--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ * Copyright (C) 2008-2009 coresystems GmbH
+ * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <arch/io.h>
+#include <delay.h>
+#include "pch.h"
+
+#define HDA_ICII_REG 0x68
+#define HDA_ICII_BUSY (1 << 0)
+#define HDA_ICII_VALID (1 << 1)
+
+typedef struct southbridge_intel_bd82x6x_config config_t;
+
+static int set_bits(u32 port, u32 mask, u32 val)
+{
+ u32 reg32;
+ int count;
+
+ /* Write (val & mask) to port */
+ val &= mask;
+ reg32 = read32(port);
+ reg32 &= ~mask;
+ reg32 |= val;
+ write32(port, reg32);
+
+ /* Wait for readback of register to
+ * match what was just written to it
+ */
+ count = 50;
+ do {
+ /* Wait 1ms based on BKDG wait time */
+ mdelay(1);
+ reg32 = read32(port);
+ reg32 &= mask;
+ } while ((reg32 != val) && --count);
+
+ /* Timeout occurred */
+ if (!count)
+ return -1;
+ return 0;
+}
+
+static int codec_detect(u32 base)
+{
+ u8 reg8;
+
+ /* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */
+ if (set_bits(base + 0x08, 1, 1) == -1)
+ goto no_codec;
+
+ /* Write back the value once reset bit is set. */
+ write16(base + 0x0, read16(base + 0x0));
+
+ /* Read in Codec location (BAR + 0xe)[2..0]*/
+ reg8 = read8(base + 0xe);
+ reg8 &= 0x0f;
+ if (!reg8)
+ goto no_codec;
+
+ return reg8;
+
+no_codec:
+ /* Codec Not found */
+ /* Put HDA back in reset (BAR + 0x8) [0] */
+ set_bits(base + 0x08, 1, 0);
+ printk(BIOS_DEBUG, "Azalia: No codec!\n");
+ return 0;
+}
+
+const u32 * cim_verb_data = NULL;
+u32 cim_verb_data_size = 0;
+
+static u32 find_verb(struct device *dev, u32 viddid, const u32 ** verb)
+{
+ int idx=0;
+
+ while (idx < (cim_verb_data_size / sizeof(u32))) {
+ u32 verb_size = 4 * cim_verb_data[idx+2]; // in u32
+ if (cim_verb_data[idx] != viddid) {
+ idx += verb_size + 3; // skip verb + header
+ continue;
+ }
+ *verb = &cim_verb_data[idx+3];
+ return verb_size;
+ }
+
+ /* Not all codecs need to load another verb */
+ return 0;
+}
+
+/**
+ * Wait 50usec for the codec to indicate it is ready
+ * no response would imply that the codec is non-operative
+ */
+
+static int wait_for_ready(u32 base)
+{
+ /* Use a 50 usec timeout - the Linux kernel uses the
+ * same duration */
+
+ int timeout = 50;
+
+ while(timeout--) {
+ u32 reg32 = read32(base + HDA_ICII_REG);
+ if (!(reg32 & HDA_ICII_BUSY))
+ return 0;
+ udelay(1);
+ }
+
+ return -1;
+}
+
+/**
+ * Wait 50usec for the codec to indicate that it accepted
+ * the previous command. No response would imply that the code
+ * is non-operative
+ */
+
+static int wait_for_valid(u32 base)
+{
+ u32 reg32;
+
+ /* Send the verb to the codec */
+ reg32 = read32(base + HDA_ICII_REG);
+ reg32 |= HDA_ICII_BUSY | HDA_ICII_VALID;
+ write32(base + HDA_ICII_REG, reg32);
+
+ /* Use a 50 usec timeout - the Linux kernel uses the
+ * same duration */
+
+ int timeout = 50;
+ while(timeout--) {
+ reg32 = read32(base + HDA_ICII_REG);
+ if ((reg32 & (HDA_ICII_VALID | HDA_ICII_BUSY)) ==
+ HDA_ICII_VALID)
+ return 0;
+ udelay(1);
+ }
+
+ return -1;
+}
+
+static void codec_init(struct device *dev, u32 base, int addr)
+{
+ u32 reg32;
+ const u32 *verb;
+ u32 verb_size;
+ int i;
+
+ printk(BIOS_DEBUG, "Azalia: Initializing codec #%d\n", addr);
+
+ /* 1 */
+ if (wait_for_ready(base) == -1) {
+ printk(BIOS_DEBUG, " codec not ready.\n");
+ return;
+ }
+
+ reg32 = (addr << 28) | 0x000f0000;
+ write32(base + 0x60, reg32);
+
+ if (wait_for_valid(base) == -1) {
+ printk(BIOS_DEBUG, " codec not valid.\n");
+ return;
+ }
+
+ reg32 = read32(base + 0x64);
+
+ /* 2 */
+ printk(BIOS_DEBUG, "Azalia: codec viddid: %08x\n", reg32);
+ verb_size = find_verb(dev, reg32, &verb);
+
+ if (!verb_size) {
+ printk(BIOS_DEBUG, "Azalia: No verb!\n");
+ return;
+ }
+ printk(BIOS_DEBUG, "Azalia: verb_size: %d\n", verb_size);
+
+ /* 3 */
+ for (i = 0; i < verb_size; i++) {
+ if (wait_for_ready(base) == -1)
+ return;
+
+ write32(base + 0x60, verb[i]);
+
+ if (wait_for_valid(base) == -1)
+ return;
+ }
+ printk(BIOS_DEBUG, "Azalia: verb loaded.\n");
+}
+
+static void codecs_init(struct device *dev, u32 base, u32 codec_mask)
+{
+ int i;
+ for (i = 3; i >= 0; i--) {
+ if (codec_mask & (1 << i))
+ codec_init(dev, base, i);
+ }
+}
+
+static void azalia_init(struct device *dev)
+{
+ u32 base;
+ struct resource *res;
+ u32 codec_mask;
+ u8 reg8;
+ u16 reg16;
+ u32 reg32;
+
+ /* Find base address */
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ if (!res)
+ return;
+
+ // NOTE this will break as soon as the Azalia get's a bar above
+ // 4G. Is there anything we can do about it?
+ base = (u32)res->base;
+ printk(BIOS_DEBUG, "Azalia: base = %08x\n", (u32)base);
+
+ if (RCBA32(0x2030) & (1 << 31)) {
+ reg32 = pci_mmio_read_config32(dev, 0x120);
+ reg32 &= 0xf8ffff01;
+ reg32 |= (1 << 24); // 25 for server
+ reg32 |= RCBA32(0x2030) & 0xfe;
+ pci_mmio_write_config32(dev, 0x120, reg32);
+
+ reg16 = pci_mmio_read_config16(dev, 0x78);
+ reg16 &= ~(1 << 11);
+ pci_mmio_write_config16(dev, 0x78, reg16);
+ } else
+ printk(BIOS_DEBUG, "Azalia: V1CTL disabled.\n");
+
+ reg32 = pci_mmio_read_config32(dev, 0x114);
+ reg32 &= ~0xfe;
+ pci_mmio_write_config32(dev, 0x114, reg32);
+
+ // Set VCi enable bit
+ if (pci_mmio_read_config32(dev, 0x120) & ((1 << 24) |
+ (1 << 25) | (1 << 26))) {
+ reg32 = pci_mmio_read_config32(dev, 0x120);
+ reg32 |= (1 << 31);
+ pci_mmio_write_config32(dev, 0x120, reg32);
+ }
+
+ // Enable HDMI codec:
+ reg32 = pci_read_config32(dev, 0xc4);
+ reg32 |= (1 << 1);
+ pci_write_config32(dev, 0xc4, reg32);
+
+ reg8 = pci_read_config8(dev, 0x43);
+ reg8 |= (1 << 6);
+ pci_write_config8(dev, 0x43, reg8);
+
+ /* Additional programming steps */
+ reg32 = pci_read_config32(dev, 0xc4);
+ reg32 |= (1 << 13) | (1 << 10);
+ pci_write_config32(dev, 0xc4, reg32);
+
+ reg32 = pci_read_config32(dev, 0xd0);
+ reg32 &= ~(1 << 31);
+ pci_write_config32(dev, 0xd0, reg32);
+
+ /* Additional programming steps */
+ reg32 = pci_read_config32(dev, 0xc4);
+ reg32 |= (1 << 13);
+ pci_write_config32(dev, 0xc4, reg32);
+
+ reg32 = pci_read_config32(dev, 0xc4);
+ reg32 |= (1 << 10);
+ pci_write_config32(dev, 0xc4, reg32);
+
+ reg32 = pci_read_config32(dev, 0xd0);
+ reg32 &= ~(1 << 31);
+ pci_write_config32(dev, 0xd0, reg32);
+
+ /* Set Bus Master */
+ reg32 = pci_read_config32(dev, PCI_COMMAND);
+ pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER);
+
+ pci_write_config8(dev, 0x3c, 0x0a); // unused?
+
+ /* Codec Initialization Programming Sequence */
+ reg32 = read32(base + 0x08);
+ reg32 |= (1 << 0);
+ write32(base + 0x08, reg32);
+
+ //
+ reg8 = pci_read_config8(dev, 0x40); // Audio Control
+ reg8 |= 1; // Select Azalia mode. This needs to be controlled via devicetree.cb
+ pci_write_config8(dev, 0x40, reg8);
+
+ reg8 = pci_read_config8(dev, 0x4d); // Docking Status
+ reg8 &= ~(1 << 7); // Docking not supported
+ pci_write_config8(dev, 0x4d, reg8);
+
+ codec_mask = codec_detect(base);
+
+ if (codec_mask) {
+ printk(BIOS_DEBUG, "Azalia: codec_mask = %02x\n", codec_mask);
+ codecs_init(dev, base, codec_mask);
+ }
+
+ /* Enable dynamic clock gating */
+ reg8 = pci_read_config8(dev, 0x43);
+ reg8 &= ~0x7;
+ reg8 |= (1 << 2) | (1 << 0);
+ pci_write_config8(dev, 0x43, reg8);
+}
+
+static void azalia_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ if (!vendor || !device) {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ pci_read_config32(dev, PCI_VENDOR_ID));
+ } else {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+ }
+}
+
+static struct pci_operations azalia_pci_ops = {
+ .set_subsystem = azalia_set_subsystem,
+};
+
+static struct device_operations azalia_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = azalia_init,
+ .scan_bus = 0,
+ .ops_pci = &azalia_pci_ops,
+};
+
+static const struct pci_driver azalia_0 __pci_driver = {
+ .ops = &azalia_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1c20,
+};
+
+static const struct pci_driver azalia_1 __pci_driver = {
+ .ops = &azalia_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1e20,
+};
+
projects / coreboot.git / blobdiff