--- /dev/null
+# ===========================================================================
+# Kernel configuration targets
+# These targets are used from top-level makefile
+
+PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config \
+ localmodconfig localyesconfig
+
+ifdef KBUILD_KCONFIG
+Kconfig := $(KBUILD_KCONFIG)
+else
+Kconfig := Kconfig
+endif
+
+xconfig: $(obj)/qconf
+ $< $(Kconfig)
+
+gconfig: $(obj)/gconf
+ $< $(Kconfig)
+
+menuconfig: $(obj)/mconf
+ $< $(Kconfig)
+
+config: $(obj)/conf
+ $< --oldaskconfig $(Kconfig)
+
+nconfig: $(obj)/nconf
+ $< $(Kconfig)
+
+oldconfig: $(obj)/conf
+ $< --$@ $(Kconfig)
+
+silentoldconfig: $(obj)/conf
+ $(Q)mkdir -p include/generated
+ $< --$@ $(Kconfig)
+
+# if no path is given, then use src directory to find file
+ifdef LSMOD
+LSMOD_F := $(LSMOD)
+ifeq ($(findstring /,$(LSMOD)),)
+ LSMOD_F := $(objtree)/$(LSMOD)
+endif
+endif
+
+localmodconfig: $(obj)/streamline_config.pl $(obj)/conf
+ $(Q)mkdir -p include/generated
+ $(Q)perl $< $(srctree) $(Kconfig) $(LSMOD_F) > .tmp.config
+ $(Q)if [ -f .config ]; then \
+ cmp -s .tmp.config .config || \
+ (mv -f .config .config.old.1; \
+ mv -f .tmp.config .config; \
+ $(obj)/conf --silentoldconfig $(Kconfig); \
+ mv -f .config.old.1 .config.old) \
+ else \
+ mv -f .tmp.config .config; \
+ $(obj)/conf --silentoldconfig $(Kconfig); \
+ fi
+ $(Q)rm -f .tmp.config
+
+localyesconfig: $(obj)/streamline_config.pl $(obj)/conf
+ $(Q)mkdir -p include/generated
+ $(Q)perl $< $(srctree) $(Kconfig) $(LSMOD_F) > .tmp.config
+ $(Q)sed -i s/=m/=y/ .tmp.config
+ $(Q)if [ -f .config ]; then \
+ cmp -s .tmp.config .config || \
+ (mv -f .config .config.old.1; \
+ mv -f .tmp.config .config; \
+ $(obj)/conf --silentoldconfig $(Kconfig); \
+ mv -f .config.old.1 .config.old) \
+ else \
+ mv -f .tmp.config .config; \
+ $(obj)/conf --silentoldconfig $(Kconfig); \
+ fi
+ $(Q)rm -f .tmp.config
+
+# Create new linux.pot file
+# Adjust charset to UTF-8 in .po file to accept UTF-8 in Kconfig files
+# The symlink is used to repair a deficiency in arch/um
+update-po-config: $(obj)/kxgettext $(obj)/gconf.glade.h
+ $(Q)echo " GEN config"
+ $(Q)xgettext --default-domain=linux \
+ --add-comments --keyword=_ --keyword=N_ \
+ --from-code=UTF-8 \
+ --files-from=scripts/kconfig/POTFILES.in \
+ --output $(obj)/config.pot
+ $(Q)sed -i s/CHARSET/UTF-8/ $(obj)/config.pot
+ $(Q)ln -fs Kconfig.i386 arch/um/Kconfig.arch
+ $(Q)(for i in `ls arch/*/Kconfig`; \
+ do \
+ echo " GEN $$i"; \
+ $(obj)/kxgettext $$i \
+ >> $(obj)/config.pot; \
+ done )
+ $(Q)msguniq --sort-by-file --to-code=UTF-8 $(obj)/config.pot \
+ --output $(obj)/linux.pot
+ $(Q)rm -f arch/um/Kconfig.arch
+ $(Q)rm -f $(obj)/config.pot
+
+PHONY += allnoconfig allyesconfig allmodconfig alldefconfig randconfig
+
+allnoconfig allyesconfig allmodconfig alldefconfig randconfig: $(obj)/conf
+ $< --$@ $(Kconfig)
+
+PHONY += listnewconfig oldnoconfig savedefconfig defconfig
+
+listnewconfig oldnoconfig: $(obj)/conf
+ $< --$@ $(Kconfig)
+
+savedefconfig: $(obj)/conf
+ $< --$@=defconfig $(Kconfig)
+
+defconfig: $(obj)/conf
+ifeq ($(KBUILD_DEFCONFIG),)
+ $< --defconfig $(Kconfig)
+else
+ @echo "*** Default configuration is based on '$(KBUILD_DEFCONFIG)'"
+ $(Q)$< --defconfig=arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG) $(Kconfig)
+endif
+
+%_defconfig: $(obj)/conf
+ $(Q)$< --defconfig=arch/$(SRCARCH)/configs/$@ $(Kconfig)
+
+# Help text used by make help
+help:
+ @echo ' config - Update current config utilising a line-oriented program'
+ @echo ' nconfig - Update current config utilising a ncurses menu based program'
+ @echo ' menuconfig - Update current config utilising a menu based program'
+ @echo ' xconfig - Update current config utilising a QT based front-end'
+ @echo ' gconfig - Update current config utilising a GTK based front-end'
+ @echo ' oldconfig - Update current config utilising a provided .config as base'
+ @echo ' localmodconfig - Update current config disabling modules not loaded'
+ @echo ' localyesconfig - Update current config converting local mods to core'
+ @echo ' silentoldconfig - Same as oldconfig, but quietly, additionally update deps'
+ @echo ' defconfig - New config with default from ARCH supplied defconfig'
+ @echo ' savedefconfig - Save current config as ./defconfig (minimal config)'
+ @echo ' allnoconfig - New config where all options are answered with no'
+ @echo ' allyesconfig - New config where all options are accepted with yes'
+ @echo ' allmodconfig - New config selecting modules when possible'
+ @echo ' alldefconfig - New config with all symbols set to default'
+ @echo ' randconfig - New config with random answer to all options'
+ @echo ' listnewconfig - List new options'
+ @echo ' oldnoconfig - Same as silentoldconfig but set new symbols to n (unset)'
+
+# lxdialog stuff
+check-lxdialog := $(srctree)/$(src)/lxdialog/check-lxdialog.sh
+
+# Use recursively expanded variables so we do not call gcc unless
+# we really need to do so. (Do not call gcc as part of make mrproper)
+HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \
+ -DLOCALE
+
+# ===========================================================================
+# Shared Makefile for the various kconfig executables:
+# conf: Used for defconfig, oldconfig and related targets
+# nconf: Used for the nconfig target.
+# Utilizes ncurses
+# mconf: Used for the menuconfig target
+# Utilizes the lxdialog package
+# qconf: Used for the xconfig target
+# Based on QT which needs to be installed to compile it
+# gconf: Used for the gconfig target
+# Based on GTK which needs to be installed to compile it
+# object files used by all kconfig flavours
+
+lxdialog := lxdialog/checklist.o lxdialog/util.o lxdialog/inputbox.o
+lxdialog += lxdialog/textbox.o lxdialog/yesno.o lxdialog/menubox.o
+
+conf-objs := conf.o zconf.tab.o
+mconf-objs := mconf.o zconf.tab.o $(lxdialog)
+nconf-objs := nconf.o zconf.tab.o nconf.gui.o
+kxgettext-objs := kxgettext.o zconf.tab.o
+
+hostprogs-y := conf qconf gconf kxgettext
+
+ifeq ($(MAKECMDGOALS),nconfig)
+ hostprogs-y += nconf
+endif
+
+ifeq ($(MAKECMDGOALS),menuconfig)
+ hostprogs-y += mconf
+endif
+
+ifeq ($(MAKECMDGOALS),xconfig)
+ qconf-target := 1
+endif
+ifeq ($(MAKECMDGOALS),gconfig)
+ gconf-target := 1
+endif
+
+
+ifeq ($(qconf-target),1)
+qconf-cxxobjs := qconf.o
+qconf-objs := kconfig_load.o zconf.tab.o
+endif
+
+ifeq ($(gconf-target),1)
+gconf-objs := gconf.o kconfig_load.o zconf.tab.o
+endif
+
+clean-files := lkc_defs.h qconf.moc .tmp_qtcheck \
+ .tmp_gtkcheck zconf.tab.c lex.zconf.c zconf.hash.c gconf.glade.h
+clean-files += mconf qconf gconf nconf
+clean-files += config.pot linux.pot
+
+# Check that we have the required ncurses stuff installed for lxdialog (menuconfig)
+PHONY += $(obj)/dochecklxdialog
+$(addprefix $(obj)/,$(lxdialog)): $(obj)/dochecklxdialog
+$(obj)/dochecklxdialog:
+ $(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_EXTRACFLAGS) $(HOSTLOADLIBES_mconf)
+
+always := dochecklxdialog
+
+# Add environment specific flags
+HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(srctree)/$(src)/check.sh $(HOSTCC) $(HOSTCFLAGS))
+
+# generated files seem to need this to find local include files
+HOSTCFLAGS_lex.zconf.o := -I$(src)
+HOSTCFLAGS_zconf.tab.o := -I$(src)
+
+HOSTLOADLIBES_qconf = $(KC_QT_LIBS) -ldl
+HOSTCXXFLAGS_qconf.o = $(KC_QT_CFLAGS) -D LKC_DIRECT_LINK
+
+HOSTLOADLIBES_gconf = `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0` -ldl
+HOSTCFLAGS_gconf.o = `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \
+ -D LKC_DIRECT_LINK
+
+HOSTLOADLIBES_mconf = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))
+
+HOSTLOADLIBES_nconf = -lmenu -lpanel -lncurses
+$(obj)/qconf.o: $(obj)/.tmp_qtcheck
+
+ifeq ($(qconf-target),1)
+$(obj)/.tmp_qtcheck: $(src)/Makefile
+-include $(obj)/.tmp_qtcheck
+
+# QT needs some extra effort...
+$(obj)/.tmp_qtcheck:
+ @set -e; echo " CHECK qt"; dir=""; pkg=""; \
+ if ! pkg-config --exists QtCore 2> /dev/null; then \
+ echo "* Unable to find the QT4 tool qmake. Trying to use QT3"; \
+ pkg-config --exists qt 2> /dev/null && pkg=qt; \
+ pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \
+ if [ -n "$$pkg" ]; then \
+ cflags="\$$(shell pkg-config $$pkg --cflags)"; \
+ libs="\$$(shell pkg-config $$pkg --libs)"; \
+ moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \
+ dir="$$(pkg-config $$pkg --variable=prefix)"; \
+ else \
+ for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \
+ if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \
+ done; \
+ if [ -z "$$dir" ]; then \
+ echo "*"; \
+ echo "* Unable to find any QT installation. Please make sure that"; \
+ echo "* the QT4 or QT3 development package is correctly installed and"; \
+ echo "* either qmake can be found or install pkg-config or set"; \
+ echo "* the QTDIR environment variable to the correct location."; \
+ echo "*"; \
+ false; \
+ fi; \
+ libpath=$$dir/lib; lib=qt; osdir=""; \
+ $(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \
+ osdir=x$$($(HOSTCXX) -print-multi-os-directory); \
+ test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \
+ test -f $$libpath/libqt-mt.so && lib=qt-mt; \
+ cflags="-I$$dir/include"; \
+ libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \
+ moc="$$dir/bin/moc"; \
+ fi; \
+ if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \
+ echo "*"; \
+ echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \
+ echo "*"; \
+ moc="/usr/bin/moc"; \
+ fi; \
+ else \
+ cflags="\$$(shell pkg-config QtCore QtGui Qt3Support --cflags)"; \
+ libs="\$$(shell pkg-config QtCore QtGui Qt3Support --libs)"; \
+ binpath="\$$(shell pkg-config QtCore --variable=prefix)"; \
+ moc="$$binpath/bin/moc"; \
+ fi; \
+ echo "KC_QT_CFLAGS=$$cflags" > $@; \
+ echo "KC_QT_LIBS=$$libs" >> $@; \
+ echo "KC_QT_MOC=$$moc" >> $@
+endif
+
+$(obj)/gconf.o: $(obj)/.tmp_gtkcheck
+
+ifeq ($(gconf-target),1)
+-include $(obj)/.tmp_gtkcheck
+
+# GTK needs some extra effort, too...
+$(obj)/.tmp_gtkcheck:
+ @if `pkg-config --exists gtk+-2.0 gmodule-2.0 libglade-2.0`; then \
+ if `pkg-config --atleast-version=2.0.0 gtk+-2.0`; then \
+ touch $@; \
+ else \
+ echo "*"; \
+ echo "* GTK+ is present but version >= 2.0.0 is required."; \
+ echo "*"; \
+ false; \
+ fi \
+ else \
+ echo "*"; \
+ echo "* Unable to find the GTK+ installation. Please make sure that"; \
+ echo "* the GTK+ 2.0 development package is correctly installed..."; \
+ echo "* You need gtk+-2.0, glib-2.0 and libglade-2.0."; \
+ echo "*"; \
+ false; \
+ fi
+endif
+
+$(obj)/zconf.tab.o: $(obj)/lex.zconf.c $(obj)/zconf.hash.c
+
+$(obj)/kconfig_load.o: $(obj)/lkc_defs.h
+
+$(obj)/qconf.o: $(obj)/qconf.moc $(obj)/lkc_defs.h
+
+$(obj)/gconf.o: $(obj)/lkc_defs.h
+
+$(obj)/%.moc: $(src)/%.h
+ $(KC_QT_MOC) -i $< -o $@
+
+$(obj)/lkc_defs.h: $(src)/lkc_proto.h
+ sed < $< > $@ 's/P(\([^,]*\),.*/#define \1 (\*\1_p)/'
+
+# Extract gconf menu items for I18N support
+$(obj)/gconf.glade.h: $(obj)/gconf.glade
+ intltool-extract --type=gettext/glade $(obj)/gconf.glade
+
+###
+# The following requires flex/bison/gperf
+# By default we use the _shipped versions, uncomment the following line if
+# you are modifying the flex/bison src.
+# LKC_GENPARSER := 1
+
+ifdef LKC_GENPARSER
+
+$(obj)/zconf.tab.c: $(src)/zconf.y
+$(obj)/lex.zconf.c: $(src)/zconf.l
+$(obj)/zconf.hash.c: $(src)/zconf.gperf
+
+%.tab.c: %.y
+ bison -l -b $* -p $(notdir $*) $<
+ cp $@ $@_shipped
+
+lex.%.c: %.l
+ flex -L -P$(notdir $*) -o$@ $<
+ cp $@ $@_shipped
+
+%.hash.c: %.gperf
+ gperf < $< > $@
+ cp $@ $@_shipped
+
+endif
projects / seabios.git / blobdiff