-##
+##
## This file is part of the coreboot project.
-##
+##
## Copyright (C) 2007 AMD
## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
-##
+##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
-##
+##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
-##
+##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
+##
##
## Compute the location and size of where this firmware image
## Compute the start location and size size of
## The coreboot bootloader.
##
-default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
+default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
##
end
end
-arch i386 end
+arch i386 end
##
## Build the objects we have code for in this directory.
#object reset.o
if HAVE_ACPI_TABLES
- object acpi_tables.o
- object fadt.o
+ object acpi_tables.o
+ object fadt.o
makerule dsdt.c
depends "$(MAINBOARD)/dx/dsdt_lb.dsl"
action "/usr/sbin/iasl -tc $(MAINBOARD)/dx/dsdt_lb.dsl"
action "mv dsdt_lb.hex dsdt.c"
end
- object ./dsdt.o
+ object ./dsdt.o
#./ssdt.o is moved to northbridge/amd/amdk8/Config.lb
-
- if ACPI_SSDTX_NUM
- makerule ssdt6.c
- depends "$(MAINBOARD)/dx/pci6.asl"
- action "/usr/sbin/iasl -tc $(MAINBOARD)/dx/pci6.asl"
- action "perl -pi -e 's/AmlCode/AmlCode_ssdt6/g' pci6.hex"
- action "mv pci6.hex ssdt6.c"
- end
- object ./ssdt6.o
- makerule ssdt5.c
- depends "$(MAINBOARD)/dx/pci5.asl"
- action "/usr/sbin/iasl -tc $(MAINBOARD)/dx/pci5.asl"
- action "perl -pi -e 's/AmlCode/AmlCode_ssdt5/g' pci5.hex"
- action "mv pci5.hex ssdt5.c"
- end
- object ./ssdt5.o
- end
+
+ if ACPI_SSDTX_NUM
+ makerule ssdt6.c
+ depends "$(MAINBOARD)/dx/pci6.asl"
+ action "/usr/sbin/iasl -tc $(MAINBOARD)/dx/pci6.asl"
+ action "perl -pi -e 's/AmlCode/AmlCode_ssdt6/g' pci6.hex"
+ action "mv pci6.hex ssdt6.c"
+ end
+ object ./ssdt6.o
+ makerule ssdt5.c
+ depends "$(MAINBOARD)/dx/pci5.asl"
+ action "/usr/sbin/iasl -tc $(MAINBOARD)/dx/pci5.asl"
+ action "perl -pi -e 's/AmlCode/AmlCode_ssdt5/g' pci5.hex"
+ action "mv pci5.hex ssdt5.c"
+ end
+ object ./ssdt5.o
+ end
end
if USE_DCACHE_RAM
- if CONFIG_USE_INIT
+ if CONFIG_USE_INIT
makerule ./cache_as_ram_auto.o
- depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
+ depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
+ action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
end
else
makerule ./cache_as_ram_auto.inc
- depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
- action "perl -e 's/.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/.text/.section .rom.text/g' -pi $@"
+ depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
+ action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
+ action "perl -e 's/.rodata/.rom.data/g' -pi $@"
+ action "perl -e 's/.text/.section .rom.text/g' -pi $@"
end
end
if USE_FAILOVER_IMAGE
else
if CONFIG_AP_CODE_IN_CAR
- makerule ./apc_auto.o
- depends "$(MAINBOARD)/apc_auto.c option_table.h"
- action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/apc_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
- end
- ldscript /arch/i386/init/ldscript_apc.lb
+ makerule ./apc_auto.o
+ depends "$(MAINBOARD)/apc_auto.c option_table.h"
+ action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/apc_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
+ end
+ ldscript /arch/i386/init/ldscript_apc.lb
end
end
mainboardinit cpu/x86/32bit/entry32.inc
if USE_DCACHE_RAM
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
+ if CONFIG_USE_INIT
+ ldscript /cpu/x86/32bit/entry32.lds
+ end
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
+ if CONFIG_USE_INIT
+ ldscript /cpu/amd/car/cache_as_ram.lds
+ end
end
## Build our reset vector (This is where coreboot is entered)
##
if HAVE_FAILOVER_BOOT
- if USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
+ if USE_FAILOVER_IMAGE
+ mainboardinit cpu/x86/16bit/reset16.inc
+ ldscript /cpu/x86/16bit/reset16.lds
else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
+ mainboardinit cpu/x86/32bit/reset32.inc
+ ldscript /cpu/x86/32bit/reset32.lds
end
else
- if USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
+ if USE_FALLBACK_IMAGE
+ mainboardinit cpu/x86/16bit/reset16.inc
+ ldscript /cpu/x86/16bit/reset16.lds
else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
+ mainboardinit cpu/x86/32bit/reset32.inc
+ ldscript /cpu/x86/32bit/reset32.lds
end
end
## ROMSTRAP table for MCP55
##
if HAVE_FAILOVER_BOOT
- if USE_FAILOVER_IMAGE
+ if USE_FAILOVER_IMAGE
mainboardinit southbridge/nvidia/mcp55/romstrap.inc
ldscript /southbridge/nvidia/mcp55/romstrap.lds
end
else
- if USE_FALLBACK_IMAGE
+ if USE_FALLBACK_IMAGE
mainboardinit southbridge/nvidia/mcp55/romstrap.inc
ldscript /southbridge/nvidia/mcp55/romstrap.lds
end
end
###
-### This is the early phase of coreboot startup
+### This is the early phase of coreboot startup
### Things are delicate and we test to see if we should
### failover to another image.
###
end
##
-## Include the secondary Configuration files
+## Include the secondary Configuration files
##
if CONFIG_CHIP_NAME
config chip.h
end
chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_F
- device apic 0 on end
- end
- end
+ device apic_cluster 0 on
+ chip cpu/amd/socket_F
+ device apic 0 on end
+ end
+ end
device pci_domain 0 on
chip northbridge/amd/amdk8 #mc0
- device pci 18.0 on
- # devices on link 0, link 0 == LDT 0
- chip southbridge/nvidia/mcp55
+ device pci 18.0 on
+ # devices on link 0, link 0 == LDT 0
+ chip southbridge/nvidia/mcp55
device pci 0.0 on end # HT
- device pci 1.0 on # LPC
+ device pci 1.0 on # LPC
chip superio/winbond/w83627ehg
device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
+ device pnp 2e.1 off # Parallel Port
+ io 0x60 = 0x378
+ irq 0x70 = 7
end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
+ device pnp 2e.2 on # Com1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
end
- device pnp 2e.3 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
+ device pnp 2e.3 off # Com2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
+ device pnp 2e.5 on # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
irq 0x72 = 12
end
- device pnp 2e.6 off # SFI
- io 0x62 = 0x100
+ device pnp 2e.6 off # SFI
+ io 0x62 = 0x100
end
- device pnp 2e.7 off # GPIO_GAME_MIDI
+ device pnp 2e.7 off # GPIO_GAME_MIDI
io 0x60 = 0x220
io 0x62 = 0x300
irq 0x70 = 9
- end
- device pnp 2e.8 off end # WDTO_PLED
- device pnp 2e.9 off end # GPIO_SUSLED
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
+ end
+ device pnp 2e.8 off end # WDTO_PLED
+ device pnp 2e.9 off end # GPIO_SUSLED
+ device pnp 2e.a off end # ACPI
+ device pnp 2e.b on # HW Monitor
io 0x60 = 0x290
irq 0x70 = 5
- end
+ end
end
end
- device pci 1.1 on # SM 0
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- chip drivers/generic/generic #dimm 1-0-0
- device i2c 54 on end
- end
- chip drivers/generic/generic #dimm 1-0-1
- device i2c 55 on end
- end
- chip drivers/generic/generic #dimm 1-1-0
- device i2c 56 on end
- end
- chip drivers/generic/generic #dimm 1-1-1
- device i2c 57 on end
- end
+ device pci 1.1 on # SM 0
+ chip drivers/generic/generic #dimm 0-0-0
+ device i2c 50 on end
+ end
+ chip drivers/generic/generic #dimm 0-0-1
+ device i2c 51 on end
+ end
+ chip drivers/generic/generic #dimm 0-1-0
+ device i2c 52 on end
+ end
+ chip drivers/generic/generic #dimm 0-1-1
+ device i2c 53 on end
+ end
+ chip drivers/generic/generic #dimm 1-0-0
+ device i2c 54 on end
+ end
+ chip drivers/generic/generic #dimm 1-0-1
+ device i2c 55 on end
+ end
+ chip drivers/generic/generic #dimm 1-1-0
+ device i2c 56 on end
+ end
+ chip drivers/generic/generic #dimm 1-1-1
+ device i2c 57 on end
+ end
end # SM
- device pci 1.1 on # SM 1
+ device pci 1.1 on # SM 1
#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus?
-# chip drivers/generic/generic #PCIXA Slot1
-# device i2c 50 on end
-# end
-# chip drivers/generic/generic #PCIXB Slot1
-# device i2c 51 on end
-# end
-# chip drivers/generic/generic #PCIXB Slot2
-# device i2c 52 on end
-# end
-# chip drivers/generic/generic #PCI Slot1
-# device i2c 53 on end
-# end
-# chip drivers/generic/generic #Master MCP55 PCI-E
-# device i2c 54 on end
-# end
-# chip drivers/generic/generic #Slave MCP55 PCI-E
-# device i2c 55 on end
-# end
- chip drivers/generic/generic #MAC EEPROM
- device i2c 51 on end
- end
-
- end # SM
- device pci 2.0 on end # USB 1.1
- device pci 2.1 on end # USB 2
- device pci 4.0 on end # IDE
- device pci 5.0 on end # SATA 0
- device pci 5.1 on end # SATA 1
- device pci 5.2 on end # SATA 2
- device pci 6.0 on end # PCI
- device pci 6.1 on end # AZA
- device pci 8.0 on end # NIC
- device pci 9.0 on end # NIC
- device pci a.0 on end # PCI E 5
- device pci b.0 off end # PCI E 4
- device pci c.0 off end # PCI E 3
- device pci d.0 on end # PCI E 2
- device pci e.0 off end # PCI E 1
- device pci f.0 on end # PCI E 0
- register "ide0_enable" = "1"
- register "sata0_enable" = "1"
- register "sata1_enable" = "1"
+# chip drivers/generic/generic #PCIXA Slot1
+# device i2c 50 on end
+# end
+# chip drivers/generic/generic #PCIXB Slot1
+# device i2c 51 on end
+# end
+# chip drivers/generic/generic #PCIXB Slot2
+# device i2c 52 on end
+# end
+# chip drivers/generic/generic #PCI Slot1
+# device i2c 53 on end
+# end
+# chip drivers/generic/generic #Master MCP55 PCI-E
+# device i2c 54 on end
+# end
+# chip drivers/generic/generic #Slave MCP55 PCI-E
+# device i2c 55 on end
+# end
+ chip drivers/generic/generic #MAC EEPROM
+ device i2c 51 on end
+ end
+
+ end # SM
+ device pci 2.0 on end # USB 1.1
+ device pci 2.1 on end # USB 2
+ device pci 4.0 on end # IDE
+ device pci 5.0 on end # SATA 0
+ device pci 5.1 on end # SATA 1
+ device pci 5.2 on end # SATA 2
+ device pci 6.0 on end # PCI
+ device pci 6.1 on end # AZA
+ device pci 8.0 on end # NIC
+ device pci 9.0 on end # NIC
+ device pci a.0 on end # PCI E 5
+ device pci b.0 off end # PCI E 4
+ device pci c.0 off end # PCI E 3
+ device pci d.0 on end # PCI E 2
+ device pci e.0 off end # PCI E 1
+ device pci f.0 on end # PCI E 0
+ register "ide0_enable" = "1"
+ register "sata0_enable" = "1"
+ register "sata1_enable" = "1"
register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1
register "mac_eeprom_addr" = "0x51"
end
- end # device pci 18.0
+ end # device pci 18.0
device pci 18.0 on end # Link 1
device pci 18.0 on
- # devices on link 2, link 2 == LDT 2
- chip southbridge/nvidia/mcp55
+ # devices on link 2, link 2 == LDT 2
+ chip southbridge/nvidia/mcp55
device pci 0.0 on end # HT
- device pci 1.0 on end # LPC
- device pci 1.1 on end # SM 0
- device pci 2.0 off end # USB 1.1
- device pci 2.1 off end # USB 2
- device pci 4.0 off end # IDE
- device pci 5.0 on end # SATA 0
- device pci 5.1 on end # SATA 1
- device pci 5.2 on end # SATA 2
- device pci 6.0 off end # PCI
- device pci 6.1 off end # AZA
- device pci 8.0 on end # NIC
- device pci 9.0 on end # NIC
- device pci a.0 on end # PCI E 5
- device pci b.0 off end # PCI E 4
- device pci c.0 off end # PCI E 3
- device pci d.0 on end # PCI E 2
- device pci e.0 on end # PCI E 1
- device pci f.0 on end # PCI E 0
- register "ide0_enable" = "1"
- register "sata0_enable" = "1"
- register "sata1_enable" = "1"
+ device pci 1.0 on end # LPC
+ device pci 1.1 on end # SM 0
+ device pci 2.0 off end # USB 1.1
+ device pci 2.1 off end # USB 2
+ device pci 4.0 off end # IDE
+ device pci 5.0 on end # SATA 0
+ device pci 5.1 on end # SATA 1
+ device pci 5.2 on end # SATA 2
+ device pci 6.0 off end # PCI
+ device pci 6.1 off end # AZA
+ device pci 8.0 on end # NIC
+ device pci 9.0 on end # NIC
+ device pci a.0 on end # PCI E 5
+ device pci b.0 off end # PCI E 4
+ device pci c.0 off end # PCI E 3
+ device pci d.0 on end # PCI E 2
+ device pci e.0 on end # PCI E 1
+ device pci f.0 on end # PCI E 0
+ register "ide0_enable" = "1"
+ register "sata0_enable" = "1"
+ register "sata1_enable" = "1"
register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1
register "mac_eeprom_addr" = "0x51"
- end
+ end
end # device pci 18.0
device pci 18.1 on end
device pci 18.2 on end
device pci 18.3 on end
end # mc0
-
+
end # PCI domain
-
-# chip drivers/generic/debug
-# device pnp 0.0 off end # chip name
-# device pnp 0.1 on end # pci_regs_all
-# device pnp 0.2 on end # mem
-# device pnp 0.3 off end # cpuid
-# device pnp 0.4 on end # smbus_regs_all
-# device pnp 0.5 off end # dual core msr
-# device pnp 0.6 off end # cache size
-# device pnp 0.7 off end # tsc
-# device pnp 0.8 off end # io
-# device pnp 0.9 off end # io
-# end
+
+# chip drivers/generic/debug
+# device pnp 0.0 off end # chip name
+# device pnp 0.1 on end # pci_regs_all
+# device pnp 0.2 on end # mem
+# device pnp 0.3 off end # cpuid
+# device pnp 0.4 on end # smbus_regs_all
+# device pnp 0.5 off end # dual core msr
+# device pnp 0.6 off end # cache size
+# device pnp 0.7 off end # tsc
+# device pnp 0.8 off end # io
+# device pnp 0.9 off end # io
+# end
end #root_complex
-##
+##
## This file is part of the coreboot project.
-##
+##
## Copyright (C) 2007 AMD
## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
-##
+##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
-##
+##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
-##
+##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
+##
uses HAVE_MP_TABLE
uses HAVE_PIRQ_TABLE
#CHIP_NAME ?
default CONFIG_CHIP_NAME=1
-#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead.
+#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead.
#2G
#default HW_MEM_HOLE_SIZEK=0x200000
#1G
###
### Defaults of options that you may want to override in the target config file
-###
+###
##
## The default compiler
##
## Disable the gdb stub by default
-##
+##
default CONFIG_GDB_STUB=0
##
##
### Select the coreboot loglevel
##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
+## EMERG 1 system is unusable
+## ALERT 2 action must be taken immediately
+## CRIT 3 critical conditions
+## ERR 4 error conditions
+## WARNING 5 warning conditions
+## NOTICE 6 normal but significant condition
+## INFO 7 informational
+## DEBUG 8 debug-level messages
+## SPEW 9 Way too many details
## Request this level of debugging output
default DEFAULT_CONSOLE_LOGLEVEL=8
#define RAMINIT_SYSINFO 1
#define CACHE_AS_RAM_ADDRESS_DEBUG 0
-#define SET_NB_CFG_54 1
+#define SET_NB_CFG_54 1
//used by raminit
#define QRANK_DIMM_SUPPORT 1
#include "pc80/serial.c"
#if CONFIG_USE_INIT == 0
- #include "lib/memcpy.c"
+ #include "lib/memcpy.c"
#endif
#include "arch/i386/lib/console.c"
-#if 0
+#if 0
static void post_code(uint8_t value) {
#if 1
- int i;
- for(i=0;i<0x80000;i++) {
- outb(value, 0x80);
- }
+ int i;
+ for(i=0;i<0x80000;i++) {
+ outb(value, 0x80);
+ }
#endif
}
#endif
void hardwaremain(int ret_addr)
{
struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); // in CACHE
- struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM
+ struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM
struct node_core_id id;
id = get_node_core_id_x();
//FIXME: for USBDEBUG_DIRECT you need to make sure dbg_info get assigned in AP
- print_debug("CODE IN CACHE ON NODE:"); print_debug_hex8(id.nodeid); print_debug("\r\n");
+ print_debug("CODE IN CACHE ON NODE:"); print_debug_hex8(id.nodeid); print_debug("\r\n");
train_ram(id.nodeid, sysinfo, sysinfox);
go back, but can not use stack any more, because we only keep ret_addr and can not restore esp, and ebp
*/
- __asm__ volatile (
- "movl %0, %%edi\n\t"
- "jmp *%%edi\n\t"
- :: "a"(ret_addr)
- );
+ __asm__ volatile (
+ "movl %0, %%edi\n\t"
+ "jmp *%%edi\n\t"
+ :: "a"(ret_addr)
+ );
}
struct eregs {
- uint32_t eax, ecx, edx, ebx, esp, ebp, esi, edi;
- uint32_t vector;
- uint32_t error_code;
- uint32_t eip;
- uint32_t cs;
- uint32_t eflags;
+ uint32_t eax, ecx, edx, ebx, esp, ebp, esi, edi;
+ uint32_t vector;
+ uint32_t error_code;
+ uint32_t eip;
+ uint32_t cs;
+ uint32_t eflags;
};
void x86_exception(struct eregs *info)
{
- do {
- hlt();
- } while(1);
+ do {
+ hlt();
+ } while(1);
}
#endif
#define DBGP_DEFAULT 7
-
+
#include <stdint.h>
#include <device/pci_def.h>
#include <device/pci_ids.h>
#include "cpu/x86/bist.h"
#if CONFIG_USE_INIT == 0
- #include "lib/memcpy.c"
+ #include "lib/memcpy.c"
#endif
#include "northbridge/amd/amdk8/debug.c"
#include "sdram/generic_sdram.c"
-#include "resourcemap.c"
+#include "resourcemap.c"
#include "cpu/amd/dualcore/dualcore.c"
#define MCP55_PCI_E_X_1 4
#define MCP55_MB_SETUP \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */
#include "southbridge/nvidia/mcp55/mcp55_early_setup_ss.h"
#include "southbridge/nvidia/mcp55/mcp55_early_setup_car.c"
static void sio_setup(void)
{
- unsigned value;
- uint32_t dword;
- uint8_t byte;
-
- byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b);
- byte |= 0x20;
- pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte);
-
- dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0);
- dword |= (1<<0);
- pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword);
-
- dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4);
- dword |= (1<<16);
- pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword);
+ unsigned value;
+ uint32_t dword;
+ uint8_t byte;
+
+ byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b);
+ byte |= 0x20;
+ pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte);
+
+ dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0);
+ dword |= (1<<0);
+ pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword);
+
+ dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4);
+ dword |= (1<<16);
+ pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword);
}
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- sio_setup();
-
- /* Setup the mcp55 */
- mcp55_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
+ unsigned last_boot_normal_x = last_boot_normal();
+
+ /* Is this a cpu only reset? or Is this a secondary cpu? */
+ if ((cpu_init_detectedx) || (!boot_cpu())) {
+ if (last_boot_normal_x) {
+ goto normal_image;
+ } else {
+ goto fallback_image;
+ }
+ }
+
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ sio_setup();
+
+ /* Setup the mcp55 */
+ mcp55_enable_rom();
+
+ /* Is this a deliberate reset by the bios */
+ if (bios_reset_detected() && last_boot_normal_x) {
+ goto normal_image;
+ }
+ /* This is the primary cpu how should I boot? */
+ else if (do_normal_boot()) {
+ goto normal_image;
+ }
+ else {
+ goto fallback_image;
+ }
normal_image:
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
- );
+ __asm__ volatile ("jmp __normal_image"
+ : /* outputs */
+ : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
+ );
fallback_image:
#if HAVE_FAILOVER_BOOT==1
- __asm__ volatile ("jmp __fallback_image"
- : /* outputs */
- : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
- )
+ __asm__ volatile ("jmp __fallback_image"
+ : /* outputs */
+ : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
+ )
#endif
;
}
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-#if HAVE_FAILOVER_BOOT==1
+#if HAVE_FAILOVER_BOOT==1
#if USE_FAILOVER_IMAGE==1
- failover_process(bist, cpu_init_detectedx);
+ failover_process(bist, cpu_init_detectedx);
#else
real_main(bist, cpu_init_detectedx);
#endif
#else
#if USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
+ failover_process(bist, cpu_init_detectedx);
#endif
real_main(bist, cpu_init_detectedx);
#endif
#endif
};
- struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE);
+ struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE);
- int needs_reset = 0;
- unsigned bsp_apicid = 0;
+ int needs_reset = 0;
+ unsigned bsp_apicid = 0;
- if (bist == 0) {
+ if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
+ }
pnp_enter_ext_func_mode(SERIAL_DEV);
- pnp_write_config(SERIAL_DEV, 0x24, 0);
+ pnp_write_config(SERIAL_DEV, 0x24, 0);
w83627ehg_enable_dev(SERIAL_DEV, TTYS0_BASE);
pnp_exit_ext_func_mode(SERIAL_DEV);
- setup_mb_resource_map();
+ setup_mb_resource_map();
+
+ uart_init();
- uart_init();
-
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
mcp55_enable_usbdebug_direct(DBGP_DEFAULT);
early_usbdebug_direct_init();
#endif
- console_init();
- print_debug("*sysinfo range: ["); print_debug_hex32(sysinfo); print_debug(","); print_debug_hex32((unsigned long)sysinfo+sizeof(struct sys_info)); print_debug(")\r\n");
+ console_init();
+ print_debug("*sysinfo range: ["); print_debug_hex32(sysinfo); print_debug(","); print_debug_hex32((unsigned long)sysinfo+sizeof(struct sys_info)); print_debug(")\r\n");
- print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\r\n");
+ print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\r\n");
#if MEM_TRAIN_SEQ == 1
- set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram
+ set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram
#endif
- setup_coherent_ht_domain(); // routing table and start other core0
+ setup_coherent_ht_domain(); // routing table and start other core0
- wait_all_core0_started();
+ wait_all_core0_started();
#if CONFIG_LOGICAL_CPUS==1
- // It is said that we should start core1 after all core0 launched
- /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain,
- * So here need to make sure last core0 is started, esp for two way system,
- * (there may be apic id conflicts in that case)
- */
- start_other_cores();
- wait_all_other_cores_started(bsp_apicid);
+ // It is said that we should start core1 after all core0 launched
+ /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain,
+ * So here need to make sure last core0 is started, esp for two way system,
+ * (there may be apic id conflicts in that case)
+ */
+ start_other_cores();
+ wait_all_other_cores_started(bsp_apicid);
#endif
- /* it will set up chains and store link pair for optimization later */
- ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
+ /* it will set up chains and store link pair for optimization later */
+ ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
#if K8_SET_FIDVID == 1
- {
- msr_t msr;
- msr=rdmsr(0xc0010042);
- print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n");
+ {
+ msr_t msr;
+ msr=rdmsr(0xc0010042);
+ print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n");
- }
+ }
- enable_fid_change();
+ enable_fid_change();
- enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
+ enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
- init_fidvid_bsp(bsp_apicid);
+ init_fidvid_bsp(bsp_apicid);
- // show final fid and vid
- {
- msr_t msr;
- msr=rdmsr(0xc0010042);
- print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n");
+ // show final fid and vid
+ {
+ msr_t msr;
+ msr=rdmsr(0xc0010042);
+ print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n");
- }
+ }
#endif
- needs_reset |= optimize_link_coherent_ht();
- needs_reset |= optimize_link_incoherent_ht(sysinfo);
- needs_reset |= mcp55_early_setup_x();
+ needs_reset |= optimize_link_coherent_ht();
+ needs_reset |= optimize_link_incoherent_ht(sysinfo);
+ needs_reset |= mcp55_early_setup_x();
- // fidvid change will issue one LDTSTOP and the HT change will be effective too
- if (needs_reset) {
- print_info("ht reset -\r\n");
- soft_reset();
- }
- allow_all_aps_stop(bsp_apicid);
+ // fidvid change will issue one LDTSTOP and the HT change will be effective too
+ if (needs_reset) {
+ print_info("ht reset -\r\n");
+ soft_reset();
+ }
+ allow_all_aps_stop(bsp_apicid);
- //It's the time to set ctrl in sysinfo now;
+ //It's the time to set ctrl in sysinfo now;
fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
- enable_smbus();
+ enable_smbus();
- memreset_setup();
+ memreset_setup();
- //do we need apci timer, tsc...., only debug need it for better output
- /* all ap stopped? */
-// init_timer(); // Need to use TMICT to synconize FID/VID
+ //do we need apci timer, tsc...., only debug need it for better output
+ /* all ap stopped? */
+// init_timer(); // Need to use TMICT to synconize FID/VID
- sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
+ sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
- post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now
+ post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now
}
-##
+##
## This file is part of the coreboot project.
-##
+##
## Copyright (C) 2007 AMD
## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
-##
+##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
-##
+##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
-##
+##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
+##
entries
395 1 e 1 hw_scrubber
396 1 e 1 interleave_chip_selects
397 2 e 8 max_mem_clock
-399 1 e 2 dual_core
+399 1 e 2 dual_core
400 1 e 1 power_on_after_fail
412 4 e 6 debug_level
416 4 e 7 boot_first
420 4 e 7 boot_second
424 4 e 7 boot_third
428 4 h 0 boot_index
-432 8 h 0 boot_countdown
+432 8 h 0 boot_countdown
440 4 e 9 slow_cpu
444 1 e 1 nmi
445 1 e 1 iommu
struct mb_sysconf_t mb_sysconf;
unsigned pci1234x[] =
-{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not
+{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not
//You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
- 0x0000ff0,
- 0x0000ff0,
- 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0
+ 0x0000ff0,
+ 0x0000ff0,
+ 0x0000ff0,
+// 0x0000ff0,
+// 0x0000ff0,
+// 0x0000ff0,
+// 0x0000ff0,
+// 0x0000ff0
};
unsigned hcdnx[] =
{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most
0x20202020,
0x20202020,
- 0x20202020,
-// 0x20202020,
-// 0x20202020,
-// 0x20202020,
-// 0x20202020,
-// 0x20202020,
+ 0x20202020,
+// 0x20202020,
+// 0x20202020,
+// 0x20202020,
+// 0x20202020,
+// 0x20202020,
};
static unsigned get_hcid(unsigned i)
{
- unsigned id = 0;
+ unsigned id = 0;
- unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff;
+ unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff;
- unsigned devn = sysconf.hcdn[i] & 0xff;
+ unsigned devn = sysconf.hcdn[i] & 0xff;
- device_t dev;
+ device_t dev;
- dev = dev_find_slot(busn, PCI_DEVFN(devn,0));
+ dev = dev_find_slot(busn, PCI_DEVFN(devn,0));
- switch (dev->device) {
- case 0x0369: //IO55
- id = 4;
- break;
- }
+ switch (dev->device) {
+ case 0x0369: //IO55
+ id = 4;
+ break;
+ }
- // we may need more way to find out hcid: subsystem id? GPIO read ?
+ // we may need more way to find out hcid: subsystem id? GPIO read ?
- // we need use id for 1. bus num, 2. mptable, 3. acpi table
+ // we need use id for 1. bus num, 2. mptable, 3. acpi table
- return id;
+ return id;
}
void get_bus_conf(void)
unsigned apicid_base;
struct mb_sysconf_t *m;
- device_t dev;
- int i, j;
+ device_t dev;
+ int i, j;
- if (get_bus_conf_done)
+ if (get_bus_conf_done)
return; //do it only once
- get_bus_conf_done = 1;
+ get_bus_conf_done = 1;
sysconf.mb = &mb_sysconf;
m = sysconf.mb;
memset(m, 0, sizeof(struct mb_sysconf_t));
- sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
-
- for (i = 0; i < sysconf.hc_possible_num; i++) {
- sysconf.pci1234[i] = pci1234x[i];
- sysconf.hcdn[i] = hcdnx[i];
- }
+ sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
+ for (i = 0; i < sysconf.hc_possible_num; i++) {
+ sysconf.pci1234[i] = pci1234x[i];
+ sysconf.hcdn[i] = hcdnx[i];
+ }
- get_sblk_pci1234();
+ get_sblk_pci1234();
sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain
if (!(sysconf.pci1234[i] & 0x1))
continue;
- busn_min = (sysconf.pci1234[i] >> 16) & 0xff;
- busn_max = (sysconf.pci1234[i] >> 24) & 0xff;
+ busn_min = (sysconf.pci1234[i] >> 16) & 0xff;
+ busn_max = (sysconf.pci1234[i] >> 24) & 0xff;
for (j = busn_min; j <= busn_max; j++)
m->bus_type[j] = 1;
if(m->bus_isa <= busn_max)
m->bus_isa = busn_max + 1;
- printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn_min, busn_max, m->bus_isa);
+ printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn_min, busn_max, m->bus_isa);
}
- /* MCP55b */
- for (i = 1; i < sysconf.hc_possible_num; i++) {
+ /* MCP55b */
+ for (i = 1; i < sysconf.hc_possible_num; i++) {
if (!(sysconf.pci1234[i] & 0x0f))
continue;
- // check hcid type here
- sysconf.hcid[i] = get_hcid(i);
- if (!sysconf.hcid[i])
+ // check hcid type here
+ sysconf.hcid[i] = get_hcid(i);
+ if (!sysconf.hcid[i])
continue; //unknown co processor
m->bus_mcp55b = (sysconf.pci1234[1]>>16) & 0xff;
apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
#endif
m->apicid_mcp55 = apicid_base+0;
- m->apicid_mcp55b = apicid_base+1;
+ m->apicid_mcp55b = apicid_base+1;
}
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-/* This file was generated by getpir.c, do not modify!
- (but if you do, please run checkpir on it to verify)
- Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
+/* This file was generated by getpir.c, do not modify!
+ * (but if you do, please run checkpir on it to verify)
+ * Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
- Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
+ * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
*/
#include <console/console.h>
#include <device/pci.h>
#include <cpu/amd/amdk8_sysconf.h>
#include "mb_sysconf.h"
-static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0,
+static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0,
uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3,
uint8_t slot, uint8_t rfu)
{
- pirq_info->bus = bus;
- pirq_info->devfn = devfn;
- pirq_info->irq[0].link = link0;
- pirq_info->irq[0].bitmap = bitmap0;
- pirq_info->irq[1].link = link1;
- pirq_info->irq[1].bitmap = bitmap1;
- pirq_info->irq[2].link = link2;
- pirq_info->irq[2].bitmap = bitmap2;
- pirq_info->irq[3].link = link3;
- pirq_info->irq[3].bitmap = bitmap3;
- pirq_info->slot = slot;
- pirq_info->rfu = rfu;
+ pirq_info->bus = bus;
+ pirq_info->devfn = devfn;
+ pirq_info->irq[0].link = link0;
+ pirq_info->irq[0].bitmap = bitmap0;
+ pirq_info->irq[1].link = link1;
+ pirq_info->irq[1].bitmap = bitmap1;
+ pirq_info->irq[2].link = link2;
+ pirq_info->irq[2].bitmap = bitmap2;
+ pirq_info->irq[3].link = link3;
+ pirq_info->irq[3].bitmap = bitmap3;
+ pirq_info->slot = slot;
+ pirq_info->rfu = rfu;
}
unsigned long write_pirq_routing_table(unsigned long addr)
struct mb_sysconf_t *m;
unsigned sbdn;
- uint8_t sum=0;
- int i;
+ uint8_t sum=0;
+ int i;
- get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
+ get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
sbdn = sysconf.sbdn;
m = sysconf.mb;
- /* Align the table to be 16 byte aligned. */
- addr += 15;
- addr &= ~15;
+ /* Align the table to be 16 byte aligned. */
+ addr += 15;
+ addr &= ~15;
- /* This table must be betweeen 0xf0000 & 0x100000 */
- printk_info("Writing IRQ routing tables to 0x%x...", addr);
+ /* This table must be betweeen 0xf0000 & 0x100000 */
+ printk_info("Writing IRQ routing tables to 0x%x...", addr);
pirq = (void *)(addr);
v = (uint8_t *)(addr);
write_pirq_info(pirq_info, m->bus_mcp55, ((sbdn+6)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
pirq_info++; slot_num++;
- for (i = 1; i < sysconf.hc_possible_num; i++) {
- if(!(sysconf.pci1234[i] & 0x1) ) continue;
- unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff;
- unsigned devn = sysconf.hcdn[i] & 0xff;
+ for (i = 1; i < sysconf.hc_possible_num; i++) {
+ if(!(sysconf.pci1234[i] & 0x1) ) continue;
+ unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff;
+ unsigned devn = sysconf.hcdn[i] & 0xff;
- write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
- pirq_info++; slot_num++;
+ write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+ pirq_info++; slot_num++;
}
pirq->size = 32 + 16 * slot_num;
- for (i = 0; i < pirq->size; i++)
- sum += v[i];
+ for (i = 0; i < pirq->size; i++)
+ sum += v[i];
sum = pirq->checksum - sum;
- if (sum != pirq->checksum) {
- pirq->checksum = sum;
- }
+ if (sum != pirq->checksum) {
+ pirq->checksum = sum;
+ }
printk_info("done.\n");
#define MB_SYSCONF_H
struct mb_sysconf_t {
- unsigned char bus_isa;
- unsigned char bus_mcp55;
- unsigned char bus_mcp55b;
- unsigned apicid_mcp55;
- unsigned apicid_mcp55b;
- unsigned bus_type[256];
+ unsigned char bus_isa;
+ unsigned char bus_mcp55;
+ unsigned char bus_mcp55b;
+ unsigned apicid_mcp55;
+ unsigned apicid_mcp55b;
+ unsigned bus_type[256];
unsigned sbdnb;
void *smp_write_config_table(void *v)
{
- static const char sig[4] = "PCMP";
- static const char oem[8] = "NVIDIA ";
- static const char productid[12] = "L1_2PVV ";
- struct mp_config_table *mc;
+ static const char sig[4] = "PCMP";
+ static const char oem[8] = "NVIDIA ";
+ static const char productid[12] = "L1_2PVV ";
+ struct mp_config_table *mc;
struct mb_sysconf_t *m;
unsigned sbdn;
int i,j;
unsigned char apicpin[4];
- mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
- memset(mc, 0, sizeof(*mc));
-
- memcpy(mc->mpc_signature, sig, sizeof(sig));
- mc->mpc_length = sizeof(*mc); /* initially just the header */
- mc->mpc_spec = 0x04;
- mc->mpc_checksum = 0; /* not yet computed */
- memcpy(mc->mpc_oem, oem, sizeof(oem));
- memcpy(mc->mpc_productid, productid, sizeof(productid));
- mc->mpc_oemptr = 0;
- mc->mpc_oemsize = 0;
- mc->mpc_entry_count = 0; /* No entries yet... */
- mc->mpc_lapic = LAPIC_ADDR;
- mc->mpe_length = 0;
- mc->mpe_checksum = 0;
- mc->reserved = 0;
-
- smp_write_processors(mc);
+ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+ memset(mc, 0, sizeof(*mc));
+
+ memcpy(mc->mpc_signature, sig, sizeof(sig));
+ mc->mpc_length = sizeof(*mc); /* initially just the header */
+ mc->mpc_spec = 0x04;
+ mc->mpc_checksum = 0; /* not yet computed */
+ memcpy(mc->mpc_oem, oem, sizeof(oem));
+ memcpy(mc->mpc_productid, productid, sizeof(productid));
+ mc->mpc_oemptr = 0;
+ mc->mpc_oemsize = 0;
+ mc->mpc_entry_count = 0; /* No entries yet... */
+ mc->mpc_lapic = LAPIC_ADDR;
+ mc->mpe_length = 0;
+ mc->mpe_checksum = 0;
+ mc->reserved = 0;
+
+ smp_write_processors(mc);
get_bus_conf();
sbdn = sysconf.sbdn;
/*Bus: Bus ID Type*/
/* define bus and isa numbers */
- for (j = 0; j < 256 ; j++) {
+ for (j = 0; j < 256 ; j++) {
if (m->bus_type[j])
smp_write_bus(mc, j, "PCI ");
- }
- smp_write_bus(mc, m->bus_isa, "ISA ");
+ }
+ smp_write_bus(mc, m->bus_isa, "ISA ");
/*I/O APICs: APIC ID Version State Address*/
- {
- device_t dev;
+ {
+ device_t dev;
struct resource *res;
uint32_t dword;
- dev = dev_find_slot(m->bus_mcp55, PCI_DEVFN(sbdn+ 0x1,0));
- if (dev) {
+ dev = dev_find_slot(m->bus_mcp55, PCI_DEVFN(sbdn+ 0x1,0));
+ if (dev) {
res = find_resource(dev, PCI_BASE_ADDRESS_1);
if (res)
smp_write_ioapic(mc, m->apicid_mcp55, 0x11, res->base);
dword = 0x43c6c643;
pci_write_config32(dev, 0x7c, dword);
- dword = 0x81001a00;
- pci_write_config32(dev, 0x80, dword);
+ dword = 0x81001a00;
+ pci_write_config32(dev, 0x80, dword);
dword = 0xd00012d2;
- pci_write_config32(dev, 0x84, dword);
+ pci_write_config32(dev, 0x84, dword);
- }
+ }
if (m->bus_mcp55b) {
- dev = dev_find_slot(m->bus_mcp55b, PCI_DEVFN(m->sbdnb + 0x1,0));
- if (dev) {
+ dev = dev_find_slot(m->bus_mcp55b, PCI_DEVFN(m->sbdnb + 0x1,0));
+ if (dev) {
res = find_resource(dev, PCI_BASE_ADDRESS_1);
if (res)
smp_write_ioapic(mc, m->apicid_mcp55b, 0x11, res->base);
dword = 0x43c60000;
pci_write_config32(dev, 0x7c, dword);
- dword = 0x81000000;
- pci_write_config32(dev, 0x80, dword);
+ dword = 0x81000000;
+ pci_write_config32(dev, 0x80, dword);
dword = 0xd00002d0;
- pci_write_config32(dev, 0x84, dword);
+ pci_write_config32(dev, 0x84, dword);
- }
+ }
}
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xe, m->apicid_mcp55, 0xe);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xf, m->apicid_mcp55, 0xf);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa); // 10
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa); // 10
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+6)<<2)|1, m->apicid_mcp55, 0x17); // 23
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+6)<<2)|1, m->apicid_mcp55, 0x17); // 23
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21
//Slot PCIE
for (j = 2; j < 8; j++) {
- device_t dev;
+ device_t dev;
dev = dev_find_slot(m->bus_mcp55, PCI_DEVFN(sbdn + 0x0a + j - 2 , 0));
if (!dev || !dev->enabled)
continue;
- for (i = 0; i < 4; i++)
- apicpin[i] = 0x10 + (2+j+i+4-sbdn%4)%4;
+ for (i = 0; i < 4; i++)
+ apicpin[i] = 0x10 + (2+j+i+4-sbdn%4)%4;
smp_write_intsrc_pci_bridge(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, dev, m->apicid_mcp55, apicpin);
}
//Slot PCI 32
{
- device_t dev;
+ device_t dev;
dev = dev_find_slot(m->bus_mcp55, PCI_DEVFN(sbdn + 6 , 0));
if (dev && dev->enabled) {
for (i = 0; i < 4; i++)
* 1 = base/limit registers i are read-only
* [ 7: 4] Reserved
* [31: 8] Memory-Mapped I/O Base Address i (39-16)
- * This field defines the upper address bits of a 40bit address
+ * This field defines the upper address bits of a 40bit address
* that defines the start of memory-mapped I/O region i
*/
PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
* [ 3: 2] Reserved
* [ 4: 4] VGA Enable
* 0 = VGA matches Disabled
- * 1 = matches all address < 64K and where A[9:0] is in the
+ * 1 = matches all address < 64K and where A[9:0] is in the
* range 3B0-3BB or 3C0-3DF independen of the base & limit registers
* [ 5: 5] ISA Enable
* 0 = ISA matches Disabled
* from matching agains this base/limit pair
* [11: 6] Reserved
* [24:12] PCI I/O Base i
- * This field defines the start of PCI I/O region n
+ * This field defines the start of PCI I/O region n
* [31:25] Reserved
*/
// PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033,
// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x3f000003, /* link 0 of cpu 0 --> Nvidia MCP55 Pro */
// PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f400203, /* link 2 of cpu 0 --> nvidia io55 */
PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
};
-##
+##
## This file is part of the coreboot project.
-##
+##
## Copyright (C) 2007 AMD
## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
-##
+##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
-##
+##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
-##
+##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
+##
##
## Compute the location and size of where this firmware image
## Compute the start location and size size of
## The coreboot bootloader.
##
-default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
+default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
##
end
end
-arch i386 end
+arch i386 end
##
## Build the objects we have code for in this directory.
if USE_DCACHE_RAM
- if CONFIG_USE_INIT
+ if CONFIG_USE_INIT
makerule ./cache_as_ram_auto.o
- depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
+ depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
+ action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
end
else
makerule ./cache_as_ram_auto.inc
- depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
- action "perl -e 's/.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/.text/.section .rom.text/g' -pi $@"
+ depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
+ action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
+ action "perl -e 's/.rodata/.rom.data/g' -pi $@"
+ action "perl -e 's/.text/.section .rom.text/g' -pi $@"
end
end
if USE_FAILOVER_IMAGE
else
if CONFIG_AP_CODE_IN_CAR
- makerule ./apc_auto.o
- depends "$(MAINBOARD)/apc_auto.c option_table.h"
- action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/apc_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
- end
- ldscript /arch/i386/init/ldscript_apc.lb
+ makerule ./apc_auto.o
+ depends "$(MAINBOARD)/apc_auto.c option_table.h"
+ action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/apc_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
+ end
+ ldscript /arch/i386/init/ldscript_apc.lb
end
end
mainboardinit cpu/x86/32bit/entry32.inc
if USE_DCACHE_RAM
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
+ if CONFIG_USE_INIT
+ ldscript /cpu/x86/32bit/entry32.lds
+ end
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
+ if CONFIG_USE_INIT
+ ldscript /cpu/amd/car/cache_as_ram.lds
+ end
end
## Build our reset vector (This is where coreboot is entered)
##
if HAVE_FAILOVER_BOOT
- if USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
+ if USE_FAILOVER_IMAGE
+ mainboardinit cpu/x86/16bit/reset16.inc
+ ldscript /cpu/x86/16bit/reset16.lds
else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
+ mainboardinit cpu/x86/32bit/reset32.inc
+ ldscript /cpu/x86/32bit/reset32.lds
end
else
- if USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
+ if USE_FALLBACK_IMAGE
+ mainboardinit cpu/x86/16bit/reset16.inc
+ ldscript /cpu/x86/16bit/reset16.lds
else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
+ mainboardinit cpu/x86/32bit/reset32.inc
+ ldscript /cpu/x86/32bit/reset32.lds
end
end
## ROMSTRAP table for MCP55
##
if HAVE_FAILOVER_BOOT
- if USE_FAILOVER_IMAGE
+ if USE_FAILOVER_IMAGE
mainboardinit southbridge/nvidia/mcp55/romstrap.inc
ldscript /southbridge/nvidia/mcp55/romstrap.lds
end
else
- if USE_FALLBACK_IMAGE
+ if USE_FALLBACK_IMAGE
mainboardinit southbridge/nvidia/mcp55/romstrap.inc
ldscript /southbridge/nvidia/mcp55/romstrap.lds
end
end
###
-### This is the early phase of coreboot startup
+### This is the early phase of coreboot startup
### Things are delicate and we test to see if we should
### failover to another image.
###
end
##
-## Include the secondary Configuration files
+## Include the secondary Configuration files
##
if CONFIG_CHIP_NAME
config chip.h
end
chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_F
- device apic 0 on end
- end
- end
+ device apic_cluster 0 on
+ chip cpu/amd/socket_F
+ device apic 0 on end
+ end
+ end
device pci_domain 0 on
chip northbridge/amd/amdk8 #mc0
device pci 18.0 on end
- device pci 18.0 on end
- device pci 18.0 on
- # devices on link 0, link 0 == LDT 0
- chip southbridge/nvidia/mcp55
+ device pci 18.0 on end
+ device pci 18.0 on
+ # devices on link 0, link 0 == LDT 0
+ chip southbridge/nvidia/mcp55
device pci 0.0 on end # HT
- device pci 1.0 on # LPC
+ device pci 1.0 on # LPC
chip superio/winbond/w83627hf
device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
+ device pnp 2e.1 off # Parallel Port
+ io 0x60 = 0x378
+ irq 0x70 = 7
end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
+ device pnp 2e.2 on # Com1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
end
- device pnp 2e.3 on # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
+ device pnp 2e.3 on # Com2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
+ device pnp 2e.5 on # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
irq 0x72 = 12
end
- device pnp 2e.6 off # SFI
- io 0x62 = 0x100
+ device pnp 2e.6 off # SFI
+ io 0x62 = 0x100
end
- device pnp 2e.7 off # GPIO_GAME_MIDI
+ device pnp 2e.7 off # GPIO_GAME_MIDI
io 0x60 = 0x220
io 0x62 = 0x300
irq 0x70 = 9
- end
- device pnp 2e.8 off end # WDTO_PLED
- device pnp 2e.9 off end # GPIO_SUSLED
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
+ end
+ device pnp 2e.8 off end # WDTO_PLED
+ device pnp 2e.9 off end # GPIO_SUSLED
+ device pnp 2e.a off end # ACPI
+ device pnp 2e.b on # HW Monitor
+ io 0x60 = 0x290
irq 0x70 = 5
- end
+ end
end
end
- device pci 1.1 on # SM 0
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- chip drivers/generic/generic #dimm 1-0-0
- device i2c 54 on end
- end
- chip drivers/generic/generic #dimm 1-0-1
- device i2c 55 on end
- end
- chip drivers/generic/generic #dimm 1-1-0
- device i2c 56 on end
- end
- chip drivers/generic/generic #dimm 1-1-1
- device i2c 57 on end
- end
+ device pci 1.1 on # SM 0
+ chip drivers/generic/generic #dimm 0-0-0
+ device i2c 50 on end
+ end
+ chip drivers/generic/generic #dimm 0-0-1
+ device i2c 51 on end
+ end
+ chip drivers/generic/generic #dimm 0-1-0
+ device i2c 52 on end
+ end
+ chip drivers/generic/generic #dimm 0-1-1
+ device i2c 53 on end
+ end
+ chip drivers/generic/generic #dimm 1-0-0
+ device i2c 54 on end
+ end
+ chip drivers/generic/generic #dimm 1-0-1
+ device i2c 55 on end
+ end
+ chip drivers/generic/generic #dimm 1-1-0
+ device i2c 56 on end
+ end
+ chip drivers/generic/generic #dimm 1-1-1
+ device i2c 57 on end
+ end
end # SM
- device pci 1.1 on # SM 1
+ device pci 1.1 on # SM 1
#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus?
-# chip drivers/generic/generic #PCIXA Slot1
-# device i2c 50 on end
-# end
-# chip drivers/generic/generic #PCIXB Slot1
-# device i2c 51 on end
-# end
-# chip drivers/generic/generic #PCIXB Slot2
-# device i2c 52 on end
-# end
-# chip drivers/generic/generic #PCI Slot1
-# device i2c 53 on end
-# end
-# chip drivers/generic/generic #Master MCP55 PCI-E
-# device i2c 54 on end
-# end
-# chip drivers/generic/generic #Slave MCP55 PCI-E
-# device i2c 55 on end
-# end
- chip drivers/generic/generic #MAC EEPROM
- device i2c 51 on end
- end
+# chip drivers/generic/generic #PCIXA Slot1
+# device i2c 50 on end
+# end
+# chip drivers/generic/generic #PCIXB Slot1
+# device i2c 51 on end
+# end
+# chip drivers/generic/generic #PCIXB Slot2
+# device i2c 52 on end
+# end
+# chip drivers/generic/generic #PCI Slot1
+# device i2c 53 on end
+# end
+# chip drivers/generic/generic #Master MCP55 PCI-E
+# device i2c 54 on end
+# end
+# chip drivers/generic/generic #Slave MCP55 PCI-E
+# device i2c 55 on end
+# end
+ chip drivers/generic/generic #MAC EEPROM
+ device i2c 51 on end
+ end
- end # SM
- device pci 2.0 on end # USB 1.1
- device pci 2.1 on end # USB 2
- device pci 4.0 on end # IDE
- device pci 5.0 on end # SATA 0
- device pci 5.1 on end # SATA 1
- device pci 5.2 on end # SATA 2
- device pci 6.0 on end # PCI
- device pci 6.1 off end # AZA
- device pci 8.0 on end # NIC
- device pci 9.0 on end # NIC
- device pci a.0 on end # PCI E 5
- device pci b.0 off end # PCI E 4
- device pci c.0 off end # PCI E 3
- device pci d.0 on end # PCI E 2
- device pci e.0 off end # PCI E 1
- device pci f.0 on end # PCI E 0
- register "ide0_enable" = "1"
- register "sata0_enable" = "1"
- register "sata1_enable" = "1"
+ end # SM
+ device pci 2.0 on end # USB 1.1
+ device pci 2.1 on end # USB 2
+ device pci 4.0 on end # IDE
+ device pci 5.0 on end # SATA 0
+ device pci 5.1 on end # SATA 1
+ device pci 5.2 on end # SATA 2
+ device pci 6.0 on end # PCI
+ device pci 6.1 off end # AZA
+ device pci 8.0 on end # NIC
+ device pci 9.0 on end # NIC
+ device pci a.0 on end # PCI E 5
+ device pci b.0 off end # PCI E 4
+ device pci c.0 off end # PCI E 3
+ device pci d.0 on end # PCI E 2
+ device pci e.0 off end # PCI E 1
+ device pci f.0 on end # PCI E 0
+ register "ide0_enable" = "1"
+ register "sata0_enable" = "1"
+ register "sata1_enable" = "1"
register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1
register "mac_eeprom_addr" = "0x51"
end
- end # device pci 18.0
+ end # device pci 18.0
device pci 18.1 on end
device pci 18.2 on end
device pci 18.3 on end
end # mc0
-
+
end # PCI domain
-
-# chip drivers/generic/debug
-# device pnp 0.0 off end # chip name
-# device pnp 0.1 on end # pci_regs_all
-# device pnp 0.2 on end # mem
-# device pnp 0.3 off end # cpuid
-# device pnp 0.4 on end # smbus_regs_all
-# device pnp 0.5 off end # dual core msr
-# device pnp 0.6 off end # cache size
-# device pnp 0.7 off end # tsc
-# device pnp 0.8 off end # io
-# device pnp 0.9 off end # io
-# end
+
+# chip drivers/generic/debug
+# device pnp 0.0 off end # chip name
+# device pnp 0.1 on end # pci_regs_all
+# device pnp 0.2 on end # mem
+# device pnp 0.3 off end # cpuid
+# device pnp 0.4 on end # smbus_regs_all
+# device pnp 0.5 off end # dual core msr
+# device pnp 0.6 off end # cache size
+# device pnp 0.7 off end # tsc
+# device pnp 0.8 off end # io
+# device pnp 0.9 off end # io
+# end
end #root_complex
-##
+##
## This file is part of the coreboot project.
-##
+##
## Copyright (C) 2007 AMD
## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
-##
+##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
-##
+##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
-##
+##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
+##
uses HAVE_MP_TABLE
uses HAVE_PIRQ_TABLE
#CHIP_NAME ?
default CONFIG_CHIP_NAME=1
-#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead.
+#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead.
#2G
#default HW_MEM_HOLE_SIZEK=0x200000
#1G
###
### Defaults of options that you may want to override in the target config file
-###
+###
##
## The default compiler
##
## Disable the gdb stub by default
-##
+##
default CONFIG_GDB_STUB=0
##
##
### Select the coreboot loglevel
##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
+## EMERG 1 system is unusable
+## ALERT 2 action must be taken immediately
+## CRIT 3 critical conditions
+## ERR 4 error conditions
+## WARNING 5 warning conditions
+## NOTICE 6 normal but significant condition
+## INFO 7 informational
+## DEBUG 8 debug-level messages
+## SPEW 9 Way too many details
## Request this level of debugging output
default DEFAULT_CONSOLE_LOGLEVEL=8
#include "pc80/serial.c"
#if CONFIG_USE_INIT == 0
- #include "lib/memcpy.c"
+ #include "lib/memcpy.c"
#endif
#include "arch/i386/lib/console.c"
-#if 0
-static void post_code(uint8_t value) {
-#if 1
- int i;
- for(i=0;i<0x80000;i++) {
- outb(value, 0x80);
- }
-#endif
-}
-#endif
-
#include <cpu/amd/model_fxx_rev.h>
#include "northbridge/amd/amdk8/raminit.h"
#include "cpu/amd/model_fxx/apic_timer.c"
void hardwaremain(int ret_addr)
{
struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); // in CACHE
- struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM
+ struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM
struct node_core_id id;
id = get_node_core_id_x();
//FIXME: for USBDEBUG_DIRECT you need to make sure dbg_info get assigned in AP
- print_debug("CODE IN CACHE ON NODE:"); print_debug_hex8(id.nodeid); print_debug("\r\n");
+ print_debug("CODE IN CACHE ON NODE:"); print_debug_hex8(id.nodeid); print_debug("\r\n");
train_ram(id.nodeid, sysinfo, sysinfox);
go back, but can not use stack any more, because we only keep ret_addr and can not restore esp, and ebp
*/
- __asm__ volatile (
- "movl %0, %%edi\n\t"
- "jmp *%%edi\n\t"
- :: "a"(ret_addr)
- );
+ __asm__ volatile (
+ "movl %0, %%edi\n\t"
+ "jmp *%%edi\n\t"
+ :: "a"(ret_addr)
+ );
}
struct eregs {
- uint32_t eax, ecx, edx, ebx, esp, ebp, esi, edi;
- uint32_t vector;
- uint32_t error_code;
- uint32_t eip;
- uint32_t cs;
- uint32_t eflags;
+ uint32_t eax, ecx, edx, ebx, esp, ebp, esi, edi;
+ uint32_t vector;
+ uint32_t error_code;
+ uint32_t eip;
+ uint32_t cs;
+ uint32_t eflags;
};
void x86_exception(struct eregs *info)
{
- do {
- hlt();
- } while(1);
+ do {
+ hlt();
+ } while(1);
}
#endif
#define DBGP_DEFAULT 7
-
+
#include <stdint.h>
#include <device/pci_def.h>
#include <device/pci_ids.h>
#include "cpu/x86/bist.h"
#if CONFIG_USE_INIT == 0
- #include "lib/memcpy.c"
+ #include "lib/memcpy.c"
#endif
#include "northbridge/amd/amdk8/debug.c"
#include "sdram/generic_sdram.c"
-#include "resourcemap.c"
+#include "resourcemap.c"
#include "cpu/amd/dualcore/dualcore.c"
#define MCP55_PCI_E_X_0 1
#define MCP55_MB_SETUP \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */
#include "southbridge/nvidia/mcp55/mcp55_early_setup_ss.h"
#include "southbridge/nvidia/mcp55/mcp55_early_setup_car.c"
static void sio_setup(void)
{
- unsigned value;
- uint32_t dword;
- uint8_t byte;
-
- byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b);
- byte |= 0x20;
- pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte);
-
- dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0);
- /*serial 0 */
- dword |= (1<<0);
- pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword);
-
- dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4);
- dword |= (1<<16);
- pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword);
+ unsigned value;
+ uint32_t dword;
+ uint8_t byte;
+
+ byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b);
+ byte |= 0x20;
+ pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte);
+
+ dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0);
+ /*serial 0 */
+ dword |= (1<<0);
+ pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword);
+
+ dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4);
+ dword |= (1<<16);
+ pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword);
}
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- sio_setup();
-
- /* Setup the mcp55 */
- mcp55_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
+ unsigned last_boot_normal_x = last_boot_normal();
+
+ /* Is this a cpu only reset? or Is this a secondary cpu? */
+ if ((cpu_init_detectedx) || (!boot_cpu())) {
+ if (last_boot_normal_x) {
+ goto normal_image;
+ } else {
+ goto fallback_image;
+ }
+ }
+
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ sio_setup();
+
+ /* Setup the mcp55 */
+ mcp55_enable_rom();
+
+ /* Is this a deliberate reset by the bios */
+ if (bios_reset_detected() && last_boot_normal_x) {
+ goto normal_image;
+ }
+ /* This is the primary cpu how should I boot? */
+ else if (do_normal_boot()) {
+ goto normal_image;
+ }
+ else {
+ goto fallback_image;
+ }
normal_image:
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
- );
+ __asm__ volatile ("jmp __normal_image"
+ : /* outputs */
+ : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
+ );
fallback_image:
#if HAVE_FAILOVER_BOOT==1
- __asm__ volatile ("jmp __fallback_image"
- : /* outputs */
- : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
- )
+ __asm__ volatile ("jmp __fallback_image"
+ : /* outputs */
+ : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
+ )
#endif
;
}
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-#if HAVE_FAILOVER_BOOT==1
+#if HAVE_FAILOVER_BOOT==1
#if USE_FAILOVER_IMAGE==1
- failover_process(bist, cpu_init_detectedx);
+ failover_process(bist, cpu_init_detectedx);
#else
real_main(bist, cpu_init_detectedx);
#endif
#else
#if USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
+ failover_process(bist, cpu_init_detectedx);
#endif
real_main(bist, cpu_init_detectedx);
#endif
#endif
};
- struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE);
+ struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE);
- int needs_reset = 0;
- unsigned bsp_apicid = 0;
+ int needs_reset = 0;
+ unsigned bsp_apicid = 0;
- if (bist == 0) {
+ if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
+ }
w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
- setup_mb_resource_map();
+ setup_mb_resource_map();
+
+ uart_init();
- uart_init();
-
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
mcp55_enable_usbdebug_direct(DBGP_DEFAULT);
early_usbdebug_direct_init();
#endif
- console_init();
- print_debug("*sysinfo range: ["); print_debug_hex32(sysinfo); print_debug(","); print_debug_hex32((unsigned long)sysinfo+sizeof(struct sys_info)); print_debug(")\r\n");
+ console_init();
+ print_debug("*sysinfo range: ["); print_debug_hex32(sysinfo); print_debug(","); print_debug_hex32((unsigned long)sysinfo+sizeof(struct sys_info)); print_debug(")\r\n");
- print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\r\n");
+ print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\r\n");
#if MEM_TRAIN_SEQ == 1
- set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram
+ set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram
#endif
- setup_coherent_ht_domain(); // routing table and start other core0
+ setup_coherent_ht_domain(); // routing table and start other core0
- wait_all_core0_started();
+ wait_all_core0_started();
#if CONFIG_LOGICAL_CPUS==1
- // It is said that we should start core1 after all core0 launched
- /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain,
- * So here need to make sure last core0 is started, esp for two way system,
- * (there may be apic id conflicts in that case)
- */
- start_other_cores();
- wait_all_other_cores_started(bsp_apicid);
+ // It is said that we should start core1 after all core0 launched
+ /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain,
+ * So here need to make sure last core0 is started, esp for two way system,
+ * (there may be apic id conflicts in that case)
+ */
+ start_other_cores();
+ wait_all_other_cores_started(bsp_apicid);
#endif
- /* it will set up chains and store link pair for optimization later */
- ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
+ /* it will set up chains and store link pair for optimization later */
+ ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
#if K8_SET_FIDVID == 1
- {
- msr_t msr;
- msr=rdmsr(0xc0010042);
- print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n");
+ {
+ msr_t msr;
+ msr=rdmsr(0xc0010042);
+ print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n");
- }
+ }
- enable_fid_change();
+ enable_fid_change();
- enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
+ enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
- init_fidvid_bsp(bsp_apicid);
+ init_fidvid_bsp(bsp_apicid);
- // show final fid and vid
- {
- msr_t msr;
- msr=rdmsr(0xc0010042);
- print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n");
+ // show final fid and vid
+ {
+ msr_t msr;
+ msr=rdmsr(0xc0010042);
+ print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n");
- }
+ }
#endif
- needs_reset |= optimize_link_coherent_ht();
- needs_reset |= optimize_link_incoherent_ht(sysinfo);
- needs_reset |= mcp55_early_setup_x();
+ needs_reset |= optimize_link_coherent_ht();
+ needs_reset |= optimize_link_incoherent_ht(sysinfo);
+ needs_reset |= mcp55_early_setup_x();
- // fidvid change will issue one LDTSTOP and the HT change will be effective too
- if (needs_reset) {
- print_info("ht reset -\r\n");
- soft_reset();
- }
+ // fidvid change will issue one LDTSTOP and the HT change will be effective too
+ if (needs_reset) {
+ print_info("ht reset -\r\n");
+ soft_reset();
+ }
- allow_all_aps_stop(bsp_apicid);
+ allow_all_aps_stop(bsp_apicid);
- //It's the time to set ctrl in sysinfo now;
+ //It's the time to set ctrl in sysinfo now;
fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
- enable_smbus();
+ enable_smbus();
- memreset_setup();
+ memreset_setup();
- //do we need apci timer, tsc...., only debug need it for better output
- /* all ap stopped? */
-// init_timer(); // Need to use TMICT to synconize FID/VID
+ //do we need apci timer, tsc...., only debug need it for better output
+ /* all ap stopped? */
+// init_timer(); // Need to use TMICT to synconize FID/VID
- sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
+ sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
- post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now
+ post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now
}
-##
+##
## This file is part of the coreboot project.
-##
+##
## Copyright (C) 2007 AMD
## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
-##
+##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
-##
+##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
-##
+##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
+##
entries
395 1 e 1 hw_scrubber
396 1 e 1 interleave_chip_selects
397 2 e 8 max_mem_clock
-399 1 e 2 dual_core
+399 1 e 2 dual_core
400 1 e 1 power_on_after_fail
412 4 e 6 debug_level
416 4 e 7 boot_first
420 4 e 7 boot_second
424 4 e 7 boot_third
428 4 h 0 boot_index
-432 8 h 0 boot_countdown
+432 8 h 0 boot_countdown
440 4 e 9 slow_cpu
444 1 e 1 nmi
445 1 e 1 iommu
// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables
struct mb_sysconf_t mb_sysconf;
-unsigned pci1234x[] =
-{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not
+unsigned pci1234x[] =
+{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not
//You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
- 0x0000ff0,
- 0x0000ff0,
- 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0
+ 0x0000ff0,
+ 0x0000ff0,
+ 0x0000ff0,
+// 0x0000ff0,
+// 0x0000ff0,
+// 0x0000ff0,
+// 0x0000ff0,
+// 0x0000ff0
};
-unsigned hcdnx[] =
+unsigned hcdnx[] =
{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most
0x20202020,
0x20202020,
- 0x20202020,
-// 0x20202020,
-// 0x20202020,
-// 0x20202020,
-// 0x20202020,
-// 0x20202020,
+ 0x20202020,
+// 0x20202020,
+// 0x20202020,
+// 0x20202020,
+// 0x20202020,
+// 0x20202020,
};
static unsigned get_hcid(unsigned i)
{
- unsigned id = 0;
+ unsigned id = 0;
- unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff;
+ unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff;
- unsigned devn = sysconf.hcdn[i] & 0xff;
+ unsigned devn = sysconf.hcdn[i] & 0xff;
- device_t dev;
+ device_t dev;
- dev = dev_find_slot(busn, PCI_DEVFN(devn,0));
+ dev = dev_find_slot(busn, PCI_DEVFN(devn,0));
- switch (dev->device) {
- case 0x0369: //IO55
- id = 4;
- break;
- }
+ switch (dev->device) {
+ case 0x0369: //IO55
+ id = 4;
+ break;
+ }
- // we may need more way to find out hcid: subsystem id? GPIO read ?
+ // we may need more way to find out hcid: subsystem id? GPIO read ?
- // we need use id for 1. bus num, 2. mptable, 3. acpi table
+ // we need use id for 1. bus num, 2. mptable, 3. acpi table
- return id;
+ return id;
}
void get_bus_conf(void)
unsigned apicid_base;
struct mb_sysconf_t *m;
- device_t dev;
- int i, j;
+ device_t dev;
+ int i, j;
- if(get_bus_conf_done==1) return; //do it only once
+ if(get_bus_conf_done==1) return; //do it only once
- get_bus_conf_done = 1;
+ get_bus_conf_done = 1;
sysconf.mb = &mb_sysconf;
-
+
m = sysconf.mb;
memset(m, 0, sizeof(struct mb_sysconf_t));
- sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
- for(i=0;i<sysconf.hc_possible_num; i++) {
- sysconf.pci1234[i] = pci1234x[i];
- sysconf.hcdn[i] = hcdnx[i];
- }
+ sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
+ for(i=0;i<sysconf.hc_possible_num; i++) {
+ sysconf.pci1234[i] = pci1234x[i];
+ sysconf.hcdn[i] = hcdnx[i];
+ }
- get_sblk_pci1234();
+ get_sblk_pci1234();
sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain
m->bus_type[0] = 1; //pci
-
+
m->bus_mcp55[0] = (sysconf.pci1234[0] >> 16) & 0xff;
- /* MCP55 */
- dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x06,0));
- if (dev) {
- m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
- }
- else {
- printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06);
- }
+ /* MCP55 */
+ dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x06,0));
+ if (dev) {
+ m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ }
+ else {
+ printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06);
+ }
for(i=2; i<8;i++) {
- dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2 , 0));
- if (dev) {
- m->bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
- }
- else {
- printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 );
- }
+ dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2 , 0));
+ if (dev) {
+ m->bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ }
+ else {
+ printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 );
+ }
}
for(i=0; i< sysconf.hc_possible_num; i++) {
if(!(sysconf.pci1234[i] & 0x1) ) continue;
- unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff;
- unsigned busn_max = (sysconf.pci1234[i] >> 24) & 0xff;
- for (j = busn; j <= busn_max; j++)
+ unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff;
+ unsigned busn_max = (sysconf.pci1234[i] >> 24) & 0xff;
+ for (j = busn; j <= busn_max; j++)
m->bus_type[j] = 1;
- if(m->bus_isa <= busn_max)
+ if(m->bus_isa <= busn_max)
m->bus_isa = busn_max + 1;
- printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa);
+ printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa);
}
-
-
/*I/O APICs: APIC ID Version State Address*/
#if CONFIG_LOGICAL_CPUS==1
apicid_base = get_apicid_base(1);
-#else
- apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
+#else
+ apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
#endif
m->apicid_mcp55 = apicid_base+0;
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-/* This file was generated by getpir.c, do not modify!
- (but if you do, please run checkpir on it to verify)
- Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
+/* This file was generated by getpir.c, do not modify!
+ * (but if you do, please run checkpir on it to verify)
+ * Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
- Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
+ * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
*/
#include <console/console.h>
#include <device/pci.h>
#include <cpu/amd/amdk8_sysconf.h>
#include "mb_sysconf.h"
-static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0,
+static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0,
uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3,
uint8_t slot, uint8_t rfu)
{
- pirq_info->bus = bus;
- pirq_info->devfn = devfn;
- pirq_info->irq[0].link = link0;
- pirq_info->irq[0].bitmap = bitmap0;
- pirq_info->irq[1].link = link1;
- pirq_info->irq[1].bitmap = bitmap1;
- pirq_info->irq[2].link = link2;
- pirq_info->irq[2].bitmap = bitmap2;
- pirq_info->irq[3].link = link3;
- pirq_info->irq[3].bitmap = bitmap3;
- pirq_info->slot = slot;
- pirq_info->rfu = rfu;
+ pirq_info->bus = bus;
+ pirq_info->devfn = devfn;
+ pirq_info->irq[0].link = link0;
+ pirq_info->irq[0].bitmap = bitmap0;
+ pirq_info->irq[1].link = link1;
+ pirq_info->irq[1].bitmap = bitmap1;
+ pirq_info->irq[2].link = link2;
+ pirq_info->irq[2].bitmap = bitmap2;
+ pirq_info->irq[3].link = link3;
+ pirq_info->irq[3].bitmap = bitmap3;
+ pirq_info->slot = slot;
+ pirq_info->rfu = rfu;
}
unsigned long write_pirq_routing_table(unsigned long addr)
struct mb_sysconf_t *m;
unsigned sbdn;
- uint8_t sum=0;
- int i;
+ uint8_t sum=0;
+ int i;
- get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
+ get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
sbdn = sysconf.sbdn;
m = sysconf.mb;
- /* Align the table to be 16 byte aligned. */
- addr += 15;
- addr &= ~15;
+ /* Align the table to be 16 byte aligned. */
+ addr += 15;
+ addr &= ~15;
- /* This table must be betweeen 0xf0000 & 0x100000 */
- printk_info("Writing IRQ routing tables to 0x%x...", addr);
+ /* This table must be betweeen 0xf0000 & 0x100000 */
+ printk_info("Writing IRQ routing tables to 0x%x...", addr);
pirq = (void *)(addr);
v = (uint8_t *)(addr);
-
+
pirq->signature = PIRQ_SIGNATURE;
pirq->version = PIRQ_VERSION;
-
+
pirq->rtr_bus = m->bus_mcp55[0];
pirq->rtr_devfn = ((sbdn+6)<<3)|0;
pirq->exclusive_irqs = 0;
-
+
pirq->rtr_vendor = 0x10de;
pirq->rtr_device = 0x0370;
//pci bridge
write_pirq_info(pirq_info, m->bus_mcp55[0], ((sbdn+6)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
pirq_info++; slot_num++;
-
- for(i=1; i< sysconf.hc_possible_num; i++) {
- if(!(sysconf.pci1234[i] & 0x1) ) continue;
- unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff;
- unsigned devn = sysconf.hcdn[i] & 0xff;
-
- write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
- pirq_info++; slot_num++;
+
+ for(i=1; i< sysconf.hc_possible_num; i++) {
+ if(!(sysconf.pci1234[i] & 0x1) ) continue;
+ unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff;
+ unsigned devn = sysconf.hcdn[i] & 0xff;
+
+ write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+ pirq_info++; slot_num++;
}
- pirq->size = 32 + 16 * slot_num;
+ pirq->size = 32 + 16 * slot_num;
- for (i = 0; i < pirq->size; i++)
- sum += v[i];
+ for (i = 0; i < pirq->size; i++)
+ sum += v[i];
sum = pirq->checksum - sum;
- if (sum != pirq->checksum) {
- pirq->checksum = sum;
- }
+ if (sum != pirq->checksum) {
+ pirq->checksum = sum;
+ }
printk_info("done.\n");
#define MB_SYSCONF_H
struct mb_sysconf_t {
- unsigned char bus_isa;
- unsigned char bus_mcp55[8]; //1
- unsigned apicid_mcp55;
+ unsigned char bus_isa;
+ unsigned char bus_mcp55[8]; //1
+ unsigned apicid_mcp55;
unsigned bus_type[256];
};
void *smp_write_config_table(void *v)
{
- static const char sig[4] = "PCMP";
- static const char oem[8] = "TYAN ";
- static const char productid[12] = "S2895 ";
- struct mp_config_table *mc;
+ static const char sig[4] = "PCMP";
+ static const char oem[8] = "TYAN ";
+ static const char productid[12] = "S2895 ";
+ struct mp_config_table *mc;
struct mb_sysconf_t *m;
unsigned sbdn;
int i,j;
- mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
- memset(mc, 0, sizeof(*mc));
-
- memcpy(mc->mpc_signature, sig, sizeof(sig));
- mc->mpc_length = sizeof(*mc); /* initially just the header */
- mc->mpc_spec = 0x04;
- mc->mpc_checksum = 0; /* not yet computed */
- memcpy(mc->mpc_oem, oem, sizeof(oem));
- memcpy(mc->mpc_productid, productid, sizeof(productid));
- mc->mpc_oemptr = 0;
- mc->mpc_oemsize = 0;
- mc->mpc_entry_count = 0; /* No entries yet... */
- mc->mpc_lapic = LAPIC_ADDR;
- mc->mpe_length = 0;
- mc->mpe_checksum = 0;
- mc->reserved = 0;
-
- smp_write_processors(mc);
+ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+ memset(mc, 0, sizeof(*mc));
+
+ memcpy(mc->mpc_signature, sig, sizeof(sig));
+ mc->mpc_length = sizeof(*mc); /* initially just the header */
+ mc->mpc_spec = 0x04;
+ mc->mpc_checksum = 0; /* not yet computed */
+ memcpy(mc->mpc_oem, oem, sizeof(oem));
+ memcpy(mc->mpc_productid, productid, sizeof(productid));
+ mc->mpc_oemptr = 0;
+ mc->mpc_oemsize = 0;
+ mc->mpc_entry_count = 0; /* No entries yet... */
+ mc->mpc_lapic = LAPIC_ADDR;
+ mc->mpe_length = 0;
+ mc->mpe_checksum = 0;
+ mc->reserved = 0;
+
+ smp_write_processors(mc);
get_bus_conf();
sbdn = sysconf.sbdn;
m = sysconf.mb;
/*Bus: Bus ID Type*/
- /* define bus and isa numbers */
- for(j= 0; j < 256 ; j++) {
+ /* define bus and isa numbers */
+ for(j= 0; j < 256 ; j++) {
if(m->bus_type[j])
smp_write_bus(mc, j, "PCI ");
- }
- smp_write_bus(mc, m->bus_isa, "ISA ");
+ }
+ smp_write_bus(mc, m->bus_isa, "ISA ");
/*I/O APICs: APIC ID Version State Address*/
- {
- device_t dev;
+ {
+ device_t dev;
struct resource *res;
uint32_t dword;
- dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0));
- if (dev) {
+ dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0));
+ if (dev) {
res = find_resource(dev, PCI_BASE_ADDRESS_1);
if (res) {
smp_write_ioapic(mc, m->apicid_mcp55, 0x11, res->base);
}
dword = 0x43c6c643;
- pci_write_config32(dev, 0x7c, dword);
+ pci_write_config32(dev, 0x7c, dword);
- dword = 0x81001a00;
- pci_write_config32(dev, 0x80, dword);
+ dword = 0x81001a00;
+ pci_write_config32(dev, 0x80, dword);
- dword = 0xd00002d2;
- pci_write_config32(dev, 0x84, dword);
+ dword = 0xd00002d2;
+ pci_write_config32(dev, 0x84, dword);
- }
+ }
}
-
- /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
+
+ /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, m->apicid_mcp55, 0x0);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x1, m->apicid_mcp55, 0x1);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, m->apicid_mcp55, 0x2);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xe, m->apicid_mcp55, 0xe);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xf, m->apicid_mcp55, 0xf);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21
for(j=7; j>=2; j--) {
if(!m->bus_mcp55[j]) continue;
- for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[j], (0x00<<2)|i, m->apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4);
- }
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[j], (0x00<<2)|i, m->apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4);
+ }
}
- for(j=0; j<1; j++)
- for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[1], ((0x04+j)<<2)|i, m->apicid_mcp55, 0x10 + (2+i+j)%4);
- }
+ for(j=0; j<1; j++)
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[1], ((0x04+j)<<2)|i, m->apicid_mcp55, 0x10 + (2+i+j)%4);
+ }
/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/
smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, MP_APIC_ALL, 0x0);
* 1 = base/limit registers i are read-only
* [ 7: 4] Reserved
* [31: 8] Memory-Mapped I/O Base Address i (39-16)
- * This field defines the upper address bits of a 40bit address
+ * This field defines the upper address bits of a 40bit address
* that defines the start of memory-mapped I/O region i
*/
PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
* [ 3: 2] Reserved
* [ 4: 4] VGA Enable
* 0 = VGA matches Disabled
- * 1 = matches all address < 64K and where A[9:0] is in the
+ * 1 = matches all address < 64K and where A[9:0] is in the
* range 3B0-3BB or 3C0-3DF independen of the base & limit registers
* [ 5: 5] ISA Enable
* 0 = ISA matches Disabled
* from matching agains this base/limit pair
* [11: 6] Reserved
* [24:12] PCI I/O Base i
- * This field defines the start of PCI I/O region n
+ * This field defines the start of PCI I/O region n
* [31:25] Reserved
*/
// PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033,
// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x3f000003, /* link 0 of cpu 0 --> Nvidia MCP55 Pro */
// PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f400203, /* link 2 of cpu 0 --> nvidia io55 */
PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
};
-##
+##
## This file is part of the coreboot project.
-##
+##
## Copyright (C) 2007 AMD
## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
-##
+##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
-##
+##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
-##
+##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
+##
##
## Compute the location and size of where this firmware image
## Compute the start location and size size of
## The coreboot bootloader.
##
-default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
+default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
##
end
end
-arch i386 end
+arch i386 end
##
## Build the objects we have code for in this directory.
if USE_DCACHE_RAM
makedefine CACHE_AS_RAM_AUTO_C:=cache_as_ram_auto.c
- if CONFIG_USE_INIT
+ if CONFIG_USE_INIT
makerule ./cache_as_ram_auto.o
depends "$(MAINBOARD)/$(CACHE_AS_RAM_AUTO_C) option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
+ action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
end
else
makerule ./cache_as_ram_auto.inc
depends "$(MAINBOARD)/$(CACHE_AS_RAM_AUTO_C) option_table.h"
action "$(CC) -I$(TOP)/src -I. $(CFLAGS) $(CPPFLAGS) $(MAINBOARD)/$(CACHE_AS_RAM_AUTO_C) -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
- action "perl -e 's/.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/.text/.section .rom.text/g' -pi $@"
+ action "perl -e 's/.rodata/.rom.data/g' -pi $@"
+ action "perl -e 's/.text/.section .rom.text/g' -pi $@"
end
end
if USE_FAILOVER_IMAGE
else
if CONFIG_AP_CODE_IN_CAR
- makerule ./apc_auto.o
- depends "$(MAINBOARD)/apc_auto.c option_table.h"
- action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/apc_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
- end
- ldscript /arch/i386/init/ldscript_apc.lb
+ makerule ./apc_auto.o
+ depends "$(MAINBOARD)/apc_auto.c option_table.h"
+ action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/apc_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
+ end
+ ldscript /arch/i386/init/ldscript_apc.lb
end
end
mainboardinit cpu/x86/32bit/entry32.inc
if USE_DCACHE_RAM
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
+ if CONFIG_USE_INIT
+ ldscript /cpu/x86/32bit/entry32.lds
+ end
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
+ if CONFIG_USE_INIT
+ ldscript /cpu/amd/car/cache_as_ram.lds
+ end
end
## Build our reset vector (This is where coreboot is entered)
##
if HAVE_FAILOVER_BOOT
- if USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
+ if USE_FAILOVER_IMAGE
+ mainboardinit cpu/x86/16bit/reset16.inc
+ ldscript /cpu/x86/16bit/reset16.lds
else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
+ mainboardinit cpu/x86/32bit/reset32.inc
+ ldscript /cpu/x86/32bit/reset32.lds
end
else
- if USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
+ if USE_FALLBACK_IMAGE
+ mainboardinit cpu/x86/16bit/reset16.inc
+ ldscript /cpu/x86/16bit/reset16.lds
else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
+ mainboardinit cpu/x86/32bit/reset32.inc
+ ldscript /cpu/x86/32bit/reset32.lds
end
end
## ROMSTRAP table for MCP55
##
if HAVE_FAILOVER_BOOT
- if USE_FAILOVER_IMAGE
+ if USE_FAILOVER_IMAGE
mainboardinit southbridge/nvidia/mcp55/romstrap.inc
ldscript /southbridge/nvidia/mcp55/romstrap.lds
end
else
- if USE_FALLBACK_IMAGE
+ if USE_FALLBACK_IMAGE
mainboardinit southbridge/nvidia/mcp55/romstrap.inc
ldscript /southbridge/nvidia/mcp55/romstrap.lds
end
end
###
-### This is the early phase of coreboot startup
+### This is the early phase of coreboot startup
### Things are delicate and we test to see if we should
### failover to another image.
###
end
##
-## Include the secondary Configuration files
+## Include the secondary Configuration files
##
if CONFIG_CHIP_NAME
config chip.h
dir /southbridge/nvidia/mcp55
chip northbridge/amd/amdfam10/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_F_1207
- device apic 0 on end
- end
- end
+ device apic_cluster 0 on
+ chip cpu/amd/socket_F_1207
+ device apic 0 on end
+ end
+ end
device pci_domain 0 on
chip northbridge/amd/amdfam10 #mc0
device pci 18.0 on end
- device pci 18.0 on end
- device pci 18.0 on
+ device pci 18.0 on end
+ device pci 18.0 on
# SB on link 2.0.
- chip southbridge/nvidia/mcp55
+ chip southbridge/nvidia/mcp55
device pci 0.0 on end # HT
- device pci 1.0 on # LPC
+ device pci 1.0 on # LPC
chip superio/winbond/w83627hf
device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
+ device pnp 2e.1 off # Parallel Port
+ io 0x60 = 0x378
+ irq 0x70 = 7
end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
+ device pnp 2e.2 on # Com1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
end
- device pnp 2e.3 on # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
+ device pnp 2e.3 on # Com2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
+ device pnp 2e.5 on # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
irq 0x72 = 12
end
- device pnp 2e.6 off # SFI
- io 0x62 = 0x100
+ device pnp 2e.6 off # SFI
+ io 0x62 = 0x100
end
- device pnp 2e.7 off # GPIO_GAME_MIDI
+ device pnp 2e.7 off # GPIO_GAME_MIDI
io 0x60 = 0x220
io 0x62 = 0x300
irq 0x70 = 9
- end
- device pnp 2e.8 off end # WDTO_PLED
- device pnp 2e.9 off end # GPIO_SUSLED
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
+ end
+ device pnp 2e.8 off end # WDTO_PLED
+ device pnp 2e.9 off end # GPIO_SUSLED
+ device pnp 2e.a off end # ACPI
+ device pnp 2e.b on # HW Monitor
+ io 0x60 = 0x290
irq 0x70 = 5
- end
+ end
end
end
- device pci 1.1 on # SM 0
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- chip drivers/generic/generic #dimm 1-0-0
- device i2c 54 on end
- end
- chip drivers/generic/generic #dimm 1-0-1
- device i2c 55 on end
- end
- chip drivers/generic/generic #dimm 1-1-0
- device i2c 56 on end
- end
- chip drivers/generic/generic #dimm 1-1-1
- device i2c 57 on end
- end
+ device pci 1.1 on # SM 0
+ chip drivers/generic/generic #dimm 0-0-0
+ device i2c 50 on end
+ end
+ chip drivers/generic/generic #dimm 0-0-1
+ device i2c 51 on end
+ end
+ chip drivers/generic/generic #dimm 0-1-0
+ device i2c 52 on end
+ end
+ chip drivers/generic/generic #dimm 0-1-1
+ device i2c 53 on end
+ end
+ chip drivers/generic/generic #dimm 1-0-0
+ device i2c 54 on end
+ end
+ chip drivers/generic/generic #dimm 1-0-1
+ device i2c 55 on end
+ end
+ chip drivers/generic/generic #dimm 1-1-0
+ device i2c 56 on end
+ end
+ chip drivers/generic/generic #dimm 1-1-1
+ device i2c 57 on end
+ end
end # SM
- device pci 1.1 on # SM 1
+ device pci 1.1 on # SM 1
#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus?
-# chip drivers/generic/generic #PCIXA Slot1
-# device i2c 50 on end
-# end
-# chip drivers/generic/generic #PCIXB Slot1
-# device i2c 51 on end
-# end
-# chip drivers/generic/generic #PCIXB Slot2
-# device i2c 52 on end
-# end
-# chip drivers/generic/generic #PCI Slot1
-# device i2c 53 on end
-# end
-# chip drivers/generic/generic #Master MCP55 PCI-E
-# device i2c 54 on end
-# end
-# chip drivers/generic/generic #Slave MCP55 PCI-E
-# device i2c 55 on end
-# end
- chip drivers/generic/generic #MAC EEPROM
- device i2c 51 on end
- end
-
- end # SM
- device pci 2.0 on end # USB 1.1
- device pci 2.1 on end # USB 2
- device pci 4.0 on end # IDE
- device pci 5.0 on end # SATA 0
- device pci 5.1 on end # SATA 1
- device pci 5.2 on end # SATA 2
- device pci 6.0 on
- chip drivers/pci/onboard
- device pci 4.0 on end
+# chip drivers/generic/generic #PCIXA Slot1
+# device i2c 50 on end
+# end
+# chip drivers/generic/generic #PCIXB Slot1
+# device i2c 51 on end
+# end
+# chip drivers/generic/generic #PCIXB Slot2
+# device i2c 52 on end
+# end
+# chip drivers/generic/generic #PCI Slot1
+# device i2c 53 on end
+# end
+# chip drivers/generic/generic #Master MCP55 PCI-E
+# device i2c 54 on end
+# end
+# chip drivers/generic/generic #Slave MCP55 PCI-E
+# device i2c 55 on end
+# end
+ chip drivers/generic/generic #MAC EEPROM
+ device i2c 51 on end
+ end
+
+ end # SM
+ device pci 2.0 on end # USB 1.1
+ device pci 2.1 on end # USB 2
+ device pci 4.0 on end # IDE
+ device pci 5.0 on end # SATA 0
+ device pci 5.1 on end # SATA 1
+ device pci 5.2 on end # SATA 2
+ device pci 6.0 on
+ chip drivers/pci/onboard
+ device pci 4.0 on end
register "rom_address" = "0xfff80000"
end
end # PCI
- device pci 6.1 off end # AZA
- device pci 8.0 on end # NIC
- device pci 9.0 on end # NIC
- device pci a.0 on end # PCI E 5
- device pci b.0 off end # PCI E 4
- device pci c.0 off end # PCI E 3
- device pci d.0 on end # PCI E 2
- device pci e.0 off end # PCI E 1
- device pci f.0 on end # PCI E 0
- register "ide0_enable" = "1"
- register "sata0_enable" = "1"
- register "sata1_enable" = "1"
+ device pci 6.1 off end # AZA
+ device pci 8.0 on end # NIC
+ device pci 9.0 on end # NIC
+ device pci a.0 on end # PCI E 5
+ device pci b.0 off end # PCI E 4
+ device pci c.0 off end # PCI E 3
+ device pci d.0 on end # PCI E 2
+ device pci e.0 off end # PCI E 1
+ device pci f.0 on end # PCI E 0
+ register "ide0_enable" = "1"
+ register "sata0_enable" = "1"
+ register "sata1_enable" = "1"
register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1
register "mac_eeprom_addr" = "0x51"
end
- end # device pci 18.0
+ end # device pci 18.0
device pci 18.1 on end
device pci 18.2 on end
device pci 18.3 on end
device pci 18.4 on end
end # mc0
-
+
end # PCI domain
-
-# chip drivers/generic/debug
-# device pnp 0.0 off end # chip name
-# device pnp 0.1 on end # pci_regs_all
-# device pnp 0.2 on end # mem
-# device pnp 0.3 off end # cpuid
-# device pnp 0.4 on end # smbus_regs_all
-# device pnp 0.5 off end # dual core msr
-# device pnp 0.6 off end # cache size
-# device pnp 0.7 off end # tsc
-# device pnp 0.8 off end # io
-# device pnp 0.9 off end # io
-# end
+
+# chip drivers/generic/debug
+# device pnp 0.0 off end # chip name
+# device pnp 0.1 on end # pci_regs_all
+# device pnp 0.2 on end # mem
+# device pnp 0.3 off end # cpuid
+# device pnp 0.4 on end # smbus_regs_all
+# device pnp 0.5 off end # dual core msr
+# device pnp 0.6 off end # cache size
+# device pnp 0.7 off end # tsc
+# device pnp 0.8 off end # io
+# device pnp 0.9 off end # io
+# end
end #root_complex
-##
+##
## This file is part of the coreboot project.
-##
+##
## Copyright (C) 2007 AMD
## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
-##
+##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
-##
+##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
-##
+##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
+##
uses HAVE_MP_TABLE
uses HAVE_PIRQ_TABLE
#CHIP_NAME ?
default CONFIG_CHIP_NAME=1
-#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead.
+#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead.
#2G
#default HW_MEM_HOLE_SIZEK=0x200000
#1G
###
### Defaults of options that you may want to override in the target config file
-###
+###
##
## The default compiler
##
## Disable the gdb stub by default
-##
+##
default CONFIG_GDB_STUB=0
##
##
### Select the coreboot loglevel
##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
+## EMERG 1 system is unusable
+## ALERT 2 action must be taken immediately
+## CRIT 3 critical conditions
+## ERR 4 error conditions
+## WARNING 5 warning conditions
+## NOTICE 6 normal but significant condition
+## INFO 7 informational
+## DEBUG 8 debug-level messages
+## SPEW 9 Way too many details
## Request this level of debugging output
default DEFAULT_CONSOLE_LOGLEVEL=8
#include "pc80/serial.c"
#if CONFIG_USE_INIT == 0
- #include "lib/memcpy.c"
+ #include "lib/memcpy.c"
#endif
#include "arch/i386/lib/console.c"
-#if 0
-static void post_code(uint8_t value) {
-#if 1
- int i;
- for(i=0;i<0x80000;i++) {
- outb(value, 0x80);
- }
-#endif
-}
-#endif
-
#include <cpu/amd/model_fxx_rev.h>
#include "northbridge/amd/amdk8/raminit.h"
#include "cpu/amd/model_fxx/apic_timer.c"
void hardwaremain(int ret_addr)
{
struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); // in CACHE
- struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM
+ struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM
struct node_core_id id;
id = get_node_core_id_x();
//FIXME: for USBDEBUG_DIRECT you need to make sure dbg_info get assigned in AP
- print_debug("CODE IN CACHE ON NODE:"); print_debug_hex8(id.nodeid); print_debug("\r\n");
+ print_debug("CODE IN CACHE ON NODE:"); print_debug_hex8(id.nodeid); print_debug("\r\n");
train_ram(id.nodeid, sysinfo, sysinfox);
go back, but can not use stack any more, because we only keep ret_addr and can not restore esp, and ebp
*/
- __asm__ volatile (
- "movl %0, %%edi\n\t"
- "jmp *%%edi\n\t"
- :: "a"(ret_addr)
- );
+ __asm__ volatile (
+ "movl %0, %%edi\n\t"
+ "jmp *%%edi\n\t"
+ :: "a"(ret_addr)
+ );
}
struct eregs {
- uint32_t eax, ecx, edx, ebx, esp, ebp, esi, edi;
- uint32_t vector;
- uint32_t error_code;
- uint32_t eip;
- uint32_t cs;
- uint32_t eflags;
+ uint32_t eax, ecx, edx, ebx, esp, ebp, esi, edi;
+ uint32_t vector;
+ uint32_t error_code;
+ uint32_t eip;
+ uint32_t cs;
+ uint32_t eflags;
};
void x86_exception(struct eregs *info)
{
- do {
- hlt();
- } while(1);
+ do {
+ hlt();
+ } while(1);
}
#define FAM10_SET_FIDVID_CORE_RANGE 0
#define DBGP_DEFAULT 7
-
+
#include <stdint.h>
#include <device/pci_def.h>
#include <device/pci_ids.h>
#include "pc80/mc146818rtc_early.c"
static void post_code(u8 value) {
- outb(value, 0x80);
+ outb(value, 0x80);
}
#if USE_FAILOVER_IMAGE==0
#include "cpu/x86/bist.h"
#if CONFIG_USE_INIT == 0
- #include "lib/memcpy.c"
+ #include "lib/memcpy.c"
#endif
#include "northbridge/amd/amdfam10/debug.c"
#include "northbridge/amd/amdfam10/raminit_amdmct.c"
#include "northbridge/amd/amdfam10/amdfam10_pci.c"
-#include "resourcemap.c"
+#include "resourcemap.c"
#include "cpu/amd/quadcore/quadcore.c"
#define MCP55_PCI_E_X_0 1
#define MCP55_MB_SETUP \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */
#include "southbridge/nvidia/mcp55/mcp55_early_setup_ss.h"
#include "southbridge/nvidia/mcp55/mcp55_early_setup_car.c"
static void sio_setup(void)
{
- unsigned value;
- uint32_t dword;
- uint8_t byte;
-
- byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b);
- byte |= 0x20;
- pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte);
-
- dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0);
- /*serial 0 */
- dword |= (1<<0);
- pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword);
-
- dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4);
- dword |= (1<<16);
- pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword);
+ unsigned value;
+ uint32_t dword;
+ uint8_t byte;
+
+ byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b);
+ byte |= 0x20;
+ pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte);
+
+ dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0);
+ /*serial 0 */
+ dword |= (1<<0);
+ pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword);
+
+ dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4);
+ dword |= (1<<16);
+ pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword);
}
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- set_bsp_node_CHtExtNodeCfgEn();
- enumerate_ht_chain();
-
- sio_setup();
-
- /* Setup the mcp55 */
- mcp55_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
+ unsigned last_boot_normal_x = last_boot_normal();
+
+ /* Is this a cpu only reset? or Is this a secondary cpu? */
+ if ((cpu_init_detectedx) || (!boot_cpu())) {
+ if (last_boot_normal_x) {
+ goto normal_image;
+ } else {
+ goto fallback_image;
+ }
+ }
+
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ set_bsp_node_CHtExtNodeCfgEn();
+ enumerate_ht_chain();
+
+ sio_setup();
+
+ /* Setup the mcp55 */
+ mcp55_enable_rom();
+
+ /* Is this a deliberate reset by the bios */
+ if (bios_reset_detected() && last_boot_normal_x) {
+ goto normal_image;
+ }
+ /* This is the primary cpu how should I boot? */
+ else if (do_normal_boot()) {
+ goto normal_image;
+ }
+ else {
+ goto fallback_image;
+ }
normal_image:
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
- );
+ __asm__ volatile ("jmp __normal_image"
+ : /* outputs */
+ : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
+ );
fallback_image:
#if HAVE_FAILOVER_BOOT==1
- __asm__ volatile ("jmp __fallback_image"
- : /* outputs */
- : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
- )
+ __asm__ volatile ("jmp __fallback_image"
+ : /* outputs */
+ : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
+ )
#endif
;
}
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-#if HAVE_FAILOVER_BOOT==1
+#if HAVE_FAILOVER_BOOT==1
#if USE_FAILOVER_IMAGE==1
- failover_process(bist, cpu_init_detectedx);
+ failover_process(bist, cpu_init_detectedx);
#else
real_main(bist, cpu_init_detectedx);
#endif
#else
#if USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
+ failover_process(bist, cpu_init_detectedx);
#endif
real_main(bist, cpu_init_detectedx);
#endif
void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
- struct sys_info *sysinfo = (struct sys_info *)(DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE);
+ struct sys_info *sysinfo = (struct sys_info *)(DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE);
u32 bsp_apicid = 0;
u32 val;
u32 wants_reset;
msr_t msr;
-
+
post_code(0x30);
- if (bist == 0) {
+ if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
+ }
post_code(0x32);
w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
+ uart_init();
+ console_init();
printk_debug("\n");
/* Halt if there was a built in self test failure */
printk_debug("bsp_apicid = %02x \n", bsp_apicid);
printk_debug("cpu_init_detectedx = %08x \n", cpu_init_detectedx);
-
/* Setup sysinfo defaults */
set_sysinfo_in_ram(0);
/* wait for all the APs core0 started by finalize_node_setup. */
/* FIXME: A bunch of cores are going to start output to serial at once.
- It would be nice to fixup prink spinlocks for ROM XIP mode.
- I think it could be done by putting the spinlock flag in the cache
- of the BSP located right after sysinfo.
+ * It would be nice to fixup prink spinlocks for ROM XIP mode.
+ * I think it could be done by putting the spinlock flag in the cache
+ * of the BSP located right after sysinfo.
*/
wait_all_core0_started();
printk_debug("\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);
/* FIXME: The sb fid change may survive the warm reset and only
- need to be done once.*/
+ * need to be done once.*/
enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
post_code(0x39);
}
if (wants_reset)
- printk_debug("mcp55_early_setup_x wanted additional reset!\n");
+ printk_debug("mcp55_early_setup_x wanted additional reset!\n");
post_code(0x3B);
-##
+##
## This file is part of the coreboot project.
-##
+##
## Copyright (C) 2007 AMD
## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
-##
+##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
-##
+##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
-##
+##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
+##
entries
395 1 e 1 hw_scrubber
396 1 e 1 interleave_chip_selects
397 2 e 8 max_mem_clock
-399 1 e 2 quad_core
+399 1 e 2 quad_core
400 1 e 1 power_on_after_fail
412 4 e 6 debug_level
416 4 e 7 boot_first
420 4 e 7 boot_second
424 4 e 7 boot_third
428 4 h 0 boot_index
-432 8 h 0 boot_countdown
+432 8 h 0 boot_countdown
440 4 e 9 slow_cpu
444 1 e 1 nmi
445 1 e 1 iommu
unsigned apicid_base;
struct mb_sysconf_t *m;
- device_t dev;
- int i, j;
+ device_t dev;
+ int i, j;
- if(get_bus_conf_done==1) return; //do it only once
+ if(get_bus_conf_done==1) return; //do it only once
- get_bus_conf_done = 1;
+ get_bus_conf_done = 1;
sysconf.mb = &mb_sysconf;
-
+
m = sysconf.mb;
memset(m, 0, sizeof(struct mb_sysconf_t));
- sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
- for(i=0;i<sysconf.hc_possible_num; i++) {
- sysconf.pci1234[i] = pci1234x[i];
- sysconf.hcdn[i] = hcdnx[i];
- }
+ sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
+ for(i=0;i<sysconf.hc_possible_num; i++) {
+ sysconf.pci1234[i] = pci1234x[i];
+ sysconf.hcdn[i] = hcdnx[i];
+ }
- get_pci1234();
+ get_pci1234();
m->bus_type[0] = 1; //pci
sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain
m->bus_mcp55[0] = (sysconf.pci1234[0] >> 12) & 0xff;
- /* MCP55 */
- dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x06,0));
- if (dev) {
- m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
- }
- else {
- printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06);
- }
+ /* MCP55 */
+ dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x06,0));
+ if (dev) {
+ m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ }
+ else {
+ printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06);
+ }
for(i=2; i<8;i++) {
- dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2 , 0));
- if (dev) {
- m->bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
- }
- else {
- printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 );
- }
+ dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2 , 0));
+ if (dev) {
+ m->bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ }
+ else {
+ printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 );
+ }
}
for(i=0; i< sysconf.hc_possible_num; i++) {
if(!(sysconf.pci1234[i] & 0x1) ) continue;
- unsigned busn = (sysconf.pci1234[i] >> 12) & 0xff;
- unsigned busn_max = (sysconf.pci1234[i] >> 20) & 0xff;
- for (j = busn; j <= busn_max; j++)
+ unsigned busn = (sysconf.pci1234[i] >> 12) & 0xff;
+ unsigned busn_max = (sysconf.pci1234[i] >> 20) & 0xff;
+ for (j = busn; j <= busn_max; j++)
m->bus_type[j] = 1;
- if(m->bus_isa <= busn_max)
+ if(m->bus_isa <= busn_max)
m->bus_isa = busn_max + 1;
- printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa);
+ printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa);
}
-
/*I/O APICs: APIC ID Version State Address*/
#if CONFIG_LOGICAL_CPUS==1
apicid_base = get_apicid_base(1);
-#else
- apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
+#else
+ apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
#endif
m->apicid_mcp55 = apicid_base+0;
*/
/* This file was generated by getpir.c, do not modify!
- (but if you do, please run checkpir on it to verify)
- Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
+ * (but if you do, please run checkpir on it to verify)
+ * Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
- Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
+ * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
*/
#include <console/console.h>
#include <device/pci.h>
uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3,
uint8_t slot, uint8_t rfu)
{
- pirq_info->bus = bus;
- pirq_info->devfn = devfn;
- pirq_info->irq[0].link = link0;
- pirq_info->irq[0].bitmap = bitmap0;
- pirq_info->irq[1].link = link1;
- pirq_info->irq[1].bitmap = bitmap1;
- pirq_info->irq[2].link = link2;
- pirq_info->irq[2].bitmap = bitmap2;
- pirq_info->irq[3].link = link3;
- pirq_info->irq[3].bitmap = bitmap3;
- pirq_info->slot = slot;
- pirq_info->rfu = rfu;
+ pirq_info->bus = bus;
+ pirq_info->devfn = devfn;
+ pirq_info->irq[0].link = link0;
+ pirq_info->irq[0].bitmap = bitmap0;
+ pirq_info->irq[1].link = link1;
+ pirq_info->irq[1].bitmap = bitmap1;
+ pirq_info->irq[2].link = link2;
+ pirq_info->irq[2].bitmap = bitmap2;
+ pirq_info->irq[3].link = link3;
+ pirq_info->irq[3].bitmap = bitmap3;
+ pirq_info->slot = slot;
+ pirq_info->rfu = rfu;
}
unsigned long write_pirq_routing_table(unsigned long addr)
struct mb_sysconf_t *m;
unsigned sbdn;
- uint8_t sum=0;
- int i;
+ uint8_t sum=0;
+ int i;
- get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
+ get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
sbdn = sysconf.sbdn;
m = sysconf.mb;
- /* Align the table to be 16 byte aligned. */
- addr += 15;
- addr &= ~15;
+ /* Align the table to be 16 byte aligned. */
+ addr += 15;
+ addr &= ~15;
- /* This table must be betweeen 0xf0000 & 0x100000 */
- printk_info("Writing IRQ routing tables to 0x%x...", addr);
+ /* This table must be betweeen 0xf0000 & 0x100000 */
+ printk_info("Writing IRQ routing tables to 0x%x...", addr);
pirq = (void *)(addr);
v = (uint8_t *)(addr);
//pci bridge
write_pirq_info(pirq_info, m->bus_mcp55[0], ((sbdn+6)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
pirq_info++; slot_num++;
-
- for(i=1; i< sysconf.hc_possible_num; i++) {
- if(!(sysconf.pci1234[i] & 0x1) ) continue;
- unsigned busn = (sysconf.pci1234[i] >> 12) & 0xff;
- unsigned devn = sysconf.hcdn[i] & 0xff;
-
- write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
- pirq_info++; slot_num++;
+
+ for(i=1; i< sysconf.hc_possible_num; i++) {
+ if(!(sysconf.pci1234[i] & 0x1) ) continue;
+ unsigned busn = (sysconf.pci1234[i] >> 12) & 0xff;
+ unsigned devn = sysconf.hcdn[i] & 0xff;
+
+ write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+ pirq_info++; slot_num++;
}
#if CBB
pirq->size = 32 + 16 * slot_num;
- for (i = 0; i < pirq->size; i++)
- sum += v[i];
+ for (i = 0; i < pirq->size; i++)
+ sum += v[i];
sum = pirq->checksum - sum;
- if (sum != pirq->checksum) {
- pirq->checksum = sum;
- }
+ if (sum != pirq->checksum) {
+ pirq->checksum = sum;
+ }
printk_info("done.\n");
#define MB_SYSCONF_H
struct mb_sysconf_t {
- unsigned char bus_isa;
- unsigned char bus_mcp55[8]; //1
- unsigned apicid_mcp55;
+ unsigned char bus_isa;
+ unsigned char bus_mcp55[8]; //1
+ unsigned apicid_mcp55;
unsigned bus_type[256];
};
void *smp_write_config_table(void *v)
{
- static const char sig[4] = "PCMP";
- static const char oem[8] = "TYAN ";
- static const char productid[12] = "S2895 ";
- struct mp_config_table *mc;
+ static const char sig[4] = "PCMP";
+ static const char oem[8] = "TYAN ";
+ static const char productid[12] = "S2895 ";
+ struct mp_config_table *mc;
struct mb_sysconf_t *m;
unsigned sbdn;
int i,j;
- mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
- memset(mc, 0, sizeof(*mc));
-
- memcpy(mc->mpc_signature, sig, sizeof(sig));
- mc->mpc_length = sizeof(*mc); /* initially just the header */
- mc->mpc_spec = 0x04;
- mc->mpc_checksum = 0; /* not yet computed */
- memcpy(mc->mpc_oem, oem, sizeof(oem));
- memcpy(mc->mpc_productid, productid, sizeof(productid));
- mc->mpc_oemptr = 0;
- mc->mpc_oemsize = 0;
- mc->mpc_entry_count = 0; /* No entries yet... */
- mc->mpc_lapic = LAPIC_ADDR;
- mc->mpe_length = 0;
- mc->mpe_checksum = 0;
- mc->reserved = 0;
-
- smp_write_processors(mc);
+ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+ memset(mc, 0, sizeof(*mc));
+
+ memcpy(mc->mpc_signature, sig, sizeof(sig));
+ mc->mpc_length = sizeof(*mc); /* initially just the header */
+ mc->mpc_spec = 0x04;
+ mc->mpc_checksum = 0; /* not yet computed */
+ memcpy(mc->mpc_oem, oem, sizeof(oem));
+ memcpy(mc->mpc_productid, productid, sizeof(productid));
+ mc->mpc_oemptr = 0;
+ mc->mpc_oemsize = 0;
+ mc->mpc_entry_count = 0; /* No entries yet... */
+ mc->mpc_lapic = LAPIC_ADDR;
+ mc->mpe_length = 0;
+ mc->mpe_checksum = 0;
+ mc->reserved = 0;
+
+ smp_write_processors(mc);
get_bus_conf();
sbdn = sysconf.sbdn;
m = sysconf.mb;
/*Bus: Bus ID Type*/
- /* define bus and isa numbers */
- for(j= 0; j < 256 ; j++) {
+ /* define bus and isa numbers */
+ for(j= 0; j < 256 ; j++) {
if(m->bus_type[j])
smp_write_bus(mc, j, "PCI ");
- }
- smp_write_bus(mc, m->bus_isa, "ISA ");
+ }
+ smp_write_bus(mc, m->bus_isa, "ISA ");
/*I/O APICs: APIC ID Version State Address*/
- {
- device_t dev;
+ {
+ device_t dev;
struct resource *res;
uint32_t dword;
- dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0));
- if (dev) {
+ dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0));
+ if (dev) {
res = find_resource(dev, PCI_BASE_ADDRESS_1);
if (res) {
smp_write_ioapic(mc, m->apicid_mcp55, 0x11, res->base);
}
dword = 0x43c6c643;
- pci_write_config32(dev, 0x7c, dword);
+ pci_write_config32(dev, 0x7c, dword);
- dword = 0x81001a00;
- pci_write_config32(dev, 0x80, dword);
+ dword = 0x81001a00;
+ pci_write_config32(dev, 0x80, dword);
- dword = 0xd00002d2;
- pci_write_config32(dev, 0x84, dword);
+ dword = 0xd00002d2;
+ pci_write_config32(dev, 0x84, dword);
- }
+ }
}
-
- /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
+
+ /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, m->apicid_mcp55, 0x0);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x1, m->apicid_mcp55, 0x1);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, m->apicid_mcp55, 0x2);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xe, m->apicid_mcp55, 0xe);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xf, m->apicid_mcp55, 0xf);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21
for(j=7; j>=2; j--) {
if(!m->bus_mcp55[j]) continue;
- for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[j], (0x00<<2)|i, m->apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4);
- }
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[j], (0x00<<2)|i, m->apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4);
+ }
}
- for(j=0; j<1; j++)
- for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[1], ((0x04+j)<<2)|i, m->apicid_mcp55, 0x10 + (2+i+j)%4);
- }
+ for(j=0; j<1; j++)
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[1], ((0x04+j)<<2)|i, m->apicid_mcp55, 0x10 + (2+i+j)%4);
+ }
/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/
smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, MP_APIC_ALL, 0x0);
* 1 = base/limit registers i are read-only
* [ 7: 4] Reserved
* [31: 8] Memory-Mapped I/O Base Address i (39-16)
- * This field defines the upper address bits of a 40bit address
+ * This field defines the upper address bits of a 40bit address
* that defines the start of memory-mapped I/O region i
*/
PCI_ADDR(CBB, CDB, 1, 0x80), 0x000000f0, 0x00000000,
* [ 3: 2] Reserved
* [ 4: 4] VGA Enable
* 0 = VGA matches Disabled
- * 1 = matches all address < 64K and where A[9:0] is in the
+ * 1 = matches all address < 64K and where A[9:0] is in the
* range 3B0-3BB or 3C0-3DF independen of the base & limit registers
* [ 5: 5] ISA Enable
* 0 = ISA matches Disabled
* from matching agains this base/limit pair
* [11: 6] Reserved
* [24:12] PCI I/O Base i
- * This field defines the start of PCI I/O region n
+ * This field defines the start of PCI I/O region n
* [31:25] Reserved
*/
// PCI_ADDR(CBB, CDB, 1, 0xC0), 0xFE000FCC, 0x00000033,
// PCI_ADDR(CBB, CDB, 1, 0xE0), 0x0000FC88, 0x3f000003, /* link 0 of cpu 0 --> Nvidia MCP55 Pro */
// PCI_ADDR(CBB, CDB, 1, 0xE4), 0x0000FC88, 0x7f400203, /* link 2 of cpu 0 --> nvidia io55 */
PCI_ADDR(CBB, CDB, 1, 0xE8), 0x0000FC88, 0x00000000,
- PCI_ADDR(CBB, CDB, 1, 0xEC), 0x0000FC88, 0x00000000,
+ PCI_ADDR(CBB, CDB, 1, 0xEC), 0x0000FC88, 0x00000000,
};
projects / coreboot.git / commitdiff