--- /dev/null
+# This is the original manually generated Makefile. It may still be used
+# to build the collector.
+#
+# Primary targets:
+# gc.a - builds basic library
+# c++ - adds C++ interface to library
+# cords - adds cords (heavyweight strings) to library
+# test - prints porting information, then builds basic version of gc.a,
+# and runs some tests of collector and cords. Does not add cords or
+# c++ interface to gc.a
+# cord/de - builds dumb editor based on cords.
+ABI_FLAG=
+# ABI_FLAG should be the cc flag that specifies the ABI. On most
+# platforms this will be the empty string. Possible values:
+# +DD64 for 64-bit executable on HP/UX.
+# -n32, -n64, -o32 for SGI/MIPS ABIs.
+
+AS_ABI_FLAG=$(ABI_FLAG)
+# ABI flag for assembler. On HP/UX this is +A64 for 64 bit
+# executables.
+
+CC=cc $(ABI_FLAG)
+CXX=g++ $(ABI_FLAG)
+AS=as $(AS_ABI_FLAG)
+# The above doesn't work with gas, which doesn't run cpp.
+# Define AS as `gcc -c -x assembler-with-cpp' instead.
+
+# Redefining srcdir allows object code for the nonPCR version of the collector
+# to be generated in different directories.
+srcdir= .
+VPATH= $(srcdir)
+
+# Atomic_ops installation directory. If this doesn't exist, we create
+# it from the included libatomic_ops distribution.
+AO_SRC_DIR=$(srcdir)/libatomic_ops
+AO_INSTALL_DIR=$(srcdir)/libatomic_ops-install
+
+CFLAGS= -O -I$(srcdir)/include -I$(AO_INSTALL_DIR)/include -DATOMIC_UNCOLLECTABLE -DNO_EXECUTE_PERMISSION -DALL_INTERIOR_POINTERS
+
+# To build the parallel collector on Linux, add to the above:
+# -DGC_LINUX_THREADS -DPARALLEL_MARK -DTHREAD_LOCAL_ALLOC
+# To build the thread-capable preload library that intercepts
+# malloc, add -DGC_USE_DLOPEN_WRAP -DREDIRECT_MALLOC=GC_malloc -fpic
+# To build the parallel collector in a static library on HP/UX,
+# add to the above:
+# -DGC_HPUX_THREADS -DTHREAD_LOCAL_ALLOC -D_POSIX_C_SOURCE=199506L -mt
+# FIXME: PARALLEL_MARK currently broken on HP/UX.
+# To build the thread-safe collector on Tru64, add to the above:
+# -pthread -DGC_OSF1_THREADS
+
+# HOSTCC and HOSTCFLAGS are used to build executables that will be run as
+# part of the build process, i.e. on the build machine. These will usually
+# be the same as CC and CFLAGS, except in a cross-compilation environment.
+# Note that HOSTCFLAGS should include any -D flags that affect thread support.
+HOSTCC=$(CC)
+HOSTCFLAGS=$(CFLAGS)
+
+# For dynamic library builds, it may be necessary to add flags to generate
+# PIC code, e.g. -fPIC on Linux.
+
+# Setjmp_test may yield overly optimistic results when compiled
+# without optimization.
+
+# Look into doc/README.macros for the description of the "define arguments"
+# influencing the collector configuration.
+
+CXXFLAGS= $(CFLAGS)
+AR= ar
+RANLIB= ranlib
+
+
+OBJS= alloc.o reclaim.o allchblk.o misc.o mach_dep.o os_dep.o mark_rts.o \
+ headers.o mark.o obj_map.o blacklst.o finalize.o new_hblk.o dbg_mlc.o \
+ malloc.o stubborn.o checksums.o pthread_support.o pthread_stop_world.o \
+ darwin_stop_world.o typd_mlc.o ptr_chck.o mallocx.o gcj_mlc.o specific.o \
+ gc_dlopen.o backgraph.o win32_threads.o pthread_start.o thread_local_alloc.o
+
+CSRCS= reclaim.c allchblk.c misc.c alloc.c mach_dep.c os_dep.c mark_rts.c \
+ headers.c mark.c obj_map.c pcr_interface.c blacklst.c finalize.c \
+ new_hblk.c real_malloc.c dyn_load.c dbg_mlc.c malloc.c stubborn.c \
+ checksums.c pthread_support.c pthread_stop_world.c darwin_stop_world.c \
+ typd_mlc.c ptr_chck.c mallocx.c gcj_mlc.c specific.c gc_dlopen.c \
+ backgraph.c win32_threads.c pthread_start.c thread_local_alloc.c
+
+CORD_SRCS= cord/cordbscs.c cord/cordxtra.c cord/cordprnt.c cord/de.c cord/cordtest.c include/cord.h include/ec.h include/private/cord_pos.h cord/de_win.c cord/de_win.h cord/de_cmds.h cord/de_win.ICO cord/de_win.RC
+
+CORD_OBJS= cord/cordbscs.o cord/cordxtra.o cord/cordprnt.o
+
+SRCS= $(CSRCS) mips_sgi_mach_dep.s rs6000_mach_dep.s alpha_mach_dep.S \
+ sparc_mach_dep.S include/gc.h include/gc_typed.h include/gc_tiny_fl.h \
+ include/gc_version.h include/private/gc_hdrs.h include/private/gc_priv.h \
+ include/private/gcconfig.h include/private/gc_pmark.h \
+ include/gc_inline.h include/gc_mark.h extra/threadlibs.c \
+ extra/if_mach.c extra/if_not_there.c gc_cpp.cc include/gc_cpp.h \
+ extra/gcname.c include/weakpointer.h include/private/gc_locks.h \
+ mips_ultrix_mach_dep.s \
+ include/new_gc_alloc.h include/gc_allocator.h \
+ include/javaxfc.h sparc_sunos4_mach_dep.s sparc_netbsd_mach_dep.s \
+ include/gc_backptr.h include/gc_gcj.h include/private/dbg_mlc.h \
+ include/private/specific.h include/leak_detector.h \
+ include/gc_amiga_redirects.h \
+ include/gc_pthread_redirects.h ia64_save_regs_in_stack.s \
+ include/gc_config_macros.h include/private/pthread_support.h \
+ include/private/pthread_stop_world.h include/private/darwin_semaphore.h \
+ include/private/darwin_stop_world.h include/private/thread_local_alloc.h \
+ $(CORD_SRCS)
+
+DOC_FILES= README.QUICK doc/README.Mac doc/README.MacOSX doc/README.OS2 \
+ doc/README.amiga doc/README.cords doc/debugging.html \
+ doc/porting.html doc/overview.html \
+ doc/README.dj doc/README.hp doc/README.linux doc/README.rs6000 \
+ doc/README.sgi doc/README.solaris2 doc/README.uts \
+ doc/README.win32 doc/barrett_diagram doc/README \
+ doc/README.contributors doc/README.changes doc/gc.man \
+ doc/README.environment doc/tree.html doc/gcdescr.html \
+ doc/README.autoconf doc/README.macros doc/README.ews4800 \
+ doc/README.DGUX386 doc/README.arm.cross doc/leak.html \
+ doc/scale.html doc/gcinterface.html doc/README.darwin \
+ doc/simple_example.html doc/README.win64
+
+TESTS= tests/test.c tests/test_cpp.cc tests/trace_test.c \
+ tests/leak_test.c tests/thread_leak_test.c tests/middle.c \
+ tests/smash_test.c tests/huge_test.c
+
+GNU_BUILD_FILES= configure.ac Makefile.am configure \
+ install-sh configure.host Makefile.in \
+ aclocal.m4 config.sub config.guess \
+ include/include.am doc/doc.am \
+ ltmain.sh mkinstalldirs depcomp missing \
+ cord/cord.am tests/tests.am autogen.sh \
+ bdw-gc.pc.in compile
+
+OTHER_MAKEFILES= OS2_MAKEFILE NT_MAKEFILE gc.mak \
+ BCC_MAKEFILE EMX_MAKEFILE WCC_MAKEFILE Makefile.dj \
+ PCR-Makefile SMakefile.amiga Makefile.DLLs \
+ digimars.mak Makefile.direct NT_STATIC_THREADS_MAKEFILE \
+ NT_X64_STATIC_THREADS_MAKEFILE NT_X64_THREADS_MAKEFILE \
+ build_atomic_ops.sh build_atomic_ops.sh.cygwin
+
+OTHER_FILES= Makefile extra/setjmp_t.c callprocs \
+ MacProjects.sit.hqx extra/MacOS.c \
+ Mac_files/datastart.c Mac_files/dataend.c \
+ Mac_files/MacOS_config.h Mac_files/MacOS_Test_config.h \
+ extra/add_gc_prefix.c gc_cpp.cpp \
+ extra/AmigaOS.c extra/msvc_dbg.c include/private/msvc_dbg.h \
+ $(TESTS) $(GNU_BUILD_FILES) $(OTHER_MAKEFILES)
+
+CORD_INCLUDE_FILES= $(srcdir)/include/gc.h $(srcdir)/include/cord.h \
+ $(srcdir)/include/ec.h $(srcdir)/include/private/cord_pos.h
+
+UTILS= if_mach if_not_there threadlibs
+
+# Libraries needed for curses applications. Only needed for de.
+CURSES= -lcurses -ltermlib
+
+# The following is irrelevant on most systems. But a few
+# versions of make otherwise fork the shell specified in
+# the SHELL environment variable.
+SHELL= /bin/sh
+
+SPECIALCFLAGS = -I$(srcdir)/include -I$(AO_INSTALL_DIR)/include
+# Alternative flags to the C compiler for mach_dep.c.
+# Mach_dep.c often doesn't like optimization, and it's
+# not time-critical anyway.
+# Set SPECIALCFLAGS to -q nodirect_code on Encore.
+
+all: gc.a gctest
+
+# if AO_INSTALL_DIR doesn't exist, we assume that it is pointing to
+# the default location, and we need to build
+$(AO_INSTALL_DIR):
+ CC=$(CC) MAKE=$(MAKE) $(srcdir)/build_atomic_ops.sh
+
+LEAKFLAGS=$(CFLAGS) -DFIND_LEAK
+
+BSD-pkg-all: bsd-libgc.a bsd-libleak.a
+
+bsd-libgc.a:
+ $(MAKE) CFLAGS="$(CFLAGS)" clean c++-t
+ mv gc.a bsd-libgc.a
+
+bsd-libleak.a:
+ $(MAKE) -f Makefile.direct CFLAGS="$(LEAKFLAGS)" clean c++-nt
+ mv gc.a bsd-libleak.a
+
+BSD-pkg-install: BSD-pkg-all
+ ${CP} bsd-libgc.a libgc.a
+ ${INSTALL_DATA} libgc.a ${PREFIX}/lib
+ ${INSTALL_DATA} gc.h gc_cpp.h ${PREFIX}/include
+ ${INSTALL_MAN} doc/gc.man ${PREFIX}/man/man3/gc.3
+
+pcr: PCR-Makefile include/private/gc_private.h include/private/gc_hdrs.h \
+include/private/gc_locks.h include/gc.h include/private/gcconfig.h \
+mach_dep.o $(SRCS)
+ $(MAKE) -f PCR-Makefile depend
+ $(MAKE) -f PCR-Makefile
+
+$(OBJS) tests/test.o dyn_load.o dyn_load_sunos53.o: \
+ $(srcdir)/include/private/gc_priv.h \
+ $(srcdir)/include/private/gc_hdrs.h $(srcdir)/include/private/gc_locks.h \
+ $(srcdir)/include/gc.h $(srcdir)/include/gc_pthread_redirects.h \
+ $(srcdir)/include/private/gcconfig.h $(srcdir)/include/gc_typed.h \
+ $(srcdir)/include/gc_config_macros.h Makefile $(AO_INSTALL_DIR)
+# The dependency on Makefile is needed. Changing
+# options affects the size of GC_arrays,
+# invalidating all .o files that rely on gc_priv.h
+
+Makefile: Makefile.direct
+ cp Makefile.direct Makefile
+
+mark.o typd_mlc.o finalize.o ptr_chck.o: $(srcdir)/include/gc_mark.h \
+ $(srcdir)/include/private/gc_pmark.h
+
+specific.o pthread_support.o thread_local_alloc.o win32_threads.o: \
+ $(srcdir)/include/private/specific.h $(srcdir)/include/gc_inline.h \
+ $(srcdir)/include/private/thread_local_alloc.h
+
+dbg_mlc.o gcj_mlc.o: $(srcdir)/include/private/dbg_mlc.h
+
+tests/test.o: tests $(srcdir)/tests/test.c
+ $(CC) $(CFLAGS) -c $(srcdir)/tests/test.c
+ mv test.o tests/test.o
+
+tests:
+ mkdir tests
+
+base_lib gc.a: $(OBJS) dyn_load.o $(UTILS)
+ echo > base_lib
+ rm -f dont_ar_1
+ cp $(AO_INSTALL_DIR)/lib/libatomic_ops.a gc.a
+ ./if_mach SPARC SOLARIS touch dont_ar_1
+ ./if_mach SPARC SOLARIS $(AR) rus gc.a $(OBJS) dyn_load.o
+ ./if_mach M68K AMIGA touch dont_ar_1
+ ./if_mach M68K AMIGA $(AR) -vrus gc.a $(OBJS) dyn_load.o
+ ./if_not_there dont_ar_1 $(AR) ru gc.a $(OBJS) dyn_load.o
+ ./if_not_there dont_ar_1 $(RANLIB) gc.a || cat /dev/null
+# ignore ranlib failure; that usually means it doesn't exist, and isn't needed
+
+cords: $(CORD_OBJS) cord/cordtest $(UTILS)
+ rm -f dont_ar_3
+ ./if_mach SPARC SOLARIS touch dont_ar_3
+ ./if_mach SPARC SOLARIS $(AR) rus gc.a $(CORD_OBJS)
+ ./if_mach M68K AMIGA touch dont_ar_3
+ ./if_mach M68K AMIGA $(AR) -vrus gc.a $(CORD_OBJS)
+ ./if_not_there dont_ar_3 $(AR) ru gc.a $(CORD_OBJS)
+ ./if_not_there dont_ar_3 $(RANLIB) gc.a || cat /dev/null
+
+gc_cpp.o: $(srcdir)/gc_cpp.cc $(srcdir)/include/gc_cpp.h $(srcdir)/include/gc.h Makefile
+ $(CXX) -c $(CXXFLAGS) $(srcdir)/gc_cpp.cc
+
+test_cpp: $(srcdir)/tests/test_cpp.cc $(srcdir)/include/gc_cpp.h gc_cpp.o $(srcdir)/include/gc.h \
+base_lib $(UTILS)
+ rm -f test_cpp
+ ./if_mach HP_PA HPUX $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/tests/test_cpp.cc gc_cpp.o gc.a -ldld `./threadlibs`
+ ./if_not_there test_cpp $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/tests/test_cpp.cc gc_cpp.o gc.a `./threadlibs`
+
+c++-t: c++
+ ./test_cpp 1
+
+c++-nt: c++
+ @echo "Use ./test_cpp 1 to test the leak library"
+
+c++: gc_cpp.o $(srcdir)/include/gc_cpp.h test_cpp
+ rm -f dont_ar_4
+ ./if_mach SPARC SOLARIS touch dont_ar_4
+ ./if_mach SPARC SOLARIS $(AR) rus gc.a gc_cpp.o
+ ./if_mach M68K AMIGA touch dont_ar_4
+ ./if_mach M68K AMIGA $(AR) -vrus gc.a gc_cpp.o
+ ./if_not_there dont_ar_4 $(AR) ru gc.a gc_cpp.o
+ ./if_not_there dont_ar_4 $(RANLIB) gc.a || cat /dev/null
+ ./test_cpp 1
+ echo > c++
+
+dyn_load_sunos53.o: dyn_load.c
+ $(CC) $(CFLAGS) -DSUNOS53_SHARED_LIB -c $(srcdir)/dyn_load.c -o $@
+
+# SunOS5 shared library version of the collector
+sunos5gc.so: $(OBJS) dyn_load_sunos53.o
+ $(CC) -G -o sunos5gc.so $(OBJS) dyn_load_sunos53.o $(AO_INSTALL_DIR)/lib/libatomic_ops.a -ldl
+ ln sunos5gc.so libgc.so
+
+# Alpha/OSF shared library version of the collector
+libalphagc.so: $(OBJS)
+ ld -shared -o libalphagc.so $(OBJS) dyn_load.o -lc
+ ln libalphagc.so libgc.so
+
+# IRIX shared library version of the collector
+libirixgc.so: $(OBJS) dyn_load.o
+ ld -shared $(ABI_FLAG) -o libirixgc.so $(OBJS) dyn_load.o -lc
+ ln libirixgc.so libgc.so
+
+# Linux shared library version of the collector
+liblinuxgc.so: $(OBJS) dyn_load.o
+ gcc -shared -o liblinuxgc.so $(OBJS) dyn_load.o
+ ln liblinuxgc.so libgc.so
+
+# Build gctest with dynamic library
+dyn_test:
+ $(CC) $(CFLAGS) -o gctest tests/test.c libgc.so `./threadlibs`
+ ./gctest
+
+# Alternative Linux rule. This is preferable, but is likely to break the
+# Makefile for some non-linux platforms.
+# LIBOBJS= $(patsubst %.o, %.lo, $(OBJS))
+#
+#.SUFFIXES: .lo $(SUFFIXES)
+#
+#.c.lo:
+# $(CC) $(CFLAGS) $(CPPFLAGS) -fPIC -c $< -o $@
+#
+# liblinuxgc.so: $(LIBOBJS) dyn_load.lo
+# gcc -shared -Wl,-soname=libgc.so.0 -o libgc.so.0 $(LIBOBJS) dyn_load.lo
+# touch liblinuxgc.so
+
+mach_dep.o: $(srcdir)/mach_dep.c $(srcdir)/mips_sgi_mach_dep.s \
+ $(srcdir)/mips_ultrix_mach_dep.s \
+ $(srcdir)/rs6000_mach_dep.s \
+ $(srcdir)/sparc_mach_dep.S $(srcdir)/sparc_sunos4_mach_dep.s \
+ $(srcdir)/ia64_save_regs_in_stack.s \
+ $(srcdir)/sparc_netbsd_mach_dep.s $(UTILS)
+ rm -f mach_dep.o
+ ./if_mach SPARC SOLARIS $(CC) -c -o mach_dep2.o $(srcdir)/sparc_mach_dep.S
+ ./if_mach SPARC OPENBSD $(AS) -o mach_dep2.o $(srcdir)/sparc_sunos4_mach_dep.s
+ ./if_mach SPARC NETBSD $(AS) -o mach_dep2.o $(srcdir)/sparc_netbsd_mach_dep.s
+ ./if_mach SPARC "" $(CC) -c -o mach_dep1.o $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
+ ./if_mach SPARC "" ld -r -o mach_dep.o mach_dep1.o mach_dep2.o
+ ./if_mach IA64 "" as $(AS_ABI_FLAG) -o ia64_save_regs_in_stack.o $(srcdir)/ia64_save_regs_in_stack.s
+ ./if_mach IA64 "" $(CC) -c -o mach_dep1.o $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
+ ./if_mach IA64 "" ld -r -o mach_dep.o mach_dep1.o ia64_save_regs_in_stack.o
+ ./if_not_there mach_dep.o $(CC) -c $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
+
+mark_rts.o: $(srcdir)/mark_rts.c $(UTILS)
+ rm -f mark_rts.o
+ -./if_mach ALPHA OSF1 $(CC) -c $(CFLAGS) -Wo,-notail $(srcdir)/mark_rts.c
+ ./if_not_there mark_rts.o $(CC) -c $(CFLAGS) $(srcdir)/mark_rts.c
+# Work-around for DEC optimizer tail recursion elimination bug.
+# The ALPHA-specific line should be removed if gcc is used.
+
+alloc.o: include/gc_version.h
+
+cord:
+ mkdir cord
+
+cord/cordbscs.o: cord $(srcdir)/cord/cordbscs.c $(CORD_INCLUDE_FILES)
+ $(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordbscs.c
+ mv cordbscs.o cord/cordbscs.o
+# not all compilers understand -o filename
+
+cord/cordxtra.o: cord $(srcdir)/cord/cordxtra.c $(CORD_INCLUDE_FILES)
+ $(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordxtra.c
+ mv cordxtra.o cord/cordxtra.o
+
+cord/cordprnt.o: cord $(srcdir)/cord/cordprnt.c $(CORD_INCLUDE_FILES)
+ $(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordprnt.c
+ mv cordprnt.o cord/cordprnt.o
+
+cord/cordtest: $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a $(UTILS)
+ rm -f cord/cordtest
+ ./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -lucb
+ ./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -ldld `./threadlibs`
+ ./if_mach M68K AMIGA $(CC) $(CFLAGS) -UGC_AMIGA_MAKINGLIB -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a `./threadlibs`
+ ./if_not_there cord/cordtest $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a `./threadlibs`
+
+cord/de: $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(UTILS)
+ rm -f cord/de
+ ./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -lucb `./threadlibs`
+ ./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -ldld `./threadlibs`
+ ./if_mach POWERPC AIX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses
+ ./if_mach POWERPC DARWIN $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a
+ ./if_mach I386 LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
+ ./if_mach ALPHA LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
+ ./if_mach IA64 LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
+ ./if_mach M68K AMIGA $(CC) $(CFLAGS) -UGC_AMIGA_MAKINGLIB -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses
+ ./if_not_there cord/de $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) `./threadlibs`
+
+if_mach: $(srcdir)/extra/if_mach.c $(srcdir)/include/private/gcconfig.h
+ $(HOSTCC) $(HOSTCFLAGS) -o if_mach $(srcdir)/extra/if_mach.c
+
+threadlibs: $(srcdir)/extra/threadlibs.c $(srcdir)/include/private/gcconfig.h Makefile
+ $(HOSTCC) $(HOSTCFLAGS) -o threadlibs $(srcdir)/extra/threadlibs.c
+
+if_not_there: $(srcdir)/extra/if_not_there.c
+ $(HOSTCC) $(HOSTCFLAGS) -o if_not_there $(srcdir)/extra/if_not_there.c
+
+clean:
+ rm -f gc.a *.o *.exe tests/*.o gctest gctest_dyn_link test_cpp \
+ setjmp_test mon.out gmon.out a.out core if_not_there if_mach \
+ base_lib c++ threadlibs $(CORD_OBJS) cord/cordtest cord/de
+ -rm -f *~
+
+gctest: tests/test.o gc.a $(UTILS)
+ rm -f gctest
+ ./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o gctest tests/test.o gc.a -lucb
+ ./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o gctest tests/test.o gc.a -ldld `./threadlibs`
+ ./if_mach M68K AMIGA $(CC) $(CFLAGS) -UGC_AMIGA_MAKINGLIB -o gctest tests/test.o gc.a `./threadlibs`
+ ./if_not_there gctest $(CC) $(CFLAGS) -o gctest tests/test.o gc.a `./threadlibs`
+
+# If an optimized setjmp_test generates a segmentation fault,
+# odds are your compiler is broken. Gctest may still work.
+# Try compiling setjmp_t.c unoptimized.
+setjmp_test: $(srcdir)/extra/setjmp_t.c $(srcdir)/include/gc.h $(UTILS) $(AO_INSTALL_DIR)
+ $(CC) $(CFLAGS) -o setjmp_test $(srcdir)/extra/setjmp_t.c
+
+test: KandRtest cord/cordtest
+ cord/cordtest
+
+# Those tests that work even with a K&R C compiler:
+KandRtest: setjmp_test gctest
+ ./setjmp_test
+ ./gctest
+
+add_gc_prefix: $(srcdir)/extra/add_gc_prefix.c $(srcdir)/include/gc_version.h
+ $(CC) -o add_gc_prefix $(srcdir)/extra/add_gc_prefix.c
+
+gcname: $(srcdir)/extra/gcname.c $(srcdir)/include/gc_version.h
+ $(CC) -o gcname $(srcdir)/extra/gcname.c
+
+#We assume this is being done from source directory.
+dist gc.tar: $(SRCS) $(DOC_FILES) $(OTHER_FILES) add_gc_prefix gcname
+ cp Makefile Makefile.old
+ cp Makefile.direct Makefile
+ cd $(AO_SRC_DIR); $(MAKE) dist
+ if test $(srcdir)/libatomic_ops = $(AO_SRC_DIR); \
+ then \
+ mv $(AO_SRC_DIR) $(AO_SRC_DIR).bak ; \
+ tar xvfz $(AO_SRC_DIR).bak/libatomic_ops.tar.gz ; \
+ else \
+ tar xvfz $(AO_SRC_DIR)/libatomic_ops.tar.gz ; \
+ fi
+ rm -f `./gcname`
+ ln -s . `./gcname`
+ ./add_gc_prefix $(SRCS) $(DOC_FILES) $(OTHER_FILES) libatomic_ops > /tmp/gc.tar-files
+ tar cvfh gc.tar `cat /tmp/gc.tar-files`
+ cp gc.tar `./gcname`.tar
+ gzip `./gcname`.tar
+ rm `./gcname`
+
+gc.tar.Z: gc.tar
+ compress gc.tar
+
+gc.tar.gz: gc.tar
+ gzip gc.tar
+
+lint: $(CSRCS) tests/test.c
+ lint -DLINT $(CSRCS) tests/test.c | egrep -v "possible pointer alignment problem|abort|exit|sbrk|mprotect|syscall|change in ANSI|improper alignment"
+
+# BTL: added to test shared library version of collector.
+# Currently works only under SunOS5. Requires GC_INIT call from statically
+# loaded client code.
+ABSDIR = `pwd`
+gctest_dyn_link: tests/test.o libgc.so
+ $(CC) -L$(ABSDIR) -R$(ABSDIR) -o gctest_dyn_link tests/test.o -lgc -ldl -lthread
+
+gctest_irix_dyn_link: tests/test.o libirixgc.so
+ $(CC) -L$(ABSDIR) -o gctest_irix_dyn_link tests/test.o -lirixgc
+
+# The following appear to be dead, especially since libgc_globals.h
+# is apparently lost.
+test_dll.o: tests/test.c libgc_globals.h
+ $(CC) $(CFLAGS) -DGC_USE_DLL -c tests/test.c -o test_dll.o
+
+test_dll: test_dll.o libgc_dll.a libgc.dll
+ $(CC) test_dll.o -L$(ABSDIR) -lgc_dll -o test_dll
+
+SYM_PREFIX-libgc=GC
+
+# Uncomment the following line to build a GNU win32 DLL
+# include Makefile.DLLs
+
+reserved_namespace: $(SRCS)
+ for file in $(SRCS) tests/test.c tests/test_cpp.cc; do \
+ sed s/GC_/_GC_/g < $$file > tmp; \
+ cp tmp $$file; \
+ done
+
+user_namespace: $(SRCS)
+ for file in $(SRCS) tests/test.c tests/test_cpp.cc; do \
+ sed s/_GC_/GC_/g < $$file > tmp; \
+ cp tmp $$file; \
+ done
projects / hs-boehmgc.git / blobdiff