310 breakpoint on the application's main method.
313 Inserts a breakpoint on exceptions. This allows you to debug your
314 application with a native debugger when an exception is thrown.
317 This compiles a method (namespace.name:methodname), this is used for
318 testing the compiler performance or to examine the output of the code
322 Compiles all the methods in an assembly. This is used to test the
323 compiler performance or to examine the output of the code generator
325 .I "--graph=TYPE METHOD"
326 This generates a postscript file with a graph with the details about
327 the specified method (namespace.name:methodname). This requires `dot'
328 and ghostview to be installed (it expects Ghostview to be called
331 The following graphs are available:
333 cfg Control Flow Graph (CFG)
335 code CFG showing code
336 ssa CFG showing code after SSA translation
337 optcode CFG showing code after IR optimizations
340 Some graphs will only be available if certain optimizations are turned
344 Instruct the runtime on the number of times that the method specified
345 by --compile (or all the methods if --compileall is used) to be
346 compiled. This is used for testing the code generator performance.
349 Displays information about the work done by the runtime during the
350 execution of an application.
352 .I "--wapi=hps|semdel"
353 Perform maintenance of the process shared data.
355 semdel will delete the global semaphore.
357 hps will list the currently used handles.
360 Increases the verbosity level, each time it is listed, increases the
361 verbosity level to include more information (including, for example,
362 a disassembly of the native code produced, code selector info etc.).
364 The mono runtime includes a profiler that can be used to explore
365 various performance related problems in your application. The
366 profiler is activated by passing the --profile command line argument
367 to the Mono runtime, the format is:
370 --profile[=profiler[:profiler_args]]
373 Mono has a built-in profiler called 'default' (and is also the default
374 if no arguments are specified), but developers can write custom
375 profilers, see the section "CUSTOM PROFILERS" for more details.
379 is not specified, the default profiler is used.
383 is a profiler-specific string of options for the profiler itself.
385 The default profiler accepts the following options 'alloc' to profile
386 memory consumption by the application; 'time' to profile the time
387 spent on each routine; 'jit' to collect time spent JIT-compiling methods
388 and 'stat' to perform sample statistical profiling.
389 If no options are provided the default is 'alloc,time,jit'.
392 profile data is printed to stdout: to change this, use the 'file=filename'
393 option to output the data to filename.
398 mono --profile program.exe
402 That will run the program with the default profiler and will do time
403 and allocation profiling.
407 mono --profile=default:stat,alloc,file=prof.out program.exe
410 Will do sample statistical profiling and allocation profiling on
411 program.exe. The profile data is put in prof.out.
413 Note that the statistical profiler has a very low overhead and should
414 be the preferred profiler to use (for better output use the full path
415 to the mono binary when running and make sure you have installed the
416 addr2line utility that comes from the binutils package).
418 There are a number of external profilers that have been developed for
419 Mono, we will update this section to contain the profilers.
421 The heap Shot profiler can track all live objects, and references to
422 these objects, and includes a GUI tool, this is our recommended
424 To install you must download the profiler
427 svn co svn://svn.myrealbox.com/source/trunk/heap-shot
434 See the included documentation for details on using it.
436 The Live Type profiler shows at every GC iteration all of the live
437 objects of a given type. To install you must download the profiler
440 svn co svn://svn.myrealbox.com/source/trunk/heap-prof
447 To use the profiler, execute:
449 mono --profile=desc-heap program.exe
452 The output of this profiler looks like this:
454 Checkpoint at 102 for heap-resize
455 System.MonoType : 708
456 System.Threading.Thread : 352
458 System.String[] : 104
459 Gnome.ModuleInfo : 112
460 System.Object[] : 160
461 System.Collections.Hashtable : 96
463 System.Collections.Hashtable+Slot[] : 296
464 System.Globalization.CultureInfo : 108
465 System.Globalization.NumberFormatInfo : 144
468 The first line describes the iteration number for the GC, in this case
471 Then on each line the type is displayed as well as the number of bytes
472 that are being consumed by live instances of this object.
474 The AOT profiler is used to feed back information to the AOT compiler
475 about how to order code based on the access patterns for pages. To
478 mono --profile=aot program.exe
480 The output of this profile can be fed back into Mono's AOT compiler to
481 order the functions on the disk to produce precompiled images that
482 have methods in sequential pages.
486 will eventually replace the default one. It is a
487 "general purpose" profiler, which can report method execution time,
488 allocations, jit time, and can also work in statistical mode. You invoke
491 mono --profile=logging program.exe
493 Its main characteristic is that it does not print the profiling data
494 at the end of the program execution, and in fact it does not elaborate
495 the events at all; instead, it logs them into a file periodically
496 during the program execution. The file is binary, and encoded as packed
497 as possible, so to see the data you must use a decoder program, which
498 you can find in svn in the "Mono.Profiler" module.
500 Some examples: to use the statistical profiler:
502 mono --profile=logging:s program.exe
504 To profile method enter-exit and allocations:
506 mono --profile=logging:c,a program.exe
508 To profile method enter-exit and jit time, and write the data to "mydata.mprof":
510 mono --profile=logging:c,j,o=mydata.mprof program.exe
512 Then you would need to invoke the decoder on "mydata.mprof" to see the
515 In its current state, this profiler can also perform heap analysis (like
516 heap-shot), and the decoder is already able to read the data, however
517 the user interface for this feature has not yet been written (which means
518 that the data is not printed by the decoder).
520 More explanations are provided here: "http://www.mono-project.com/LoggingProfiler".
522 The whole set of options accepted by the logging profiler is the following:
525 (or "out" or "o", default "o=profiler-log.prof"): the name of the output file.
528 (or "j"): collect information about time spent jitting methods.
531 (or "alloc" or "a"): collect information about each allocation (object class
535 (or "calls" or "c"): measure the time spent inside each method call.
538 (or "stat" or "s"): do statistical profiling.
541 (or "free" or "f"): enable garbage collection profiling in its lightweight
542 form (at each collection, the list if unreachable objects is dumped, and
543 for each object the class and size is provided, which together with the
544 basic allocation information allows to compute the heap size broken down
548 (or "heap" or "h"): enable full heap profiling, in this case at each
549 collection a full heap snapshot is dumped to disk.
552 (or "gc-c" or "gcc", default none, file name required): the name of the
553 file that controls the heap snapshot dumps.
556 (or "gc-d" or "gcd", default "gcd=0"): the initial number of heap
557 snapshots to dump (if the control file is not used).
559 .I per-thread-buffer-size
560 (or "tbs", default "tbs=10000"): the number of events that a thread buffer
561 can hold, when it's full it is written to disk (the writing thread is the
562 one that filled its buffer).
564 .I statistical-thread-buffer-size
565 (or "sbs", default "sbs=10000"): the number of statistical samples that
566 are hold in memory before they are dumped to disk (the system does
567 double-buffering and the statistical samples are written by a helper
571 (or "wbs", default "wbs=1024"): size in bytes of the internal write
574 Mono provides a mechanism for loading other profiling modules which in
575 the form of shared libraries. These profiling modules can hook up to
576 various parts of the Mono runtime to gather information about the code
579 To use a third party profiler you must pass the name of the profiler
583 mono --profile=custom program.exe
587 In the above sample Mono will load the user defined profiler from the
588 shared library `mono-profiler-custom.so'. This profiler module must
589 be on your dynamic linker library path.
591 A list of other third party profilers is available from Mono's web
592 site (www.mono-project.com/Performance_Tips)
594 Custom profiles are written as shared libraries. The shared library
595 must be called `mono-profiler-NAME.so' where `NAME' is the name of
598 For a sample of how to write your own custom profiler look in the
599 Mono source tree for in the samples/profiler.c.
601 Mono ships with a code coverage module. This module is activated by
602 using the Mono --profile=cov option. The format is:
603 .I "--profile=cov[:assembly-name[/namespace]] test-suite.exe"
605 By default code coverage will default to all the assemblies loaded,
606 you can limit this by specifying the assembly name, for example to
607 perform code coverage in the routines of your program use, for example
608 the following command line limits the code coverage to routines in the
612 mono --profile=cov:demo demo.exe
618 does not include the extension.
620 You can further restrict the code coverage output by specifying a
624 mono --profile=cov:demo/My.Utilities demo.exe
628 Which will only perform code coverage in the given assembly and
631 Typical output looks like this:
634 Not covered: Class:.ctor ()
635 Not covered: Class:A ()
636 Not covered: Driver:.ctor ()
637 Not covered: Driver:method ()
638 Partial coverage: Driver:Main ()
643 The offsets displayed are IL offsets.
645 A more powerful coverage tool is available in the module `monocov'.
646 See the monocov(1) man page for details.
648 It is possible to obtain a stack trace of all the active threads in
649 Mono by sending the QUIT signal to Mono, you can do this from the
650 command line, like this:
656 Where pid is the Process ID of the Mono process you want to examine.
657 The process will continue running afterwards, but its state is not
661 this is a last-resort mechanism for debugging applications and should
662 not be used to monitor or probe a production application. The
663 integrity of the runtime after sending this signal is not guaranteed
664 and the application might crash or terminate at any given point
667 You can use the MONO_LOG_LEVEL and MONO_LOG_MASK environment variables
668 to get verbose debugging output about the execution of your
669 application within Mono.
673 environment variable if set, the logging level is changed to the set
674 value. Possible values are "error", "critical", "warning", "message",
675 "info", "debug". The default value is "error". Messages with a logging
676 level greater then or equal to the log level will be printed to
679 Use "info" to track the dynamic loading of assemblies.
684 environment variable to limit the extent of the messages you get:
685 If set, the log mask is changed to the set value. Possible values are
686 "asm" (assembly loader), "type", "dll" (native library loader), "gc"
687 (garbage collector), "cfg" (config file loader), "aot" (precompiler) and "all".
688 The default value is "all". Changing the mask value allows you to display only
689 messages for a certain component. You can use multiple masks by comma
690 separating them. For example to see config file messages and assembly loader
691 messages set you mask to "asm,cfg".
693 The following is a common use to track down problems with P/Invoke:
696 $ MONO_LOG_LEVEL="debug" MONO_LOG_MASK="dll" mono glue.exe
701 Mono's XML serialization engine by default will use a reflection-based
702 approach to serialize which might be slow for continuous processing
703 (web service applications). The serialization engine will determine
704 when a class must use a hand-tuned serializer based on a few
705 parameters and if needed it will produce a customized C# serializer
706 for your types at runtime. This customized serializer then gets
707 dynamically loaded into your application.
709 You can control this with the MONO_XMLSERIALIZER_THS environment
712 The possible values are
714 to disable the use of a C# customized
715 serializer, or an integer that is the minimum number of uses before
716 the runtime will produce a custom serializer (0 will produce a
717 custom serializer on the first access, 50 will produce a serializer on
718 the 50th use). Mono will fallback to an interpreted serializer if the
719 serializer generation somehow fails. This behavior can be disabled
720 by setting the option
722 (for example: MONO_XMLSERIALIZER_THS=0,nofallback).
723 .SH ENVIRONMENT VARIABLES
726 Turns off the garbage collection in Mono. This should be only used
727 for debugging purposes
730 If set, this variable will instruct Mono to ahead-of-time compile new
731 assemblies on demand and store the result into a cache in
735 If set, this variable overrides the default system configuration directory
736 ($PREFIX/etc). It's used to locate machine.config file.
739 Sets the style of COM interop. If the value of this variable is "MS"
740 Mono will use string marhsalling routines from the liboleaut32 for the
741 BSTR type library, any other values will use the mono-builtin BSTR
745 If set, this variable overrides the default runtime configuration file
746 ($PREFIX/etc/mono/config). The --config command line options overrides the
747 environment variable.
750 If set, enables some features of the runtime useful for debugging.
751 This variable should contain a comma separated list of debugging options.
752 Currently, the following options are supported:
756 .I "collect-pagefault-stats"
757 Collects information about pagefaults. This is used internally to
758 track the number of page faults produced to load metadata. To display
759 this information you must use this option with "--stats" command line option.
762 Captures the interrupt signal (Control-C) and displays a stack trace
763 when pressed. Useful to find out where the program is executing at a
764 given point. This only displays the stack trace of a single thread.
767 This option will leak delegate trampolines that are no longer
768 referenced as to present the user with more information about a
769 delegate misuse. Basically a delegate instance might be created,
770 passed to unmanaged code, and no references kept in managed code,
771 which will garbage collect the code. With this option it is possible
772 to track down the source of the problems.
774 .I "break-on-unverified"
775 If this variable is set, when the Mono VM runs into a verification
776 problem, instead of throwing an exception it will break into the
777 debugger. This is useful when debugging verifier problems
781 .I "MONO_DISABLE_AIO"
782 If set, tells mono NOT to attempt using native asynchronous I/O services. In
783 that case, a default select/poll implementation is used. Currently only epoll()
786 .I "MONO_DISABLE_MANAGED_COLLATION"
787 If this environment variable is `yes', the runtime uses unmanaged
788 collation (which actually means no culture-sensitive collation). It
789 internally disables managed collation functionality invoked via the
790 members of System.Globalization.CompareInfo class. Collation is
794 For platforms that do not otherwise have a way of obtaining random bytes
795 this can be set to the name of a file system socket on which an egd or
796 prngd daemon is listening.
798 .I "MONO_EVENTLOG_TYPE"
799 Sets the type of event log provider to use (for System.Diagnostics.EventLog).
806 Persists event logs and entries to the local file system.
808 The directory in which to persist the event logs, event sources and entries
809 can be specified as part of the value.
811 If the path is not explicitly set, it defaults to "/var/lib/mono/eventlog"
812 on unix and "%APPDATA%\mono\eventlog" on Windows.
817 Uses the native win32 API to write events and registers event logs and
818 event sources in the registry. This is only available on Windows.
820 On Unix, the directory permission for individual event log and event source
821 directories is set to 777 (with +t bit) allowing everyone to read and write
822 event log entries while only allowing entries to be deleted by the user(s)
827 Silently discards any events.
830 The default is "null" on Unix (and versions of Windows before NT), and
831 "win32" on Windows NT (and higher).
834 .I "MONO_EXTERNAL_ENCODINGS"
835 If set, contains a colon-separated list of text encodings to try when
836 turning externally-generated text (e.g. command-line arguments or
837 filenames) into Unicode. The encoding names come from the list
838 provided by iconv, and the special case "default_locale" which refers
839 to the current locale's default encoding.
841 When reading externally-generated text strings UTF-8 is tried first,
842 and then this list is tried in order with the first successful
843 conversion ending the search. When writing external text (e.g. new
844 filenames or arguments to new processes) the first item in this list
845 is used, or UTF-8 if the environment variable is not set.
847 The problem with using MONO_EXTERNAL_ENCODINGS to process your
848 files is that it results in a problem: although its possible to get
849 the right file name it is not necessarily possible to open the file.
850 In general if you have problems with encodings in your filenames you
851 should use the "convmv" program.
854 Provides a prefix the runtime uses to look for Global Assembly Caches.
855 Directories are separated by the platform path separator (colons on
856 unix). MONO_GAC_PREFIX should point to the top directory of a prefixed
857 install. Or to the directory provided in the gacutil /gacdir command. Example:
858 .B /home/username/.mono:/usr/local/mono/
861 Enables some filename rewriting support to assist badly-written
862 applications that hard-code Windows paths. Set to a colon-separated
863 list of "drive" to strip drive letters, or "case" to do
864 case-insensitive file matching in every directory in a path. "all"
865 enables all rewriting methods. (Backslashes are always mapped to
866 slashes if this variable is set to a valid option.)
869 For example, this would work from the shell:
872 MONO_IOMAP=drive:case
876 If you are using mod_mono to host your web applications, you can use
879 directive, like this:
882 MonoSetEnv MONO_IOMAP=all
886 .I "MONO_MANAGED_WATCHER"
887 If set to "disabled", System.IO.FileSystemWatcher will use a file watcher
888 implementation which silently ignores all the watching requests.
889 If set to any other value, System.IO.FileSystemWatcher will use the default
890 managed implementation (slow). If unset, mono will try to use inotify, FAM,
891 Gamin, kevent under Unix systems and native API calls on Windows, falling
892 back to the managed implementation on error.
895 If set causes the mono process to be bound to a single processor. This may be
896 useful when debugging or working around race conditions.
899 Provides a search path to the runtime where to look for library
900 files. This is a tool convenient for debugging applications, but
901 should not be used by deployed applications as it breaks the assembly
902 loader in subtle ways.
904 Directories are separated by the platform path separator (colons on unix). Example:
905 .B /home/username/lib:/usr/local/mono/lib
907 Alternative solutions to MONO_PATH include: installing libraries into
908 the Global Assembly Cache (see gacutil(1)) or having the dependent
909 libraries side-by-side with the main executable.
911 For a complete description of recommended practices for application
913 http://www.mono-project.com/Guidelines:Application_Deployment page.
916 Experimental RTC support in the statistical profiler: if the user has
917 the permission, more accurate statistics are gathered. The MONO_RTC
918 value must be restricted to what the Linux rtc allows: power of two
919 from 64 to 8192 Hz. To enable higher frequencies like 4096 Hz, run as root:
922 echo 4096 > /proc/sys/dev/rtc/max-user-freq
929 MONO_RTC=4096 mono --profiler=default:stat program.exe
934 Disable inlining of thread local accesses. Try setting this if you get a segfault
935 early on in the execution of mono.
938 If set its the directory where the ".wapi" handle state is stored.
939 This is the directory where the Windows I/O Emulation layer stores its
940 shared state data (files, events, mutexes, pipes). By default Mono
941 will store the ".wapi" directory in the users's home directory.
943 .I "MONO_SHARED_HOSTNAME"
944 Uses the string value of this variable as a replacement for the host name when
945 creating file names in the ".wapi" directory. This helps if the host name of
946 your machine is likely to be changed when a mono application is running or if
947 you have a .wapi directory shared among several different computers.
949 Mono typically uses the hostname to create the files that are used to
950 share state across multiple Mono processes. This is done to support
951 home directories that might be shared over the network.
953 .I "MONO_STRICT_IO_EMULATION"
954 If set, extra checks are made during IO operations. Currently, this
955 includes only advisory locks around file writes.
957 .I "MONO_DISABLE_SHM"
958 If set, disables the shared memory files used for cross-process
959 handles: process have only private handles. This means that process
960 and thread handles are not available to other processes, and named
961 mutexes, named events and named semaphores are not visible between
964 This is can also be enabled by default by passing the
965 "--disable-shared-handles" option to configure.
968 The name of the theme to be used by Windows.Forms. Available themes today
969 include "clearlooks", "nice" and "win32".
971 The default is "win32".
973 .I "MONO_TLS_SESSION_CACHE_TIMEOUT"
974 The time, in seconds, that the SSL/TLS session cache will keep it's entry to
975 avoid a new negotiation between the client and a server. Negotiation are very
976 CPU intensive so an application-specific custom value may prove useful for
977 small embedded systems.
979 The default is 180 seconds.
981 .I "MONO_THREADS_PER_CPU"
982 The maximum number of threads in the general threadpool will be
983 20 + (MONO_THREADS_PER_CPU * number of CPUs). The default value for this
986 .I "MONO_XMLSERIALIZER_THS"
987 Controls the threshold for the XmlSerializer to produce a custom
988 serializer for a given class instead of using the Reflection-based
989 interpreter. The possible values are `no' to disable the use of a
990 custom serializer or a number to indicate when the XmlSerializer
991 should start serializing. The default value is 50, which means that
992 the a custom serializer will be produced on the 50th use.
994 .I "MONO_XMLSERIALIZER_DEBUG"
995 Set this value to 1 to prevent the serializer from removing the
996 temporary files that are created for fast serialization; This might
997 be useful when debugging.
999 .I "MONO_ASPNET_INHIBIT_SETTINGSMAP"
1000 Mono contains a feature which allows modifying settings in the .config files shipped
1001 with Mono by using config section mappers. The mappers and the mapping rules are
1002 defined in the $prefix/etc/mono/2.0/settings.map file and, optionally, in the
1003 settings.map file found in the top-level directory of your ASP.NET application.
1004 Both files are read by System.Web on application startup, if they are found at the
1005 above locations. If you don't want the mapping to be performed you can set this
1006 variable in your environment before starting the application and no action will
1008 .SH ENVIRONMENT VARIABLES FOR DEBUGGING
1010 .I "MONO_ASPNET_NODELETE"
1011 If set to any value, temporary source files generated by ASP.NET support
1012 classes will not be removed. They will be kept in the user's temporary
1016 The logging level, possible values are `error', `critical', `warning',
1017 `message', `info' and `debug'. See the DEBUGGING section for more
1021 Controls the domain of the Mono runtime that logging will apply to.
1022 If set, the log mask is changed to the set value. Possible values are
1023 "asm" (assembly loader), "type", "dll" (native library loader), "gc"
1024 (garbage collector), "cfg" (config file loader), "aot" (precompiler) and "all".
1025 The default value is "all". Changing the mask value allows you to display only
1026 messages for a certain component. You can use multiple masks by comma
1027 separating them. For example to see config file messages and assembly loader
1028 messages set you mask to "asm,cfg".
1031 Used for runtime tracing of method calls. The format of the comma separated
1040 disabled Trace output off upon start.
1043 You can toggle trace output on/off sending a SIGUSR2 signal to the program.
1045 .I "MONO_TRACE_LISTENER"
1046 If set, enables the System.Diagnostics.DefaultTraceListener, which will
1047 print the output of the System.Diagnostics Trace and Debug classes.
1048 It can be set to a filename, and to Console.Out or Console.Error to display
1049 output to standard output or standard error, respectively. If it's set to
1050 Console.Out or Console.Error you can append an optional prefix that will
1051 be used when writing messages like this: Console.Error:MyProgramName.
1052 See the System.Diagnostics.DefaultTraceListener documentation for more
1055 .I "MONO_XEXCEPTIONS"
1056 This throws an exception when a X11 error is encountered; by default a
1057 message is displayed but execution continues
1060 This is used in the System.Windows.Forms implementation when running
1061 with the X11 backend. This is used to debug problems in Windows.Forms
1062 as it forces all of the commands send to X11 server to be done
1063 synchronously. The default mode of operation is asynchronous which
1064 makes it hard to isolate the root of certain problems.
1066 .I "MONO_GENERIC_SHARING"
1067 This environment variable is completely unsupported, don't use it.
1068 This controls for which classes to enable generic code sharing in
1069 principle. Permissible values are "all", "corlib" and "none". The
1070 default is "corlib", meaning that sharing can only happen for corlib
1071 classes. Note that to enable generation of shared code the "gshared"
1072 compiler option has to be set as well.
1074 If you want to use Valgrind, you will find the file `mono.supp'
1075 useful, it contains the suppressions for the GC which trigger
1076 incorrect warnings. Use it like this:
1078 valgrind --suppressions=mono.supp mono ...
1081 On Unix assemblies are loaded from the installation lib directory. If you set
1082 `prefix' to /usr, the assemblies will be located in /usr/lib. On
1083 Windows, the assemblies are loaded from the directory where mono and
1086 .B ~/.mono/aot-cache
1088 The directory for the ahead-of-time compiler demand creation
1089 assemblies are located.
1091 .B /etc/mono/config, ~/.mono/config
1093 Mono runtime configuration file. See the mono-config(5) manual page
1094 for more information.
1096 .B ~/.config/.mono/certs, /usr/share/.mono/certs
1098 Contains Mono certificate stores for users / machine. See the certmgr(1)
1099 manual page for more information on managing certificate stores and
1100 the mozroots(1) page for information on how to import the Mozilla root
1101 certificates into the Mono certificate store.
1103 .B ~/.mono/assemblies/ASSEMBLY/ASSEMBLY.config
1105 Files in this directory allow a user to customize the configuration
1106 for a given system assembly, the format is the one described in the
1107 mono-config(5) page.
1109 .B ~/.config/.mono/keypairs, /usr/share/.mono/keypairs
1111 Contains Mono cryptographic keypairs for users / machine. They can be
1112 accessed by using a CspParameters object with DSACryptoServiceProvider
1113 and RSACryptoServiceProvider classes.
1115 .B ~/.config/.isolatedstorage, ~/.local/share/.isolatedstorage, /usr/share/.isolatedstorage
1117 Contains Mono isolated storage for non-roaming users, roaming users and
1118 local machine. Isolated storage can be accessed using the classes from
1119 the System.IO.IsolatedStorage namespace.
1121 .B <assembly>.config
1123 Configuration information for individual assemblies is loaded by the
1124 runtime from side-by-side files with the .config files, see the
1125 http://www.mono-project.com/Config for more information.
1127 .B Web.config, web.config
1129 ASP.NET applications are configured through these files, the
1130 configuration is done on a per-directory basis. For more information
1131 on this subject see the http://www.mono-project.com/Config_system.web
1134 Mailing lists are listed at the
1135 http://www.mono-project.com/Mailing_Lists
1137 http://www.mono-project.com
1140 certmgr(1), mcs(1), monocov(1), monodis(1), mono-config(5), mozroots(1), xsp(1).
1142 For more information on AOT:
1143 http://www.mono-project.com/AOT
1145 For ASP.NET-related documentation, see the xsp(1) manual page
projects / mono.git / blob