--- /dev/null
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2008 Advanced Micro Devices, Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+##
+##
+
+
+##
+## Compute the location and size of where this firmware image
+## (coreboot plus bootloader) will live in the boot rom chip.
+##
+if USE_FALLBACK_IMAGE
+ default ROM_SECTION_SIZE = FALLBACK_SIZE
+ default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
+else
+ default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
+ default ROM_SECTION_OFFSET = 0
+end
+
+##
+## Compute the start location and size size of
+## The coreboot bootloader.
+##
+default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
+default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+
+##
+## Compute where this copy of coreboot will start in the boot rom
+##
+default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
+
+##
+## Compute a range of ROM that can cached to speed up coreboot,
+## execution speed.
+##
+## XIP_ROM_SIZE must be a power of 2.
+## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
+##
+default XIP_ROM_SIZE=65536
+default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
+
+arch i386 end
+
+##
+## Build the objects we have code for in this directory.
+##
+
+driver mainboard.o
+
+#dir /drivers/si/3114
+
+if HAVE_MP_TABLE object mptable.o end
+if HAVE_PIRQ_TABLE
+ object get_bus_conf.o
+ object irq_tables.o
+end
+
+#object reset.o
+
+if USE_DCACHE_RAM
+
+ if CONFIG_USE_INIT
+
+ makerule ./cache_as_ram_auto.o
+ depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
+ action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
+ end
+
+ else
+
+ makerule ./cache_as_ram_auto.inc
+ depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
+ action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
+ action "perl -e 's/.rodata/.rom.data/g' -pi $@"
+ action "perl -e 's/.text/.section .rom.text/g' -pi $@"
+ end
+
+ end
+
+end
+##
+## Build our 16 bit and 32 bit coreboot entry code
+##
+mainboardinit cpu/x86/16bit/entry16.inc
+mainboardinit cpu/x86/32bit/entry32.inc
+ldscript /cpu/x86/16bit/entry16.lds
+if USE_DCACHE_RAM
+ if CONFIG_USE_INIT
+ ldscript /cpu/x86/32bit/entry32.lds
+ end
+
+ if CONFIG_USE_INIT
+ ldscript /cpu/amd/car/cache_as_ram.lds
+ end
+end
+
+##
+## Build our reset vector (This is where coreboot is entered)
+##
+if USE_FALLBACK_IMAGE
+ mainboardinit cpu/x86/16bit/reset16.inc
+ ldscript /cpu/x86/16bit/reset16.lds
+else
+ mainboardinit cpu/x86/32bit/reset32.inc
+ ldscript /cpu/x86/32bit/reset32.lds
+end
+
+##
+## Include an id string (For safe flashing)
+##
+mainboardinit arch/i386/lib/id.inc
+ldscript /arch/i386/lib/id.lds
+
+if USE_DCACHE_RAM
+ ##
+ ## Setup Cache-As-Ram
+ ##
+ mainboardinit cpu/amd/car/cache_as_ram.inc
+end
+
+###
+### This is the early phase of coreboot startup
+### Things are delicate and we test to see if we should
+### failover to another image.
+###
+if USE_FALLBACK_IMAGE
+ if USE_DCACHE_RAM
+ ldscript /arch/i386/lib/failover.lds
+ else
+ ldscript /arch/i386/lib/failover.lds
+ mainboardinit ./failover.inc
+ end
+end
+
+###
+### O.k. We aren't just an intermediary anymore!
+###
+
+##
+## Setup RAM
+##
+if USE_DCACHE_RAM
+
+ if CONFIG_USE_INIT
+ initobject cache_as_ram_auto.o
+ else
+ mainboardinit ./cache_as_ram_auto.inc
+ end
+
+end
+
+##
+## Include the secondary Configuration files
+##
+if CONFIG_CHIP_NAME
+ config chip.h
+end
+
+#The variables belong to mainboard are defined here.
+#Define system_memory_size, the total memory on mainboard.
+
+#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default)
+#Define vga_rom_address = 0xfff0000
+#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7)
+#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3,
+# 1: the system allows a PCIE link to be established on Dev2 or Dev3.
+#Define gfx_dual_slot, 0: single slot, 1: dual slot
+#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable
+#Define gfx_tmds, 0: didn't support TMDS, 1: support
+#Define gfx_compliance, 0: didn't support compliance, 1: support
+#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration
+#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16
+chip northbridge/amd/amdk8/root_complex
+ device apic_cluster 0 on
+ chip cpu/amd/socket_S1G1
+ device apic 0 on end
+ end
+ end
+ device pci_domain 0 on
+ chip northbridge/amd/amdk8
+ device pci 18.0 on # southbridge
+ chip southbridge/amd/rs690
+ device pci 0.0 on end # HT 0x7910
+ device pci 1.0 on # Internal Graphics P2P bridge 0x7912
+ chip drivers/pci/onboard
+ device pci 5.0 on end # Internal Graphics 0x791F
+ register "rom_address" = "0xfff00000"
+ end
+ end
+ device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913
+ device pci 3.0 off end # PCIE P2P bridge 0x791b
+ device pci 4.0 on end # PCIE P2P bridge 0x1914
+ device pci 5.0 on end # PCIE P2P bridge 0x7915
+ device pci 6.0 on end # PCIE P2P bridge 0x7916
+ device pci 7.0 on end # PCIE P2P bridge 0x7917
+ device pci 8.0 off end # NB/SB Link P2P bridge
+ register "vga_rom_address" = "0xfff00000"
+ register "gpp_configuration" = "4"
+ register "port_enable" = "0xfc"
+ register "gfx_dev2_dev3" = "1"
+ register "gfx_dual_slot" = "0"
+ register "gfx_lane_reversal" = "0"
+ register "gfx_tmds" = "0"
+ register "gfx_compliance" = "0"
+ register "gfx_reconfiguration" = "1"
+ register "gfx_link_width" = "0"
+ end
+ chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus
+ device pci 12.0 on end # SATA 0x4380
+ device pci 13.0 on end # USB 0x4387
+ device pci 13.1 on end # USB 0x4388
+ device pci 13.2 on end # USB 0x4389
+ device pci 13.3 on end # USB 0x438a
+ device pci 13.4 on end # USB 0x438b
+ device pci 13.5 on end # USB 2 0x4386
+ device pci 14.0 on # SM 0x4385
+ chip drivers/generic/generic #dimm 0-0-0
+ device i2c 50 on end
+ end
+ chip drivers/generic/generic #dimm 0-0-1
+ device i2c 51 on end
+ end
+ chip drivers/generic/generic #dimm 0-1-0
+ device i2c 52 on end
+ end
+ chip drivers/generic/generic #dimm 0-1-1
+ device i2c 53 on end
+ end
+ end # SM
+ device pci 14.1 on end # IDE 0x438c
+ device pci 14.2 on end # HDA 0x4383
+ device pci 14.3 on # LPC 0x438d
+ chip superio/ite/it8712f
+ device pnp 2e.0 off # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 2e.1 on # Com1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.2 off # Com2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.3 off # Parallel Port
+ io 0x60 = 0x378
+ irq 0x70 = 7
+ end
+ device pnp 2e.4 off end # EC
+ device pnp 2e.5 on # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ end
+ device pnp 2e.6 on # Mouse
+ irq 0x70 = 12
+ end
+ device pnp 2e.8 off # MIDI
+ io 0x60 = 0x300
+ irq 0x70 = 9
+ end
+ device pnp 2e.9 off # GAME
+ io 0x60 = 0x220
+ end
+ device pnp 2e.a off end # CIR
+ end #superio/ite/it8712f
+ end #LPC
+ device pci 14.4 on end # PCI 0x4384
+ device pci 14.5 on end # ACI 0x4382
+ device pci 14.6 on end # MCI 0x438e
+ register "ide0_enable" = "1"
+ register "sata0_enable" = "1"
+ register "hda_viddid" = "0x10ec0882"
+ end #southbridge/amd/sb600
+ end # device pci 18.0
+
+ device pci 18.0 on end
+ device pci 18.0 on end
+ device pci 18.1 on end
+ device pci 18.2 on end
+ device pci 18.3 on end
+ end #northbridge/amd/amdk8
+ end #pci_domain
+end #northbridge/amd/amdk8/root_complex
+
--- /dev/null
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2008 Advanced Micro Devices, Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+##
+##
+
+uses HAVE_MP_TABLE
+uses HAVE_PIRQ_TABLE
+uses HAVE_ACPI_TABLES
+uses USE_FALLBACK_IMAGE
+uses HAVE_FALLBACK_BOOT
+uses HAVE_HARD_RESET
+uses IRQ_SLOT_COUNT
+uses HAVE_OPTION_TABLE
+uses CONFIG_MAX_CPUS
+uses CONFIG_MAX_PHYSICAL_CPUS
+uses CONFIG_LOGICAL_CPUS
+uses CONFIG_IOAPIC
+uses CONFIG_SMP
+uses FALLBACK_SIZE
+uses ROM_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_IMAGE_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_SECTION_OFFSET
+uses CONFIG_ROM_PAYLOAD
+uses CONFIG_ROM_PAYLOAD_START
+uses CONFIG_COMPRESSED_PAYLOAD_LZMA
+uses PAYLOAD_SIZE
+uses _ROMBASE
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+uses STACK_SIZE
+uses HEAP_SIZE
+uses USE_OPTION_TABLE
+uses LB_CKS_RANGE_START
+uses LB_CKS_RANGE_END
+uses LB_CKS_LOC
+uses MAINBOARD_PART_NUMBER
+uses MAINBOARD_VENDOR
+uses MAINBOARD
+uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
+uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+uses COREBOOT_EXTRA_VERSION
+uses _RAMBASE
+uses TTYS0_BAUD
+uses TTYS0_BASE
+uses TTYS0_LCS
+uses DEFAULT_CONSOLE_LOGLEVEL
+uses MAXIMUM_CONSOLE_LOGLEVEL
+uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+uses CONFIG_CONSOLE_SERIAL8250
+uses HAVE_INIT_TIMER
+uses CONFIG_GDB_STUB
+uses CONFIG_GDB_STUB
+uses CROSS_COMPILE
+uses CC
+uses HOSTCC
+uses OBJCOPY
+uses CONFIG_CHIP_NAME
+uses CONFIG_CONSOLE_VGA
+uses CONFIG_PCI_ROM_RUN
+uses HW_MEM_HOLE_SIZEK
+uses HT_CHAIN_UNITID_BASE
+uses HT_CHAIN_END_UNITID_BASE
+uses SB_HT_CHAIN_ON_BUS0
+
+uses USE_DCACHE_RAM
+uses DCACHE_RAM_BASE
+uses DCACHE_RAM_SIZE
+uses DCACHE_RAM_GLOBAL_VAR_SIZE
+uses CONFIG_USE_INIT
+
+uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
+uses CONFIG_USE_PRINTK_IN_CAR
+
+uses CONFIG_VIDEO_MB
+uses CONFIG_GFXUMA
+
+###
+### Build options
+###
+
+##
+## ROM_SIZE is the size of boot ROM that this board will use.
+##
+default ROM_SIZE=524288
+
+##
+## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
+##
+#default FALLBACK_SIZE=131072
+#256K
+default FALLBACK_SIZE=0x40000
+
+##
+## Build code for the fallback boot
+##
+default HAVE_FALLBACK_BOOT=1
+
+##
+## Build code to reset the motherboard from coreboot
+##
+default HAVE_HARD_RESET=1
+
+##
+## Build code to export a programmable irq routing table
+##
+default HAVE_PIRQ_TABLE=1
+default IRQ_SLOT_COUNT=11
+
+##
+## Build code to export an x86 MP table
+## Useful for specifying IRQ routing values
+##
+default HAVE_MP_TABLE=1
+
+##
+## Build code to export a CMOS option table
+##
+default HAVE_OPTION_TABLE=0
+
+##
+## Move the default coreboot cmos range off of AMD RTC registers
+##
+default LB_CKS_RANGE_START=49
+default LB_CKS_RANGE_END=122
+default LB_CKS_LOC=123
+
+##
+## Build code for SMP support
+## Only worry about 2 micro processors
+##
+default CONFIG_SMP=1
+default CONFIG_MAX_CPUS=2
+
+default CONFIG_MAX_PHYSICAL_CPUS=1
+default CONFIG_LOGICAL_CPUS=1
+
+#CHIP_NAME ?
+default CONFIG_CHIP_NAME=1
+
+#1G memory hole
+default HW_MEM_HOLE_SIZEK=0x100000
+
+#VGA Console
+default CONFIG_CONSOLE_VGA=1
+default CONFIG_PCI_ROM_RUN=1
+
+# BTDC: Only one HT device on Herring.
+#HT Unit ID offset
+#default HT_CHAIN_UNITID_BASE=0x6
+default HT_CHAIN_UNITID_BASE=0x0
+
+
+#real SB Unit ID
+default HT_CHAIN_END_UNITID_BASE=0x1
+
+#make the SB HT chain on bus 0
+default SB_HT_CHAIN_ON_BUS0=1
+
+##
+## enable CACHE_AS_RAM specifics
+##
+default USE_DCACHE_RAM=1
+default DCACHE_RAM_BASE=0xc8000
+default DCACHE_RAM_SIZE=0x8000
+default DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
+default CONFIG_USE_INIT=0
+
+##
+## Build code to setup a generic IOAPIC
+##
+default CONFIG_IOAPIC=1
+
+##
+## Clean up the motherboard id strings
+##
+default MAINBOARD_PART_NUMBER="dbm690t"
+default MAINBOARD_VENDOR="amd"
+default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022
+default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3050
+
+
+###
+### coreboot layout values
+###
+
+## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
+default ROM_IMAGE_SIZE = 65536
+
+##
+## Use a small 8K stack
+##
+default STACK_SIZE=0x2000
+
+##
+## Use a small 16K heap
+##
+default HEAP_SIZE=0x4000
+
+##
+## Only use the option table in a normal image
+##
+#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
+default USE_OPTION_TABLE = 0
+
+##
+## coreboot C code runs at this location in RAM
+##
+default _RAMBASE=0x00004000
+
+##
+## Load the payload from the ROM
+##
+default CONFIG_ROM_PAYLOAD = 1
+
+###
+### Defaults of options that you may want to override in the target config file
+###
+
+##
+## The default compiler
+##
+default CC="$(CROSS_COMPILE)gcc -m32"
+default HOSTCC="gcc"
+
+##
+## Disable the gdb stub by default
+##
+default CONFIG_GDB_STUB=0
+
+
+default CONFIG_USE_PRINTK_IN_CAR=1
+
+##
+## The Serial Console
+##
+
+# To Enable the Serial Console
+default CONFIG_CONSOLE_SERIAL8250=1
+
+## Select the serial console baud rate
+default TTYS0_BAUD=115200
+#default TTYS0_BAUD=57600
+#default TTYS0_BAUD=38400
+#default TTYS0_BAUD=19200
+#default TTYS0_BAUD=9600
+#default TTYS0_BAUD=4800
+#default TTYS0_BAUD=2400
+#default TTYS0_BAUD=1200
+
+# Select the serial console base port
+default TTYS0_BASE=0x3f8
+
+# Select the serial protocol
+# This defaults to 8 data bits, 1 stop bit, and no parity
+default TTYS0_LCS=0x3
+
+##
+### Select the coreboot loglevel
+##
+## EMERG 1 system is unusable
+## ALERT 2 action must be taken immediately
+## CRIT 3 critical conditions
+## ERR 4 error conditions
+## WARNING 5 warning conditions
+## NOTICE 6 normal but significant condition
+## INFO 7 informational
+## DEBUG 8 debug-level messages
+## SPEW 9 Way too many details
+
+## Request this level of debugging output
+default DEFAULT_CONSOLE_LOGLEVEL=8
+## At a maximum only compile in this level of debugging
+default MAXIMUM_CONSOLE_LOGLEVEL=8
+
+##
+## Select power on after power fail setting
+default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
+
+default CONFIG_VIDEO_MB=1
+default CONFIG_GFXUMA=1
+
+### End Options.lb
+end
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#define ASSEMBLY 1
+#define __ROMCC__
+
+#define RAMINIT_SYSINFO 1
+#define K8_SET_FIDVID 1
+#define QRANK_DIMM_SUPPORT 1
+#if CONFIG_LOGICAL_CPUS==1
+#define SET_NB_CFG_54 1
+#endif
+
+#define RC0 (6<<8)
+#define RC1 (7<<8)
+
+#define DIMM0 0x50
+#define DIMM1 0x51
+
+#define ICS951462_ADDRESS 0x69
+#define SMBUS_HUB 0x71
+
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <cpu/x86/lapic.h>
+#include "option_table.h"
+#include "pc80/mc146818rtc_early.c"
+#include "pc80/serial.c"
+#include "arch/i386/lib/console.c"
+
+#define post_code(x) outb(x, 0x80)
+
+#include <cpu/amd/model_fxx_rev.h>
+#include "northbridge/amd/amdk8/raminit.h"
+#include "cpu/amd/model_fxx/apic_timer.c"
+#include "lib/delay.c"
+
+#if CONFIG_USE_INIT == 0
+#include "lib/memcpy.c"
+#endif
+
+#include "cpu/x86/lapic/boot_cpu.c"
+#include "northbridge/amd/amdk8/reset_test.c"
+#include "northbridge/amd/amdk8/debug.c"
+#include "superio/ite/it8712f/it8712f_early_serial.c"
+
+#include "cpu/amd/mtrr/amd_earlymtrr.c"
+#include "cpu/x86/bist.h"
+
+#include "northbridge/amd/amdk8/setup_resource_map.c"
+
+#include "southbridge/amd/rs690/rs690_early_setup.c"
+#include "southbridge/amd/sb600/sb600_early_setup.c"
+
+/* CAN'T BE REMOVED! crt0.S will use it. I don't know WHY!*/
+static void memreset(int controllers, const struct mem_controller *ctrl)
+{
+}
+
+/* called in raminit_f.c */
+static inline void activate_spd_rom(const struct mem_controller *ctrl)
+{
+}
+
+/*called in raminit_f.c */
+static inline int spd_read_byte(u32 device, u32 address)
+{
+ return smbus_read_byte(device, address);
+}
+
+#include "northbridge/amd/amdk8/amdk8.h"
+#include "northbridge/amd/amdk8/incoherent_ht.c"
+#include "northbridge/amd/amdk8/raminit.c"
+#include "northbridge/amd/amdk8/coherent_ht.c"
+#include "sdram/generic_sdram.c"
+#include "resourcemap.c"
+
+#include "cpu/amd/dualcore/dualcore.c"
+
+#include "cpu/amd/car/copy_and_run.c"
+#include "cpu/amd/car/post_cache_as_ram.c"
+
+#include "cpu/amd/model_fxx/init_cpus.c"
+
+#include "cpu/amd/model_fxx/fidvid.c"
+
+#if USE_FALLBACK_IMAGE == 1
+
+#include "northbridge/amd/amdk8/early_ht.c"
+
+void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+ /* Is this a cpu only reset? Is this a secondary cpu? */
+ if ((cpu_init_detectedx) || (!boot_cpu())) {
+ if (last_boot_normal()) { /* RTC already inited */
+ goto normal_image;
+ } else {
+ goto fallback_image;
+ }
+ }
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+ enumerate_ht_chain();
+
+ /* sb600_lpc_port80(); */
+ sb600_pci_port80();
+
+ /* Is this a deliberate reset by the bios */
+ if (bios_reset_detected() && last_boot_normal()) {
+ goto normal_image;
+ }
+ /* This is the primary cpu how should I boot? */
+ else if (do_normal_boot()) {
+ goto normal_image;
+ } else {
+ goto fallback_image;
+ }
+normal_image:
+ post_code(0x23);
+ __asm__ volatile ("jmp __normal_image": /* outputs */
+ :"a" (bist), "b"(cpu_init_detectedx) /* inputs */);
+
+fallback_image:
+ post_code(0x25);
+}
+#endif /* USE_FALLBACK_IMAGE == 1 */
+
+void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
+
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+
+#if USE_FALLBACK_IMAGE == 1
+ failover_process(bist, cpu_init_detectedx);
+#endif
+ real_main(bist, cpu_init_detectedx);
+}
+
+void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+ static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, };
+ int needs_reset = 0;
+ u32 bsp_apicid = 0;
+ msr_t msr;
+ struct sys_info *sysinfo = (struct sys_info *)(DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE);
+
+ if (bist == 0) {
+ bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
+ }
+
+ enable_rs690_dev8();
+ sb600_lpc_init();
+
+ /* it8712f_enable_serial does not use its 1st parameter. */
+ it8712f_enable_serial(0, TTYS0_BASE);
+ uart_init();
+ console_init();
+
+ /* Halt if there was a built in self test failure */
+ report_bist_failure(bist);
+ printk_debug("bsp_apicid=0x%x\n", bsp_apicid);
+
+ setup_dbm690t_resource_map();
+
+ setup_coherent_ht_domain();
+
+#if CONFIG_LOGICAL_CPUS==1
+ /* It is said that we should start core1 after all core0 launched */
+ wait_all_core0_started();
+ start_other_cores();
+#endif
+ wait_all_aps_started(bsp_apicid);
+
+ ht_setup_chains_x(sysinfo);
+
+ /* run _early_setup before soft-reset. */
+ rs690_early_setup();
+ sb600_early_setup();
+
+ msr=rdmsr(0xc0010042);
+ printk_debug("begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
+
+ enable_fid_change();
+ enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
+ init_fidvid_bsp(bsp_apicid);
+
+ // show final fid and vid
+ msr=rdmsr(0xc0010042);
+ printk_debug("end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
+
+ needs_reset = optimize_link_coherent_ht();
+ needs_reset |= optimize_link_incoherent_ht(sysinfo);
+ printk_debug("needs_reset=0x%x\n", needs_reset);
+
+
+ if (needs_reset) {
+ print_info("ht reset -\r\n");
+ soft_reset();
+ }
+
+ allow_all_aps_stop(bsp_apicid);
+
+ /* It's the time to set ctrl now; */
+ printk_debug("sysinfo->nodes: %2x sysinfo->ctrl: %2x spd_addr: %2x\n",
+ sysinfo->nodes, sysinfo->ctrl, spd_addr);
+ fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
+ sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
+
+ rs690_before_pci_init();
+ sb600_before_pci_init();
+
+ post_cache_as_ram();
+}
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+extern struct chip_operations mainboard_amd_dbm690t_ops;
+
+struct mainboard_amd_dbm690t_config
+{
+ unsigned long uma_size; /* How many UMA should be used in memory for TOP. */
+};
+
--- /dev/null
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2008 Advanced Micro Devices, Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+##
+##
+
+entries
+
+#start-bit length config config-ID name
+#0 8 r 0 seconds
+#8 8 r 0 alarm_seconds
+#16 8 r 0 minutes
+#24 8 r 0 alarm_minutes
+#32 8 r 0 hours
+#40 8 r 0 alarm_hours
+#48 8 r 0 day_of_week
+#56 8 r 0 day_of_month
+#64 8 r 0 month
+#72 8 r 0 year
+#80 4 r 0 rate_select
+#84 3 r 0 REF_Clock
+#87 1 r 0 UIP
+#88 1 r 0 auto_switch_DST
+#89 1 r 0 24_hour_mode
+#90 1 r 0 binary_values_enable
+#91 1 r 0 square-wave_out_enable
+#92 1 r 0 update_finished_enable
+#93 1 r 0 alarm_interrupt_enable
+#94 1 r 0 periodic_interrupt_enable
+#95 1 r 0 disable_clock_updates
+#96 288 r 0 temporary_filler
+0 384 r 0 reserved_memory
+384 1 e 4 boot_option
+385 1 e 4 last_boot
+386 1 e 1 ECC_memory
+388 4 r 0 reboot_bits
+392 3 e 5 baud_rate
+395 1 e 1 hw_scrubber
+396 1 e 1 interleave_chip_selects
+397 2 e 8 max_mem_clock
+399 1 e 2 dual_core
+400 1 e 1 power_on_after_fail
+412 4 e 6 debug_level
+416 4 e 7 boot_first
+420 4 e 7 boot_second
+424 4 e 7 boot_third
+428 4 h 0 boot_index
+432 8 h 0 boot_countdown
+440 4 e 9 slow_cpu
+444 1 e 1 nmi
+445 1 e 1 iommu
+728 256 h 0 user_data
+984 16 h 0 check_sum
+# Reserve the extended AMD configuration registers
+1000 24 r 0 reserved_memory
+
+
+
+enumerations
+
+#ID value text
+1 0 Disable
+1 1 Enable
+2 0 Enable
+2 1 Disable
+4 0 Fallback
+4 1 Normal
+5 0 115200
+5 1 57600
+5 2 38400
+5 3 19200
+5 4 9600
+5 5 4800
+5 6 2400
+5 7 1200
+6 6 Notice
+6 7 Info
+6 8 Debug
+6 9 Spew
+7 0 Network
+7 1 HDD
+7 2 Floppy
+7 8 Fallback_Network
+7 9 Fallback_HDD
+7 10 Fallback_Floppy
+#7 3 ROM
+8 0 DDR400
+8 1 DDR333
+8 2 DDR266
+8 3 DDR200
+9 0 off
+9 1 87.5%
+9 2 75.0%
+9 3 62.5%
+9 4 50.0%
+9 5 37.5%
+9 6 25.0%
+9 7 12.5%
+
+checksums
+
+checksum 392 983 984
+
+
--- /dev/null
+/*\r
+ * This file is part of the coreboot project.\r
+ *\r
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.\r
+ *\r
+ * This program is free software; you can redistribute it and/or modify\r
+ * it under the terms of the GNU General Public License as published by\r
+ * the Free Software Foundation; version 2 of the License.\r
+ *\r
+ * This program is distributed in the hope that it will be useful,\r
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of\r
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\r
+ * GNU General Public License for more details.\r
+ *\r
+ * You should have received a copy of the GNU General Public License\r
+ * along with this program; if not, write to the Free Software\r
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA\r
+ */\r
+#include <string.h>\r
+#include <console/console.h>\r
+#include <arch/acpi.h>\r
+\r
+\r
+\r
+/**\r
+ * Create the Fixed ACPI Description Tables (FADT) for this board.\r
+ The FADT defines various fixed hardware ACPI information vital to an ACPI-compatible\r
+ OS, such as the base address for the following hardware registers blocks:\r
+ PM1a_EVT_BLK, PM1b_EVT_BLK, PM1a_CNT_BLK, PM1b_CNT_BLK,\r
+ PM2_CNT_BLK, PM_TMR_BLK, GPE0_BLK and GPE1_BLK.\r
+ The FADT also has a pointer to the DSDT that contains the Differentiated Definition Block,\r
+ which in turn provides variable information to an ACPI-compatible OS concerning the base\r
+ system design.\r
+\r
+ Not all blocks are necessary usualy only PM1a, PMTMR and GPE0 are used.\r
+ */\r
+void acpi_create_fadt(acpi_fadt_t *fadt, acpi_facs_t *facs, void *dsdt)\r
+{\r
+ acpi_header_t *header=&(fadt->header);\r
+ \r
+ printk_debug("pm_base: 0x%04x\n", pm_base);\r
+ \r
+ memset((void *)fadt,0,sizeof(acpi_fadt_t));\r
+\r
+ /* Prepare the header */\r
+ memcpy(header->signature,"FACP",4);\r
+ header->length = 244;\r
+ header->revision = 1;\r
+ memcpy(header->oem_id,OEM_ID,6);\r
+ memcpy(header->oem_table_id,"LXBACPI ",8);\r
+ memcpy(header->asl_compiler_id,ASLC,4);\r
+ header->asl_compiler_revision=0;\r
+\r
+ \r
+ fadt->firmware_ctrl=(u32)facs;\r
+ fadt->dsdt= (u32)dsdt;\r
+\r
+ /*\r
+ 0: unspecified\r
+ 1: desktop\r
+ 2: mobile\r
+ 3: workstation\r
+ 4: enterprise server\r
+ */\r
+ fadt->preferred_pm_profile=0x01;\r
+\r
+ /*\r
+ System vector the SCI interrupt is wired to in 8259 mode. \r
+ On systems that do not contain the 8259, this field contains the Global\r
+ System interrupt number of the SCI interrupt. OSPM is required to treat\r
+ the ACPI SCI interrupt as a sharable, level, active low interrupt.\r
+ SB600 BDG 4.1\r
+ */\r
+ fadt->sci_int=4;\r
+\r
+ /*\r
+ System port address of the SMI Command Port. During ACPI OS initialization,\r
+ OSPM can determine that the ACPI hardware registers are owned by SMI (by way\r
+ of the SCI_EN bit), in which case the ACPI OS issues the ACPI_ENABLE command\r
+ to the SMI_CMD port. The SCI_EN bit effectively tracks the ownership of the\r
+ ACPI hardware registers. OSPM issues commands to the SMI_CMD port\r
+ synchronously from the boot processor.\r
+ This filed is reserved and must be zero on system that does not support\r
+ System Management mode.\r
+ */\r
+ fadt->smi_cmd = 0;\r
+\r
+ /*Those two fields are reserved and must be zero on systems that do not\r
+ support Legacy Mode.*/\r
+ fadt->acpi_enable = 0;\r
+ fadt->acpi_disable = 0;\r
+ \r
+ fadt->s4bios_req = 0x0;\r
+ fadt->pstate_cnt = 0x0;\r
+ \r
+}\r
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <string.h>
+#include <stdint.h>
+#if CONFIG_LOGICAL_CPUS==1
+#include <cpu/amd/dualcore.h>
+#endif
+
+#include <cpu/amd/amdk8_sysconf.h>
+
+/* Global variables for MB layouts and these will be shared by irqtable mptable
+* and acpi_tables busnum is default.
+*/
+u8 bus_isa;
+u8 bus_rs690[8];
+u8 bus_sb600[2];
+unsigned long apicid_sb600;
+
+/*
+* Here you only need to set value in pci1234 for HT-IO that could be installed or not
+* You may need to preset pci1234 for HTIO board,
+* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
+*/
+unsigned long pci1234x[] = {
+ 0x0000ff0,
+};
+
+/*
+* HT Chain device num, actually it is unit id base of every ht device in chain,
+* assume every chain only have 4 ht device at most
+*/
+unsigned long hcdnx[] = {
+ 0x20202020,
+};
+
+unsigned long bus_type[256];
+
+unsigned long sbdn_rs690;
+unsigned long sbdn_sb600;
+
+extern void get_sblk_pci1234(void);
+
+static unsigned long get_bus_conf_done = 0;
+
+void get_bus_conf(void)
+{
+ unsigned long apicid_base;
+ device_t dev;
+ int i, j;
+
+ if (get_bus_conf_done == 1)
+ return; /* do it only once */
+ get_bus_conf_done = 1;
+
+ sysconf.hc_possible_num = sizeof(pci1234x) / sizeof(pci1234x[0]);
+ for (i = 0; i < sysconf.hc_possible_num; i++) {
+ sysconf.pci1234[i] = pci1234x[i];
+ sysconf.hcdn[i] = hcdnx[i];
+ }
+
+ get_sblk_pci1234();
+
+ sysconf.sbdn = (sysconf.hcdn[0] & 0xff);
+ sbdn_rs690 = sysconf.sbdn;
+ sbdn_sb600 = 0;
+
+ for (i = 0; i < 2; i++) {
+ bus_sb600[i] = 0;
+ }
+ for (i = 0; i < 8; i++) {
+ bus_rs690[i] = 0;
+ }
+
+ for (i = 0; i < 256; i++) {
+ bus_type[i] = 0; /* default ISA bus. */
+ }
+
+ bus_type[0] = 1; /* pci */
+
+ bus_rs690[0] = (sysconf.pci1234[0] >> 16) & 0xff;
+ bus_sb600[0] = bus_rs690[0];
+
+ bus_type[bus_rs690[0]] = 1;
+
+ /* sb600 */
+ dev = dev_find_slot(bus_sb600[0], PCI_DEVFN(sbdn_sb600 + 0x14, 4));
+ if (dev) {
+ bus_sb600[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_isa++;
+ for (j = bus_sb600[1]; j < bus_isa; j++)
+ bus_type[j] = 1;
+ }
+
+ /* rs690 */
+ for (i = 1; i < 8; i++) {
+ dev = dev_find_slot(bus_rs690[0], PCI_DEVFN(sbdn_rs690 + i, 0));
+ if (dev) {
+ bus_rs690[i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ if(255 != bus_rs690[i]) {
+ bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_isa++;
+ bus_type[bus_rs690[i]] = 1; /* PCI bus. */
+ }
+ }
+ }
+
+ /* I/O APICs: APIC ID Version State Address */
+ bus_isa = 10;
+#if CONFIG_LOGICAL_CPUS==1
+ apicid_base = get_apicid_base(1);
+#else
+ apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
+#endif
+ apicid_sb600 = apicid_base + 0;
+}
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* This file was generated by getpir.c, do not modify!
+ (but if you do, please run checkpir on it to verify)
+ Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
+
+ Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
+*/
+#include <console/console.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+#include <arch/pirq_routing.h>
+
+#include <cpu/amd/amdk8_sysconf.h>
+
+extern void get_bus_conf(void);
+
+static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn,
+ u8 link0, u16 bitmap0, u8 link1, u16 bitmap1,
+ u8 link2, u16 bitmap2, u8 link3, u16 bitmap3,
+ u8 slot, u8 rfu)
+{
+ pirq_info->bus = bus;
+ pirq_info->devfn = devfn;
+ pirq_info->irq[0].link = link0;
+ pirq_info->irq[0].bitmap = bitmap0;
+ pirq_info->irq[1].link = link1;
+ pirq_info->irq[1].bitmap = bitmap1;
+ pirq_info->irq[2].link = link2;
+ pirq_info->irq[2].bitmap = bitmap2;
+ pirq_info->irq[3].link = link3;
+ pirq_info->irq[3].bitmap = bitmap3;
+ pirq_info->slot = slot;
+ pirq_info->rfu = rfu;
+}
+extern u8 bus_isa;
+extern u8 bus_rs690[8];
+extern u8 bus_sb600[2];
+extern unsigned long sbdn_sb600;
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+ struct irq_routing_table *pirq;
+ struct irq_info *pirq_info;
+ u32 slot_num;
+ u8 *v;
+
+ u8 sum = 0;
+ int i;
+
+ get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */
+
+ /* Align the table to be 16 byte aligned. */
+ addr += 15;
+ addr &= ~15;
+
+ /* This table must be betweeen 0xf0000 & 0x100000 */
+ printk_info("Writing IRQ routing tables to 0x%x...", addr);
+
+ pirq = (void *)(addr);
+ v = (u8 *) (addr);
+
+ pirq->signature = PIRQ_SIGNATURE;
+ pirq->version = PIRQ_VERSION;
+
+ pirq->rtr_bus = bus_sb600[0];
+ pirq->rtr_devfn = ((sbdn_sb600 + 0x14) << 3) | 4;
+
+ pirq->exclusive_irqs = 0;
+
+ pirq->rtr_vendor = 0x1002;
+ pirq->rtr_device = 0x4384;
+
+ pirq->miniport_data = 0;
+
+ memset(pirq->rfu, 0, sizeof(pirq->rfu));
+
+ pirq_info = (void *)(&pirq->checksum + 1);
+ slot_num = 0;
+
+ /* pci bridge */
+ write_pirq_info(pirq_info, bus_sb600[0], ((sbdn_sb600 + 0x14) << 3) | 4,
+ 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0,
+ 0);
+ pirq_info++;
+ slot_num++;
+
+ pirq->size = 32 + 16 * slot_num;
+
+ for (i = 0; i < pirq->size; i++)
+ sum += v[i];
+
+ sum = pirq->checksum - sum;
+ if (sum != pirq->checksum) {
+ pirq->checksum = sum;
+ }
+
+ printk_info("write_pirq_routing_table done.\n");
+
+ return (unsigned long)pirq_info;
+}
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <arch/io.h>
+#include <boot/coreboot_tables.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+#include "chip.h"
+
+/********************************************************
+* dbm690t uses a BCM5789 as on-board NIC.
+* It has a pin named LOW_POWER to enable it into LOW POWER state.
+* In order to run NIC, we should let it out of Low power state. This pin
+* is controlled by sb600 GPM3.
+* RRG4.2.3 GPM as GPIO
+* GPM pins can be used as GPIO. The GPM I/O functions is controlled by three registers:
+* I/O C50, C51, C52, PM I/O94, 95, 96.
+* RRG4.2.3.1 GPM pins as Input
+* RRG4.2.3.2 GPM pins as Output
+********************************************************/
+static void enable_onboard_nic()
+{
+ u8 byte;
+
+ printk_info("enable_onboard_nic.\n");
+
+ outb(0x13, 0xC50);
+
+ byte = inb(0xC51);
+ byte &= 0x3F;
+ byte |= 0x40;
+ outb(byte, 0xC51);
+
+ byte = inb(0xC52);
+ byte &= ~0x8;
+ outb(byte, 0xC52);
+
+ byte = inb(0xC51);
+ byte &= 0x3F;
+ byte |= 0x80; /* 7:6=10 */
+ outb(byte, 0xC51);
+
+ byte = inb(0xC52);
+ byte &= ~0x8;
+ outb(byte, 0xC52);
+}
+
+/*************************************************
+* enable the dedicated function in dbm690t board.
+* This function called early than rs690_enable.
+*************************************************/
+void dbm690t_enable(device_t dev)
+{
+ struct mainboard_amd_dbm690t_config *mainboard =
+ (struct mainboard_amd_dbm690t_config *)dev->chip_info;
+
+#if (CONFIG_GFXUMA == 1)
+ msr_t msr, msr2;
+
+ /* TOP_MEM: the top of DRAM below 4G */
+ msr = rdmsr(TOP_MEM);
+ printk_info("dbm690t_enable, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n", msr.lo, msr.hi);
+
+ /* TOP_MEM2: the top of DRAM above 4G */
+ msr2 = rdmsr(TOP_MEM2);
+ printk_info("dbm690t_enable, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n", msr2.lo, msr2.hi);
+
+ switch (msr.lo) {
+ case 0x10000000: /* 256M system memory */
+ uma_memory_size = 0x2000000; /* 32M recommended UMA */
+ break;
+
+ case 0x18000000: /* 384M system memory */
+ uma_memory_size = 0x4000000; /* 64M recommended UMA */
+ break;
+
+ case 0x20000000: /* 512M system memory */
+ uma_memory_size = 0x4000000; /* 64M recommended UMA */
+ break;
+
+ default: /* 1GB and above system memory */
+ uma_memory_size = 0x8000000; /* 128M recommended UMA */
+ break;
+ }
+
+ uma_memory_start = msr.lo - uma_memory_size;/* TOP_MEM1 */
+ printk_info("dbm690t_enable: uma size 0x%08x, memory start 0x%08x\n", uma_memory_size, uma_memory_start);
+
+ /* TODO: TOP_MEM2 */
+#else
+ uma_memory_size = 0x8000000; /* 128M recommended UMA */
+ uma_memory_start = 0x38000000; /* 1GB system memory supposed */
+#endif
+
+ printk_info("dbm690t_enable. dev=0x%x\n", dev);
+
+ enable_onboard_nic();
+}
+
+/*
+* CONFIG_CHIP_NAME defined in Option.lb.
+*/
+struct chip_operations mainboard_amd_dbm690t_ops = {
+#if CONFIG_CHIP_NAME == 1
+ CHIP_NAME("AMD Dbm690t Mainboard")
+#endif
+ .enable_dev = dbm690t_enable,
+};
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <string.h>
+#include <stdint.h>
+
+#include <cpu/amd/amdk8_sysconf.h>
+
+extern u8 bus_isa;
+extern u8 bus_rs690[8];
+extern u8 bus_sb600[2];
+
+extern unsigned long apicid_sb600;
+
+extern unsigned long bus_type[256];
+extern unsigned long sbdn_rs690;
+extern unsigned long sbdn_sb600;
+
+extern void get_bus_conf(void);
+
+void *smp_write_config_table(void *v)
+{
+ static const char sig[4] = "PCMP";
+ static const char oem[8] = "ATI ";
+ static const char productid[12] = "DBM690T ";
+ struct mp_config_table *mc;
+ int i, j;
+
+ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+ memset(mc, 0, sizeof(*mc));
+
+ memcpy(mc->mpc_signature, sig, sizeof(sig));
+ mc->mpc_length = sizeof(*mc); /* initially just the header */
+ mc->mpc_spec = 0x04;
+ mc->mpc_checksum = 0; /* not yet computed */
+ memcpy(mc->mpc_oem, oem, sizeof(oem));
+ memcpy(mc->mpc_productid, productid, sizeof(productid));
+ mc->mpc_oemptr = 0;
+ mc->mpc_oemsize = 0;
+ mc->mpc_entry_count = 0; /* No entries yet... */
+ mc->mpc_lapic = LAPIC_ADDR;
+ mc->mpe_length = 0;
+ mc->mpe_checksum = 0;
+ mc->reserved = 0;
+
+ smp_write_processors(mc);
+
+ get_bus_conf();
+
+ /* Bus: Bus ID Type */
+ /* define bus and isa numbers */
+ for (j = 0; j < bus_isa; j++) {
+ smp_write_bus(mc, j, (char *)"PCI ");
+ }
+ smp_write_bus(mc, bus_isa, (char *)"ISA ");
+
+ /* I/O APICs: APIC ID Version State Address */
+ {
+ device_t dev;
+ u32 dword;
+ u8 byte;
+
+ dev =
+ dev_find_slot(bus_sb600[0],
+ PCI_DEVFN(sbdn_sb600 + 0x14, 0));
+ if (dev) {
+ dword = pci_read_config32(dev, 0x74) & 0xfffffff0;
+ smp_write_ioapic(mc, apicid_sb600, 0x11, dword);
+
+ /* Initialize interrupt mapping */
+ /* aza */
+ byte = pci_read_config8(dev, 0x63);
+ byte &= 0xf8;
+ byte |= 0; /* 0: INTA, ...., 7: INTH */
+ pci_write_config8(dev, 0x63, byte);
+
+ /* SATA */
+ dword = pci_read_config32(dev, 0xac);
+ dword &= ~(7 << 26);
+ dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */
+ /* dword |= 1<<22; PIC and APIC co exists */
+ pci_write_config32(dev, 0xac, dword);
+
+ /*
+ * 00:12.0: PROG SATA : INT F
+ * 00:13.0: INTA USB_0
+ * 00:13.1: INTB USB_1
+ * 00:13.2: INTC USB_2
+ * 00:13.3: INTD USB_3
+ * 00:13.4: INTC USB_4
+ * 00:13.5: INTD USB2
+ * 00:14.1: INTA IDE
+ * 00:14.2: Prog HDA : INT E
+ * 00:14.5: INTB ACI
+ * 00:14.6: INTB MCI
+ */
+ }
+ }
+
+ /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
+ smp_write_intsrc(mc, mp_ExtINT,
+ MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa,
+ 0x0, apicid_sb600, 0x0);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH,
+ bus_isa, 0x1, apicid_sb600, 0x1);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH,
+ bus_isa, 0x0, apicid_sb600, 0x2);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH,
+ bus_isa, 0x3, apicid_sb600, 0x3);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH,
+ bus_isa, 0x4, apicid_sb600, 0x4);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH,
+ bus_isa, 0x6, apicid_sb600, 0x6);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH,
+ bus_isa, 0x7, apicid_sb600, 0x7);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH,
+ bus_isa, 0xd, apicid_sb600, 0xd);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH,
+ bus_isa, 0xe, apicid_sb600, 0xe);
+
+ /* usb */
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
+ 0, 19 << 2 | 0, apicid_sb600, 0x10);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
+ 0, 19 << 2 | 1, apicid_sb600, 0x11);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
+ 0, 19 << 2 | 2, apicid_sb600, 0x12);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
+ 0, 19 << 2 | 3, apicid_sb600, 0x13);
+
+ /* sata */
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
+ 0, 18 << 2 | 0, apicid_sb600, 22);
+
+ /* HD Audio: b0:d20:f1:reg63 should be 0. */
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
+ 0, 20 << 2 | 0, apicid_sb600, 16);
+
+ /* on board NIC & Slot PCIE. */
+ i = 2;
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
+ bus_rs690[1], 0x5 << 2 | 0, apicid_sb600, 18);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
+ bus_rs690[1], 0x5 << 2 | 1, apicid_sb600, 19);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
+ bus_rs690[2], 0x0 << 2 | 0, apicid_sb600, 18);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
+ bus_rs690[3], 0x0 << 2 | 0, apicid_sb600, 19);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
+ bus_rs690[4], 0x0 << 2 | 0, apicid_sb600, 16);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
+ bus_rs690[5], 0x0 << 2 | 0, apicid_sb600, 17);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
+ bus_rs690[6], 0x0 << 2 | 0, apicid_sb600, 18);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
+ bus_rs690[7], 0x0 << 2 | 0, apicid_sb600, 19);
+
+ /* PCI slots */
+ i += 6;
+ j = 5;
+ /* PCI_SLOT 0. */
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
+ bus_sb600[1], 5 << 2 | 0, apicid_sb600, 20);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
+ bus_sb600[1], 5 << 2 | 1, apicid_sb600, 21);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
+ bus_sb600[1], 5 << 2 | 2, apicid_sb600, 22);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
+ bus_sb600[1], 5 << 2 | 3, apicid_sb600, 23);
+
+ /* PCI_SLOT 1. */
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
+ bus_sb600[1], 6 << 2 | 0, apicid_sb600, 21);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
+ bus_sb600[1], 6 << 2 | 1, apicid_sb600, 22);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
+ bus_sb600[1], 6 << 2 | 2, apicid_sb600, 23);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
+ bus_sb600[1], 6 << 2 | 3, apicid_sb600, 20);
+
+ /* PCI_SLOT 2. */
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
+ bus_sb600[1], 7 << 2 | 0, apicid_sb600, 22);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
+ bus_sb600[1], 7 << 2 | 1, apicid_sb600, 23);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
+ bus_sb600[1], 7 << 2 | 2, apicid_sb600, 20);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
+ bus_sb600[1], 7 << 2 | 3, apicid_sb600, 21);
+
+ /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
+ smp_write_intsrc(mc, mp_ExtINT,
+ MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa,
+ 0x0, MP_APIC_ALL, 0x0);
+ smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH,
+ bus_isa, 0x0, MP_APIC_ALL, 0x1);
+ /* There is no extension information... */
+
+ /* Compute the checksums */
+ mc->mpe_checksum =
+ smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
+ mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
+ printk_debug("Wrote the mp table end at: %p - %p\n",
+ mc, smp_next_mpe_entry(mc));
+ return smp_next_mpe_entry(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+ void *v;
+ v = smp_write_floating_table(addr);
+ return (unsigned long)smp_write_config_table(v);
+}
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+static void setup_dbm690t_resource_map(void)
+{
+ static const unsigned int register_values[] = {
+ /* Careful set limit registers before base registers which contain the enables */
+ /* DRAM Limit i Registers
+ * F1:0x44 i = 0
+ * F1:0x4C i = 1
+ * F1:0x54 i = 2
+ * F1:0x5C i = 3
+ * F1:0x64 i = 4
+ * F1:0x6C i = 5
+ * F1:0x74 i = 6
+ * F1:0x7C i = 7
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 7: 3] Reserved
+ * [10: 8] Interleave select
+ * specifies the values of A[14:12] to use with interleave enable.
+ * [15:11] Reserved
+ * [31:16] DRAM Limit Address i Bits 39-24
+ * This field defines the upper address bits of a 40 bit address
+ * that define the end of the DRAM region.
+ */
+ PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
+ PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
+ PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
+ PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
+ PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
+ PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
+ PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
+ /* DRAM Base i Registers
+ * F1:0x40 i = 0
+ * F1:0x48 i = 1
+ * F1:0x50 i = 2
+ * F1:0x58 i = 3
+ * F1:0x60 i = 4
+ * F1:0x68 i = 5
+ * F1:0x70 i = 6
+ * F1:0x78 i = 7
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 7: 2] Reserved
+ * [10: 8] Interleave Enable
+ * 000 = No interleave
+ * 001 = Interleave on A[12] (2 nodes)
+ * 010 = reserved
+ * 011 = Interleave on A[12] and A[14] (4 nodes)
+ * 100 = reserved
+ * 101 = reserved
+ * 110 = reserved
+ * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
+ * [15:11] Reserved
+ * [13:16] DRAM Base Address i Bits 39-24
+ * This field defines the upper address bits of a 40-bit address
+ * that define the start of the DRAM region.
+ */
+ PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
+
+ /* Memory-Mapped I/O Limit i Registers
+ * F1:0x84 i = 0
+ * F1:0x8C i = 1
+ * F1:0x94 i = 2
+ * F1:0x9C i = 3
+ * F1:0xA4 i = 4
+ * F1:0xAC i = 5
+ * F1:0xB4 i = 6
+ * F1:0xBC i = 7
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 3: 3] Reserved
+ * [ 5: 4] Destination Link ID
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 = Reserved
+ * [ 6: 6] Reserved
+ * [ 7: 7] Non-Posted
+ * 0 = CPU writes may be posted
+ * 1 = CPU writes must be non-posted
+ * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
+ * This field defines the upp adddress bits of a 40-bit address that
+ * defines the end of a memory-mapped I/O region n
+ */
+ PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00,
+
+ /* Memory-Mapped I/O Base i Registers
+ * F1:0x80 i = 0
+ * F1:0x88 i = 1
+ * F1:0x90 i = 2
+ * F1:0x98 i = 3
+ * F1:0xA0 i = 4
+ * F1:0xA8 i = 5
+ * F1:0xB0 i = 6
+ * F1:0xB8 i = 7
+ * [ 0: 0] Read Enable
+ * 0 = Reads disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes disabled
+ * 1 = Writes Enabled
+ * [ 2: 2] Cpu Disable
+ * 0 = Cpu can use this I/O range
+ * 1 = Cpu requests do not use this I/O range
+ * [ 3: 3] Lock
+ * 0 = base/limit registers i are read/write
+ * 1 = base/limit registers i are read-only
+ * [ 7: 4] Reserved
+ * [31: 8] Memory-Mapped I/O Base Address i (39-16)
+ * This field defines the upper address bits of a 40bit address
+ * that defines the start of memory-mapped I/O region i
+ */
+ PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
+
+ /* PCI I/O Limit i Registers
+ * F1:0xC4 i = 0
+ * F1:0xCC i = 1
+ * F1:0xD4 i = 2
+ * F1:0xDC i = 3
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 3: 3] Reserved
+ * [ 5: 4] Destination Link ID
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 = reserved
+ * [11: 6] Reserved
+ * [24:12] PCI I/O Limit Address i
+ * This field defines the end of PCI I/O region n
+ * [31:25] Reserved
+ */
+ PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000,
+ PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
+
+ /* PCI I/O Base i Registers
+ * F1:0xC0 i = 0
+ * F1:0xC8 i = 1
+ * F1:0xD0 i = 2
+ * F1:0xD8 i = 3
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 3: 2] Reserved
+ * [ 4: 4] VGA Enable
+ * 0 = VGA matches Disabled
+ * 1 = matches all address < 64K and where A[9:0] is in the
+ * range 3B0-3BB or 3C0-3DF independen of the base & limit registers
+ * [ 5: 5] ISA Enable
+ * 0 = ISA matches Disabled
+ * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
+ * from matching agains this base/limit pair
+ * [11: 6] Reserved
+ * [24:12] PCI I/O Base i
+ * This field defines the start of PCI I/O region n
+ * [31:25] Reserved
+ */
+ PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003,
+ PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
+
+ /* Config Base and Limit i Registers
+ * F1:0xE0 i = 0
+ * F1:0xE4 i = 1
+ * F1:0xE8 i = 2
+ * F1:0xEC i = 3
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 2: 2] Device Number Compare Enable
+ * 0 = The ranges are based on bus number
+ * 1 = The ranges are ranges of devices on bus 0
+ * [ 3: 3] Reserved
+ * [ 6: 4] Destination Node
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 7: 7] Reserved
+ * [ 9: 8] Destination Link
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 - Reserved
+ * [15:10] Reserved
+ * [23:16] Bus Number Base i
+ * This field defines the lowest bus number in configuration region i
+ * [31:24] Bus Number Limit i
+ * This field defines the highest bus number in configuration regin i
+ */
+ PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x08000003,
+ PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
+ };
+
+ int max;
+ max = sizeof(register_values) / sizeof(register_values[0]);
+ setup_resource_map(register_values, max);
+}
--- /dev/null
+# This will make a target directory of ./dbm690t
+
+target dbm690t
+mainboard amd/dbm690t
+
+romimage "normal"
+ option ROM_SIZE = 1024*1024 - 55808
+ option USE_FALLBACK_IMAGE=0
+ option ROM_IMAGE_SIZE=0x20000
+ option XIP_ROM_SIZE=0x20000
+ payload ../payload.elf
+end
+
+romimage "fallback"
+ option USE_FALLBACK_IMAGE=1
+ option ROM_IMAGE_SIZE=0x20000
+ option XIP_ROM_SIZE=0x20000
+ payload ../payload.elf
+end
+
+buildrom ./coreboot.rom ROM_SIZE "normal" "fallback"
projects / coreboot.git / commitdiff