dir lib
dir boot
-if CONFIG_SMP
- dir smp
-end
+dir smp
gsi_base+=4; \
} while(0);
-#define IO_APIC_ADDR 0xfec00000UL
-
#else // CONFIG_GENERATE_ACPI_TABLES
#define write_acpi_tables(start) (start)
--- /dev/null
+/*
+ * coreboot IOAPIC support
+ *
+ * Copyright (C) 2010 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef __I386_ARCH_IOAPIC_H
+#define __I386_ARCH_IOAPIC_H
+
+#define IO_APIC_ADDR 0xfec00000UL
+#define IO_APIC_INTERRUPTS 24
+
+#define ALL (0xff << 24)
+#define NONE (0)
+#define DISABLED (1 << 16)
+#define ENABLED (0 << 16)
+#define TRIGGER_EDGE (0 << 15)
+#define TRIGGER_LEVEL (1 << 15)
+#define POLARITY_HIGH (0 << 13)
+#define POLARITY_LOW (1 << 13)
+#define PHYSICAL_DEST (0 << 11)
+#define LOGICAL_DEST (1 << 11)
+#define ExtINT (7 << 8)
+#define NMI (4 << 8)
+#define SMI (2 << 8)
+#define INT (1 << 8)
+
+void setup_ioapic(u32 ioapic_base, u8 ioapic_id);
+void clear_ioapic(u32 ioapic_base);
+
+#endif
uses CONFIG_GENERATE_MP_TABLE
+uses CONFIG_IOAPIC
if CONFIG_GENERATE_MP_TABLE
object mpspec.o
end
-#object ioapic.o CONFIG_IOAPIC
-
+if CONFIG_IOAPIC
+ object ioapic.o
+end
obj-$(CONFIG_GENERATE_MP_TABLE) += mpspec.o
-# what about this: how awkward.
-#object ioapic.o CONFIG_IOAPIC
+obj-$(CONFIG_IOAPIC) += ioapic.o
-#include <console/console.h>
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <arch/io.h>
#include <arch/ioapic.h>
+#include <console/console.h>
+#include <cpu/x86/lapic.h>
-/* we have to do more than we thought. I assumed Linux would do all the
- * interesting parts, and I was wrong.
- */
-struct ioapicreg {
- unsigned int reg;
- unsigned int value_low, value_high;
-};
-struct ioapicreg ioapicregvalues[] = {
-#define ALL (0xff << 24)
-#define NONE (0)
-#define DISABLED (1 << 16)
-#define ENABLED (0 << 16)
-#define TRIGGER_EDGE (0 << 15)
-#define TRIGGER_LEVEL (1 << 15)
-#define POLARITY_HIGH (0 << 13)
-#define POLARITY_LOW (1 << 13)
-#define PHYSICAL_DEST (0 << 11)
-#define LOGICAL_DEST (1 << 11)
-#define ExtINT (7 << 8)
-#define NMI (4 << 8)
-#define SMI (2 << 8)
-#define INT (1 << 8)
- /* mask, trigger, polarity, destination, delivery, vector */
- {0x00, DISABLED, NONE},
- {0x01, DISABLED, NONE},
- {0x02, DISABLED, NONE},
- {0x03, DISABLED, NONE},
- {0x04, DISABLED, NONE},
- {0x05, DISABLED, NONE},
- {0x06, DISABLED, NONE},
- {0x07, DISABLED, NONE},
- {0x08, DISABLED, NONE},
- {0x09, DISABLED, NONE},
- {0x0a, DISABLED, NONE},
- {0x0b, DISABLED, NONE},
- {0x0c, DISABLED, NONE},
- {0x0d, DISABLED, NONE},
- {0x0e, DISABLED, NONE},
- {0x0f, DISABLED, NONE},
- {0x10, DISABLED, NONE},
- {0x11, DISABLED, NONE},
- {0x12, DISABLED, NONE},
- {0x13, DISABLED, NONE},
- {0x14, DISABLED, NONE},
- {0x14, DISABLED, NONE},
- {0x15, DISABLED, NONE},
- {0x16, DISABLED, NONE},
- {0x17, DISABLED, NONE},
-};
-
-void setup_ioapic(void)
+static u32 io_apic_read(u32 ioapic_base, u32 reg)
+{
+ write32(ioapic_base, reg);
+ return read32(ioapic_base + 0x10);
+}
+
+static void io_apic_write(u32 ioapic_base, u32 reg, u32 value)
+{
+ write32(ioapic_base, reg);
+ write32(ioapic_base + 0x10, value);
+}
+
+
+void clear_ioapic(u32 ioapic_base)
+{
+ u32 low, high;
+ u32 i, ioapic_interrupts;
+
+ printk_debug("IOAPIC: Clearing IOAPIC at 0x%08x\n", ioapic_base);
+
+ /* Read the available number of interrupts */
+ ioapic_interrupts = (io_apic_read(ioapic_base, 1) >> 16) & 0xff;
+ if (!ioapic_interrupts || ioapic_interrupts == 0xff)
+ ioapic_interrupts = 24;
+ printk_debug("IOAPIC: %d interrupts\n", ioapic_interrupts);
+
+ low = DISABLED;
+ high = NONE;
+
+ for (i = 0; i < ioapic_interrupts; i++) {
+ io_apic_write(ioapic_base, i * 2 + 0x10, low);
+ io_apic_write(ioapic_base, i * 2 + 0x11, high);
+
+ printk_spew("IOAPIC: reg 0x%08x value 0x%08x 0x%08x\n", i, high, low);
+ }
+
+ if (io_apic_read(ioapic_base, 0x10) == 0xffffffff) {
+ printk_warning("IO APIC not responding.\n");
+ return;
+ }
+}
+
+void setup_ioapic(u32 ioapic_base, u8 ioapic_id)
{
- int i;
- unsigned long value_low, value_high;
- unsigned long ioapicaddr = 0xfec00000;
- volatile unsigned long *l;
- struct ioapicreg *a = ioapicregvalues;
-
- l = (unsigned long *) ioapicaddr;
-#if defined(i786)
- /* For the pentium 4 and above apic deliver their interrupts
+ u32 bsp_lapicid = lapicid();
+ u32 low, high;
+ u32 i, ioapic_interrupts;
+
+ printk_debug("IOAPIC: Initializing IOAPIC at 0x%08x\n", ioapic_base);
+ printk_debug("IOAPIC: Bootstrap Processor Local APIC = %02x\n",
+ bsp_lapicid);
+
+ if (ioapic_id) {
+ printk_debug("IOAPIC: ID = 0x%02x\n", ioapic_id);
+ /* Set IOAPIC ID if it has been specified */
+ io_apic_write(ioapic_base, 0x00,
+ (io_apic_read(ioapic_base, 0x00) & 0xfff0ffff) |
+ (ioapic_id << 24));
+ }
+
+ /* Read the available number of interrupts */
+ ioapic_interrupts = (io_apic_read(ioapic_base, 1) >> 16) & 0xff;
+ if (!ioapic_interrupts || ioapic_interrupts == 0xff)
+ ioapic_interrupts = 24;
+ printk_debug("IOAPIC: %d interrupts\n", ioapic_interrupts);
+
+
+// XXX this decision should probably be made elsewhere, and
+// it's the C3, not the EPIA this depends on.
+#if defined(CONFIG_EPIA_VT8237R_INIT) && CONFIG_EPIA_VT8237R_INIT
+#define IOAPIC_INTERRUPTS_ON_APIC_SERIAL_BUS
+#else
+#define IOAPIC_INTERRUPTS_ON_FSB
+#endif
+
+#ifdef IOAPIC_INTERRUPTS_ON_FSB
+ /* For the Pentium 4 and above APICs deliver their interrupts
* on the front side bus, enable that.
*/
- l[0] = 0x03;
- l[4] = 1;
-#endif /* i786 */
- for (i = 0; i < ARRAY_SIZE(ioapicregvalues);
- i++, a++) {
- l[0] = (a->reg * 2) + 0x10;
- l[4] = a->value_low;
- value_low = l[4];
- l[0] = (a->reg *2) + 0x11;
- l[4] = a->value_high;
- value_high = l[4];
- if ((i==0) && (value_low == 0xffffffff)) {
- printk_warning("IO APIC not responding.\n");
- return;
- }
- printk_spew("for IRQ, reg 0x%08x value 0x%08x 0x%08x\n",
- a->reg, a->value_low, a->value_high);
+ printk_debug("IOAPIC: Enabling interrupts on FSB\n");
+ io_apic_write(ioapic_base, 0x03, io_apic_read(ioapic_base, 0x03) | (1 << 0));
+#endif
+#ifdef IOAPIC_INTERRUPTS_ON_APIC_SERIAL_BUS
+ printk_debug("IOAPIC: Enabling interrupts on APIC serial bus\n");
+ io_apic_write(ioapic_base, 0x03, 0);
+#endif
+
+ /* Enable Virtual Wire Mode */
+ low = ENABLED | TRIGGER_EDGE | POLARITY_HIGH | PHYSICAL_DEST | ExtINT;
+ high = bsp_lapicid << (56 - 32);
+
+ io_apic_write(ioapic_base, 0x10, low);
+ io_apic_write(ioapic_base, 0x11, high);
+
+ if (io_apic_read(ioapic_base, 0x10) == 0xffffffff) {
+ printk_warning("IO APIC not responding.\n");
+ return;
+ }
+
+ printk_spew("IOAPIC: reg 0x%08x value 0x%08x 0x%08x\n", 0, high, low);
+
+ low = DISABLED;
+ high = NONE;
+
+ for (i = 1; i < ioapic_interrupts; i++) {
+ io_apic_write(ioapic_base, i * 2 + 0x10, low);
+ io_apic_write(ioapic_base, i * 2 + 0x11, high);
+
+ printk_spew("IOAPIC: reg 0x%08x value 0x%08x 0x%08x\n", i, high, low);
}
}
uses CONFIG_GENERATE_PIRQ_TABLE
+uses CONFIG_GENERATE_MP_TABLE
uses CONFIG_USE_FALLBACK_IMAGE
uses CONFIG_HAVE_FALLBACK_BOOT
uses CONFIG_HAVE_HARD_RESET
default CONFIG_GENERATE_PIRQ_TABLE=1
default CONFIG_IRQ_SLOT_COUNT=5
default CONFIG_PIRQ_ROUTE=1
+default CONFIG_GENERATE_MP_TABLE=0
##
## Build code to export a CMOS option table
uses CONFIG_PCI_ROM_RUN
uses CONFIG_CONSOLE_VGA
uses CONFIG_VIDEO_MB
+uses CONFIG_SMP
uses CONFIG_IOAPIC
default CONFIG_ROM_SIZE = 512 * 1024
-default CONFIG_IOAPIC = 0
+default CONFIG_SMP = 1
+default CONFIG_IOAPIC = 1
default CONFIG_VIDEO_MB = 32
default CONFIG_CONSOLE_SERIAL8250 = 1
default CONFIG_PCI_ROM_RUN = 0
## Build code for SMP support
## Only worry about 2 micro processors
##
-default CONFIG_SMP=0
+default CONFIG_SMP=1
default CONFIG_MAX_CPUS=2
default CONFIG_MAX_PHYSICAL_CPUS=1
default CONFIG_LOGICAL_CPUS=1
uses CONFIG_IOAPIC
default CONFIG_ROM_SIZE = 512 * 1024
-default CONFIG_IOAPIC = 0
+default CONFIG_IOAPIC = 1
default CONFIG_VIDEO_MB = 32
default CONFIG_CONSOLE_SERIAL8250 = 1
default CONFIG_PCI_ROM_RUN = 0
default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1019
default CONFIG_ROM_SIZE = 512 * 1024
-default CONFIG_IOAPIC = 0
+default CONFIG_IOAPIC = 1
default CONFIG_VIDEO_MB = 32
default CONFIG_CONSOLE_SERIAL8250 = 1
default CONFIG_PCI_ROM_RUN = 0
default CONFIG_ROM_SIZE = 512 * 1024
default CONFIG_ROM_IMAGE_SIZE = 64 * 1024
default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_IOAPIC = 0
+default CONFIG_IOAPIC = 1
default CONFIG_VIDEO_MB = 32
default CONFIG_CONSOLE_SERIAL8250 = 1
default CONFIG_PCI_ROM_RUN = 0
#include <pc80/isa-dma.h>
#include <cpu/x86/lapic.h>
+#include <arch/ioapic.h>
#include <stdlib.h>
#define ACPI_IO_BASE 0x400
#define HPET_ADDR 0xfe800000UL
-#define IOAPIC_ADDR 0xfec00000ULL
-
-#if CONFIG_IOAPIC
-struct ioapicreg {
- unsigned int reg;
- unsigned int value_low, value_high;
-};
-
-static struct ioapicreg ioapicregvalues[] = {
-#define ALL (0xff << 24)
-#define NONE (0)
-#define DISABLED (1 << 16)
-#define ENABLED (0 << 16)
-#define TRIGGER_EDGE (0 << 15)
-#define TRIGGER_LEVEL (1 << 15)
-#define POLARITY_HIGH (0 << 13)
-#define POLARITY_LOW (1 << 13)
-#define PHYSICAL_DEST (0 << 11)
-#define LOGICAL_DEST (1 << 11)
-#define ExtINT (7 << 8)
-#define NMI (4 << 8)
-#define SMI (2 << 8)
-#define INT (1 << 8)
- /* IO-APIC virtual wire mode configuration */
- /* mask, trigger, polarity, destination, delivery, vector */
- { 0, ENABLED | TRIGGER_EDGE | POLARITY_HIGH | PHYSICAL_DEST | ExtINT, NONE},
- { 1, DISABLED, NONE},
- { 2, DISABLED, NONE},
- { 3, DISABLED, NONE},
- { 4, DISABLED, NONE},
- { 5, DISABLED, NONE},
- { 6, DISABLED, NONE},
- { 7, DISABLED, NONE},
- { 8, DISABLED, NONE},
- { 9, DISABLED, NONE},
- {10, DISABLED, NONE},
- {11, DISABLED, NONE},
- {12, DISABLED, NONE},
- {13, DISABLED, NONE},
- {14, DISABLED, NONE},
- {15, DISABLED, NONE},
- {16, DISABLED, NONE},
- {17, DISABLED, NONE},
- {18, DISABLED, NONE},
- {19, DISABLED, NONE},
- {20, DISABLED, NONE},
- {21, DISABLED, NONE},
- {22, DISABLED, NONE},
- {23, DISABLED, NONE},
-};
-
-static void setup_ioapic(void)
-{
- int i;
- unsigned long value_low, value_high, val;
- unsigned long ioapic_base = IOAPIC_ADDR;
- volatile unsigned long *l;
- struct ioapicreg *a = ioapicregvalues;
- unsigned long bsp_lapicid = lapicid();
-
- l = (unsigned long *)ioapic_base;
-
- /* Set APIC ADDR */
- l[0] = 0;
- val = l[4];
- l[4] = (val & 0xF0FFFF) | (2 << 24); // 2 == ID as programmed elsewhere. should be a define? XXX
-
- /* Set APIC to FSB message bus. */
- l[0] = 0x3;
- val = l[4];
- l[4] = (val & 0xFFFFFE) | 1;
-
- ioapicregvalues[0].value_high = bsp_lapicid << (56 - 32);
-
- printk_debug("IOAPIC: Bootstrap Processor Local APIC ID = %02x\n", bsp_lapicid);
-
- for (i = 0; i < ARRAY_SIZE(ioapicregvalues); i++, a++) {
- l[0] = (a->reg * 2) + 0x10;
- l[4] = a->value_low;
- value_low = l[4];
- l[0] = (a->reg * 2) + 0x11;
- l[4] = a->value_high;
- value_high = l[4];
- if ((i == 0) && (value_low == 0xffffffff)) {
- printk_warning("IOAPIC is not responding.\n");
- return;
- }
- printk_debug("IOAPIC: IRQ reg 0x%08x value 0x%08x 0x%08x\n",
- a->reg, a->value_low, a->value_high);
- }
-}
-#endif
static const unsigned char pci_irqs[4] = { 11, 11, 10, 10 };
cx700_set_lpc_registers(dev);
#if CONFIG_IOAPIC
- setup_ioapic();
+#define IO_APIC_ID 2
+ setup_ioapic(IO_APIC_ADDR, IO_APIC_ID);
#endif
/* Initialize interrupts */
#include <pc80/mc146818rtc.h>
#include <pc80/isa-dma.h>
#include <cpu/x86/lapic.h>
+#include <arch/ioapic.h>
#include <stdlib.h>
#include "amd8111.h"
#define NMI_OFF 0
-struct ioapicreg {
- unsigned int reg;
- unsigned int value_low, value_high;
-};
-
-static struct ioapicreg ioapicregvalues[] = {
-#define ALL (0xff << 24)
-#define NONE (0)
-#define DISABLED (1 << 16)
-#define ENABLED (0 << 16)
-#define TRIGGER_EDGE (0 << 15)
-#define TRIGGER_LEVEL (1 << 15)
-#define POLARITY_HIGH (0 << 13)
-#define POLARITY_LOW (1 << 13)
-#define PHYSICAL_DEST (0 << 11)
-#define LOGICAL_DEST (1 << 11)
-#define ExtINT (7 << 8)
-#define NMI (4 << 8)
-#define SMI (2 << 8)
-#define INT (1 << 8)
- /* IO-APIC virtual wire mode configuration */
- /* mask, trigger, polarity, destination, delivery, vector */
- { 0, ENABLED | TRIGGER_EDGE | POLARITY_HIGH | PHYSICAL_DEST | ExtINT, NONE},
- { 1, DISABLED, NONE},
- { 2, DISABLED, NONE},
- { 3, DISABLED, NONE},
- { 4, DISABLED, NONE},
- { 5, DISABLED, NONE},
- { 6, DISABLED, NONE},
- { 7, DISABLED, NONE},
- { 8, DISABLED, NONE},
- { 9, DISABLED, NONE},
- { 10, DISABLED, NONE},
- { 11, DISABLED, NONE},
- { 12, DISABLED, NONE},
- { 13, DISABLED, NONE},
- { 14, DISABLED, NONE},
- { 15, DISABLED, NONE},
- { 16, DISABLED, NONE},
- { 17, DISABLED, NONE},
- { 18, DISABLED, NONE},
- { 19, DISABLED, NONE},
- { 20, DISABLED, NONE},
- { 21, DISABLED, NONE},
- { 22, DISABLED, NONE},
- { 23, DISABLED, NONE},
- /* Be careful and don't write past the end... */
-};
-
-static void setup_ioapic(void)
-{
- int i;
- unsigned long value_low, value_high;
- unsigned long ioapic_base = 0xfec00000;
- volatile unsigned long *l;
- struct ioapicreg *a = ioapicregvalues;
- unsigned long bsp_apicid = lapicid();
-
- l = (unsigned long *) ioapic_base;
-
- ioapicregvalues[0].value_high = bsp_apicid<<(56-32);
- printk_debug("amd8111: ioapic bsp_apicid = %02lx\n", bsp_apicid);
-
- for (i = 0; i < ARRAY_SIZE(ioapicregvalues);
- i++, a++) {
- l[0] = (a->reg * 2) + 0x10;
- l[4] = a->value_low;
- value_low = l[4];
- l[0] = (a->reg *2) + 0x11;
- l[4] = a->value_high;
- value_high = l[4];
- if ((i==0) && (value_low == 0xffffffff)) {
- printk_warning("IO APIC not responding.\n");
- return;
- }
- printk_spew("for IRQ, reg 0x%08x value 0x%08x 0x%08x\n",
- a->reg, a->value_low, a->value_high);
- }
-}
-
static void enable_hpet(struct device *dev)
{
unsigned long hpet_address;
byte = pci_read_config8(dev, 0x4B);
byte |= 1;
pci_write_config8(dev, 0x4B, byte);
- setup_ioapic();
+ /* Don't rename IO APIC */
+ setup_ioapic(IO_APIC_ADDR, 0);
/* posted memory write enable */
byte = pci_read_config8(dev, 0x46);
#include <bitops.h>
#include <arch/io.h>
#include <cpu/x86/lapic.h>
+#include <arch/ioapic.h>
#include <stdlib.h>
#include "sb600.h"
#include "sb600_smbus.c"
#define CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL MAINBOARD_POWER_ON
#endif
-struct ioapicreg {
- u32 reg;
- u32 value_low, value_high;
-};
-
-static struct ioapicreg ioapicregvalues[] = {
-#define ALL (0xff << 24)
-#define NONE (0)
-#define DISABLED (1 << 16)
-#define ENABLED (0 << 16)
-#define TRIGGER_EDGE (0 << 15)
-#define TRIGGER_LEVEL (1 << 15)
-#define POLARITY_HIGH (0 << 13)
-#define POLARITY_LOW (1 << 13)
-#define PHYSICAL_DEST (0 << 11)
-#define LOGICAL_DEST (1 << 11)
-#define ExtINT (7 << 8)
-#define NMI (4 << 8)
-#define SMI (2 << 8)
-#define INT (1 << 8)
- /* IO-APIC virtual wire mode configuration */
- /* mask, trigger, polarity, destination, delivery, vector */
- {0, DISABLED, NONE},
- {1, DISABLED, NONE},
- {2, DISABLED, NONE},
- {3, DISABLED, NONE},
- {4, DISABLED, NONE},
- {5, DISABLED, NONE},
- {6, DISABLED, NONE},
- {7, DISABLED, NONE},
- {8, DISABLED, NONE},
- {9, DISABLED, NONE},
- {10, DISABLED, NONE},
- {11, DISABLED, NONE},
- {12, DISABLED, NONE},
- {13, DISABLED, NONE},
- {14, DISABLED, NONE},
- {15, DISABLED, NONE},
- {16, DISABLED, NONE},
- {17, DISABLED, NONE},
- {18, DISABLED, NONE},
- {19, DISABLED, NONE},
- {20, DISABLED, NONE},
- {21, DISABLED, NONE},
- {22, DISABLED, NONE},
- {23, DISABLED, NONE},
- /* Be careful and don't write past the end... */
-};
-
-static void setup_ioapic(u32 ioapic_base)
-{
- int i;
- u32 value_low, value_high;
- volatile u32 *l;
- struct ioapicreg *a = ioapicregvalues;
-
- ioapicregvalues[0].value_high = lapicid() << (56 - 32);
-
- printk_debug("lapicid = %016x\n", ioapicregvalues[0].value_high);
-
- l = (u32 *)ioapic_base;
-
- for (i = 0; i < ARRAY_SIZE(ioapicregvalues);
- i++, a++) {
- l[0] = (a->reg * 2) + 0x10;
- l[4] = a->value_low;
- value_low = l[4];
- l[0] = (a->reg * 2) + 0x11;
- l[4] = a->value_high;
- value_high = l[4];
- if ((i == 0) && (value_low == 0xffffffff)) {
- printk_warning("IO APIC not responding.\n");
- return;
- }
- }
-}
-
/*
* SB600 enables all USB controllers by default in SMBUS Control.
* SB600 enables SATA by default in SMBUS Control.
printk_info("sm_init().\n");
ioapic_base = pci_read_config32(dev, 0x74) & (0xffffffe0); /* some like mem resource, but does not have enable bit */
- setup_ioapic(ioapic_base);
+ /* Don't rename APIC ID */
+ setup_ioapic(ioapic_base, 0);
dword = pci_read_config8(dev, 0x62);
dword |= 1 << 2;
#include <pc80/mc146818rtc.h>
#include <pc80/isa-dma.h>
#include <arch/io.h>
+#include <arch/ioapic.h>
#include "esb6300.h"
#define ACPI_BAR 0x40
#define CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL MAINBOARD_POWER_ON
#endif
-#define ALL (0xff << 24)
-#define NONE (0)
-#define DISABLED (1 << 16)
-#define ENABLED (0 << 16)
-#define TRIGGER_EDGE (0 << 15)
-#define TRIGGER_LEVEL (1 << 15)
-#define POLARITY_HIGH (0 << 13)
-#define POLARITY_LOW (1 << 13)
-#define PHYSICAL_DEST (0 << 11)
-#define LOGICAL_DEST (1 << 11)
-#define ExtINT (7 << 8)
-#define NMI (4 << 8)
-#define SMI (2 << 8)
-#define INT (1 << 8)
-
-static void setup_ioapic(device_t dev)
-{
- int i;
- unsigned long value_low, value_high;
- unsigned long ioapic_base = 0xfec00000;
- volatile unsigned long *l;
- unsigned interrupts;
-
- l = (unsigned long *) ioapic_base;
-
- l[0] = 0x01;
- interrupts = (l[04] >> 16) & 0xff;
- for (i = 0; i < interrupts; i++) {
- l[0] = (i * 2) + 0x10;
- l[4] = DISABLED;
- value_low = l[4];
- l[0] = (i * 2) + 0x11;
- l[4] = NONE; /* Should this be an address? */
- value_high = l[4];
- if (value_low == 0xffffffff) {
- printk_warning("%d IO APIC not responding.\n",
- dev_path(dev));
- return;
- }
- }
-
- /* Put the ioapic in virtual wire mode */
- l[0] = 0 + 0x10;
- l[4] = ENABLED | TRIGGER_EDGE | POLARITY_HIGH | PHYSICAL_DEST | ExtINT;
-}
-
#define SERIRQ_CNTL 0x64
static void esb6300_enable_serial_irqs(device_t dev)
{
value |= (1 << 8)|(1<<7);
value |= (6 << 0)|(1<<13)|(1<<11);
pci_write_config32(dev, 0xd0, value);
- setup_ioapic(dev);
+ setup_ioapic(0xfec00000, 0); // don't rename IO APIC ID
/* disable reset timer */
pci_write_config8(dev, 0xd4, 0x02);
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
+#include <arch/ioapic.h>
#include "esb6300.h"
-#define ALL (0xff << 24)
-#define NONE (0)
-#define DISABLED (1 << 16)
-#define ENABLED (0 << 16)
-#define TRIGGER_EDGE (0 << 15)
-#define TRIGGER_LEVEL (1 << 15)
-#define POLARITY_HIGH (0 << 13)
-#define POLARITY_LOW (1 << 13)
-#define PHYSICAL_DEST (0 << 11)
-#define LOGICAL_DEST (1 << 11)
-#define ExtINT (7 << 8)
-#define NMI (4 << 8)
-#define SMI (2 << 8)
-#define INT (1 << 8)
-
-static void setup_ioapic(device_t dev)
-{
- int i;
- unsigned long value_low, value_high;
- unsigned long ioapic_base = 0xfec10000;
- volatile unsigned long *l;
- unsigned interrupts;
-
- l = (unsigned long *) ioapic_base;
-
- l[0] = 0x01;
- interrupts = (l[04] >> 16) & 0xff;
- for (i = 0; i < interrupts; i++) {
- l[0] = (i * 2) + 0x10;
- l[4] = DISABLED;
- value_low = l[4];
- l[0] = (i * 2) + 0x11;
- l[4] = NONE; /* Should this be an address? */
- value_high = l[4];
- if (value_low == 0xffffffff) {
- printk_warning("%s IO APIC not responding.\n",
- dev_path(dev));
- return;
- }
- }
-}
-
static void pic_init(struct device *dev)
{
pci_write_config8(dev, 0x3c, 0xff);
/* Setup the ioapic */
- setup_ioapic(dev);
+ clear_ioapic(0xfec10000);
}
static void pic_read_resources(device_t dev)
#include <pc80/mc146818rtc.h>
#include <pc80/isa-dma.h>
#include <arch/io.h>
+#include <arch/ioapic.h>
#include "i3100.h"
#define ACPI_BAR 0x40
#define CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL MAINBOARD_POWER_ON
#endif
-#define ALL (0xff << 24)
-#define NONE (0)
-#define DISABLED (1 << 16)
-#define ENABLED (0 << 16)
-#define TRIGGER_EDGE (0 << 15)
-#define TRIGGER_LEVEL (1 << 15)
-#define POLARITY_HIGH (0 << 13)
-#define POLARITY_LOW (1 << 13)
-#define PHYSICAL_DEST (0 << 11)
-#define LOGICAL_DEST (1 << 11)
-#define ExtINT (7 << 8)
-#define NMI (4 << 8)
-#define SMI (2 << 8)
-#define INT (1 << 8)
-
-static void setup_ioapic(device_t dev)
-{
- int i;
- u32 value_low, value_high;
- u32 ioapic_base = 0xfec00000;
- volatile u32 *l;
- u32 interrupts;
- struct resource *res;
-
- /* Enable IO APIC */
- res = find_resource(dev, RCBA);
- if (!res) {
- return;
- }
- *((u8 *)(res->base + 0x31ff)) |= (1 << 0);
-
- l = (u32 *) ioapic_base;
-
- l[0] = 0x01;
- interrupts = (l[04] >> 16) & 0xff;
- for (i = 0; i < interrupts; i++) {
- l[0] = (i * 2) + 0x10;
- l[4] = DISABLED;
- value_low = l[4];
- l[0] = (i * 2) + 0x11;
- l[4] = NONE; /* Should this be an address? */
- value_high = l[4];
- if (value_low == 0xffffffff) {
- printk_warning("%d IO APIC not responding.\n",
- dev_path(dev));
- return;
- }
- }
-
- /* Put the APIC in virtual wire mode */
- l[0] = 0x12;
- l[4] = ENABLED | TRIGGER_EDGE | POLARITY_HIGH | PHYSICAL_DEST | ExtINT;
-}
-
static void i3100_enable_serial_irqs(device_t dev)
{
/* set packet length and toggle silent mode bit */
static void lpc_init(struct device *dev)
{
- setup_ioapic(dev);
+ struct resource *res;
+
+ /* Enable IO APIC */
+ res = find_resource(dev, RCBA);
+ if (!res) {
+ return;
+ }
+ *((u8 *)(res->base + 0x31ff)) |= (1 << 0);
+
+ // TODO this code sets int 0 of the IOAPIC in Virtual Wire Mode
+ // (register 0x10/0x11) while the old code used int 1 (register 0x12)
+ // ... Why?
+ setup_ioapic(IO_APIC_ADDR, 0); // Don't rename IOAPIC ID
/* Decode 0xffc00000 - 0xffffffff to fwh idsel 0 */
pci_write_config32(dev, 0xd0, 0x00000000);
#include <pc80/mc146818rtc.h>
#include <pc80/isa-dma.h>
#include <arch/io.h>
+#include <arch/ioapic.h>
#include "i82801er.h"
#define ACPI_BAR 0x40
#define CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL MAINBOARD_POWER_ON
#endif
-#define ALL (0xff << 24)
-#define NONE (0)
-#define DISABLED (1 << 16)
-#define ENABLED (0 << 16)
-#define TRIGGER_EDGE (0 << 15)
-#define TRIGGER_LEVEL (1 << 15)
-#define POLARITY_HIGH (0 << 13)
-#define POLARITY_LOW (1 << 13)
-#define PHYSICAL_DEST (0 << 11)
-#define LOGICAL_DEST (1 << 11)
-#define ExtINT (7 << 8)
-#define NMI (4 << 8)
-#define SMI (2 << 8)
-#define INT (1 << 8)
-
-static void setup_ioapic(void)
-{
- int i;
- unsigned long value_low, value_high;
- unsigned long ioapic_base = 0xfec00000;
- volatile unsigned long *l;
- unsigned interrupts;
-
- l = (unsigned long *) ioapic_base;
-
- l[0] = 0x01;
- interrupts = (l[04] >> 16) & 0xff;
- for (i = 0; i < interrupts; i++) {
- l[0] = (i * 2) + 0x10;
- l[4] = DISABLED;
- value_low = l[4];
- l[0] = (i * 2) + 0x11;
- l[4] = NONE; /* Should this be an address? */
- value_high = l[4];
- if (value_low == 0xffffffff) {
- printk_warning("IO APIC not responding.\n");
- return;
- }
- }
-
- /* Put the ioapic in virtual wire mode */
- l[0] = 0 + 0x10;
- l[4] = ENABLED | TRIGGER_EDGE | POLARITY_HIGH | PHYSICAL_DEST | ExtINT;
-}
-
#define SERIRQ_CNTL 0x64
static void i82801er_enable_serial_irqs(device_t dev)
{
value = pci_read_config32(dev, 0xd4);
value |= (1<<1);
pci_write_config32(dev, 0xd4, value);
- setup_ioapic();
+ setup_ioapic(IO_APIC_ADDR, 0); // Don't rename IO APIC ID.
i82801er_enable_serial_irqs(dev);
#include <device/pci_ops.h>
#include <device/pcix.h>
#include <pc80/mc146818rtc.h>
+#include <arch/ioapic.h>
#include <delay.h>
#include "pxhd.h"
.device = 0x032a,
};
-#define ALL (0xff << 24)
-#define NONE (0)
-#define DISABLED (1 << 16)
-#define ENABLED (0 << 16)
-#define TRIGGER_EDGE (0 << 15)
-#define TRIGGER_LEVEL (1 << 15)
-#define POLARITY_HIGH (0 << 13)
-#define POLARITY_LOW (1 << 13)
-#define PHYSICAL_DEST (0 << 11)
-#define LOGICAL_DEST (1 << 11)
-#define ExtINT (7 << 8)
-#define NMI (4 << 8)
-#define SMI (2 << 8)
-#define INT (1 << 8)
- /* IO-APIC virtual wire mode configuration */
- /* mask, trigger, polarity, destination, delivery, vector */
-
-static void setup_ioapic(device_t dev)
-{
- int i;
- unsigned long value_low, value_high;
- unsigned long ioapic_base;
- volatile unsigned long *l;
- unsigned interrupts;
-
- ioapic_base = pci_read_config32(dev, PCI_BASE_ADDRESS_0);
- l = (unsigned long *) ioapic_base;
-
- /* Enable front side bus delivery */
- l[0] = 0x03;
- l[4] = 1;
-
- l[0] = 0x01;
- interrupts = (l[04] >> 16) & 0xff;
- for (i = 0; i < interrupts; i++) {
- l[0] = (i * 2) + 0x10;
- l[4] = DISABLED;
- value_low = l[4];
- l[0] = (i * 2) + 0x11;
- l[4] = NONE; /* Should this be an address? */
- value_high = l[4];
- if (value_low == 0xffffffff) {
- printk_warning("IO APIC not responding.\n");
- return;
- }
- }
-}
-
static void ioapic_init(device_t dev)
{
- uint32_t value;
+ uint32_t value, ioapic_base;
/* Enable bus mastering so IOAPICs work */
value = pci_read_config16(dev, PCI_COMMAND);
value |= PCI_COMMAND_MASTER;
pci_write_config16(dev, PCI_COMMAND, value);
- setup_ioapic(dev);
+ ioapic_base = pci_read_config32(dev, PCI_BASE_ADDRESS_0);
+
+ setup_ioapic(ioapic_base, 0); // Don't rename IOAPIC ID
}
static void intel_set_subsystem(device_t dev, unsigned vendor, unsigned device)
#include <pc80/isa-dma.h>
#include <bitops.h>
#include <arch/io.h>
+#include <arch/ioapic.h>
#include <cpu/x86/lapic.h>
#include <stdlib.h>
#include "ck804.h"
#define NMI_OFF 0
-struct ioapicreg {
- unsigned int reg;
- unsigned int value_low, value_high;
-};
-
-static struct ioapicreg ioapicregvalues[] = {
-#define ALL (0xff << 24)
-#define NONE (0)
-#define DISABLED (1 << 16)
-#define ENABLED (0 << 16)
-#define TRIGGER_EDGE (0 << 15)
-#define TRIGGER_LEVEL (1 << 15)
-#define POLARITY_HIGH (0 << 13)
-#define POLARITY_LOW (1 << 13)
-#define PHYSICAL_DEST (0 << 11)
-#define LOGICAL_DEST (1 << 11)
-#define ExtINT (7 << 8)
-#define NMI (4 << 8)
-#define SMI (2 << 8)
-#define INT (1 << 8)
- /* IO-APIC virtual wire mode configuration */
- /* mask, trigger, polarity, destination, delivery, vector */
- {0, ENABLED | TRIGGER_EDGE | POLARITY_HIGH | PHYSICAL_DEST | ExtINT, NONE},
- {1, DISABLED, NONE},
- {2, DISABLED, NONE},
- {3, DISABLED, NONE},
- {4, DISABLED, NONE},
- {5, DISABLED, NONE},
- {6, DISABLED, NONE},
- {7, DISABLED, NONE},
- {8, DISABLED, NONE},
- {9, DISABLED, NONE},
- {10, DISABLED, NONE},
- {11, DISABLED, NONE},
- {12, DISABLED, NONE},
- {13, DISABLED, NONE},
- {14, DISABLED, NONE},
- {15, DISABLED, NONE},
- {16, DISABLED, NONE},
- {17, DISABLED, NONE},
- {18, DISABLED, NONE},
- {19, DISABLED, NONE},
- {20, DISABLED, NONE},
- {21, DISABLED, NONE},
- {22, DISABLED, NONE},
- {23, DISABLED, NONE},
- /* Be careful and don't write past the end... */
-};
-
-static void setup_ioapic(unsigned long ioapic_base)
-{
- int i;
- unsigned long value_low, value_high;
- /* unsigned long ioapic_base = 0xfec00000; */
- volatile unsigned long *l;
- struct ioapicreg *a = ioapicregvalues;
-
- ioapicregvalues[0].value_high = lapicid() << (56 - 32);
-
- l = (unsigned long *)ioapic_base;
-
- for (i = 0; i < ARRAY_SIZE(ioapicregvalues); i++, a++) {
- l[0] = (a->reg * 2) + 0x10;
- l[4] = a->value_low;
- value_low = l[4];
- l[0] = (a->reg * 2) + 0x11;
- l[4] = a->value_high;
- value_high = l[4];
- if ((i == 0) && (value_low == 0xffffffff)) {
- printk_warning("IO APIC not responding.\n");
- return;
- }
- printk_spew("for IRQ, reg 0x%08x value 0x%08x 0x%08x\n",
- a->reg, a->value_low, a->value_high);
- }
-}
-
// 0x7a or e3
#define PREVIOUS_POWER_STATE 0x7A
pci_write_config8(dev, 0x74, byte);
dword = pci_read_config32(dev, PCI_BASE_ADDRESS_1); /* 0x14 */
- setup_ioapic(dword);
+ setup_ioapic(dword, 0); // Don't rename IOAPIC ID
#if 1
dword = pci_read_config32(dev, 0xe4);
#include <pc80/isa-dma.h>
#include <bitops.h>
#include <arch/io.h>
+#include <arch/ioapic.h>
#include <cpu/x86/lapic.h>
#include <stdlib.h>
#include "mcp55.h"
#define NMI_OFF 0
-struct ioapicreg {
- unsigned int reg;
- unsigned int value_low, value_high;
-};
-
-static struct ioapicreg ioapicregvalues[] = {
-#define ALL (0xff << 24)
-#define NONE (0)
-#define DISABLED (1 << 16)
-#define ENABLED (0 << 16)
-#define TRIGGER_EDGE (0 << 15)
-#define TRIGGER_LEVEL (1 << 15)
-#define POLARITY_HIGH (0 << 13)
-#define POLARITY_LOW (1 << 13)
-#define PHYSICAL_DEST (0 << 11)
-#define LOGICAL_DEST (1 << 11)
-#define ExtINT (7 << 8)
-#define NMI (4 << 8)
-#define SMI (2 << 8)
-#define INT (1 << 8)
- /* IO-APIC virtual wire mode configuration */
- /* mask, trigger, polarity, destination, delivery, vector */
- { 0, ENABLED | TRIGGER_EDGE | POLARITY_HIGH | PHYSICAL_DEST | ExtINT, NONE},
- { 1, DISABLED, NONE},
- { 2, DISABLED, NONE},
- { 3, DISABLED, NONE},
- { 4, DISABLED, NONE},
- { 5, DISABLED, NONE},
- { 6, DISABLED, NONE},
- { 7, DISABLED, NONE},
- { 8, DISABLED, NONE},
- { 9, DISABLED, NONE},
- { 10, DISABLED, NONE},
- { 11, DISABLED, NONE},
- { 12, DISABLED, NONE},
- { 13, DISABLED, NONE},
- { 14, DISABLED, NONE},
- { 15, DISABLED, NONE},
- { 16, DISABLED, NONE},
- { 17, DISABLED, NONE},
- { 18, DISABLED, NONE},
- { 19, DISABLED, NONE},
- { 20, DISABLED, NONE},
- { 21, DISABLED, NONE},
- { 22, DISABLED, NONE},
- { 23, DISABLED, NONE},
- /* Be careful and don't write past the end... */
-};
-
-static void setup_ioapic(unsigned long ioapic_base, int master)
-{
- int i;
- unsigned long value_low, value_high;
-// unsigned long ioapic_base = 0xfec00000;
- volatile unsigned long *l;
- struct ioapicreg *a = ioapicregvalues;
-
- if (master) {
- ioapicregvalues[0].value_high = lapicid()<<(56-32);
- ioapicregvalues[0].value_low = ENABLED | TRIGGER_EDGE | POLARITY_HIGH | PHYSICAL_DEST | ExtINT;
- }
- else {
- ioapicregvalues[0].value_high = NONE;
- ioapicregvalues[0].value_low = DISABLED;
- }
-
- l = (unsigned long *) ioapic_base;
-
- for (i = 0; i < ARRAY_SIZE(ioapicregvalues);
- i++, a++) {
- l[0] = (a->reg * 2) + 0x10;
- l[4] = a->value_low;
- value_low = l[4];
- l[0] = (a->reg *2) + 0x11;
- l[4] = a->value_high;
- value_high = l[4];
- if ((i==0) && (value_low == 0xffffffff)) {
- printk_warning("IO APIC not responding.\n");
- return;
- }
- printk_spew("for IRQ, reg 0x%08x value 0x%08x 0x%08x\n",
- a->reg, a->value_low, a->value_high);
- }
-}
-
// 0x7a or e3
#define PREVIOUS_POWER_STATE 0x7A
static void lpc_common_init(device_t dev, int master)
{
uint8_t byte;
- uint32_t dword;
+ uint32_t ioapic_base;
/* IO APIC initialization */
byte = pci_read_config8(dev, 0x74);
byte |= (1<<0); // enable APIC
pci_write_config8(dev, 0x74, byte);
- dword = pci_read_config32(dev, PCI_BASE_ADDRESS_1); // 0x14
+ ioapic_base = pci_read_config32(dev, PCI_BASE_ADDRESS_1); // 0x14
- setup_ioapic(dword, master);
+ if (master)
+ setup_ioapic(ioapic_base, 0);
+ else
+ clear_ioapic(ioapic_base);
}
static void lpc_slave_init(device_t dev)
#include <pc80/isa-dma.h>
#include <bitops.h>
#include <arch/io.h>
+#include <arch/ioapic.h>
#include <cpu/x86/lapic.h>
#include <stdlib.h>
#include "sis966.h"
#define NMI_OFF 0
-struct ioapicreg {
- unsigned int reg;
- unsigned int value_low, value_high;
-};
-
-static struct ioapicreg ioapicregvalues[] = {
-#define ALL (0xff << 24)
-#define NONE (0)
-#define DISABLED (1 << 16)
-#define ENABLED (0 << 16)
-#define TRIGGER_EDGE (0 << 15)
-#define TRIGGER_LEVEL (1 << 15)
-#define POLARITY_HIGH (0 << 13)
-#define POLARITY_LOW (1 << 13)
-#define PHYSICAL_DEST (0 << 11)
-#define LOGICAL_DEST (1 << 11)
-#define ExtINT (7 << 8)
-#define NMI (4 << 8)
-#define SMI (2 << 8)
-#define INT (1 << 8)
- /* IO-APIC virtual wire mode configuration */
- /* mask, trigger, polarity, destination, delivery, vector */
- { 0, ENABLED | TRIGGER_EDGE | POLARITY_HIGH | PHYSICAL_DEST | ExtINT, NONE},
- { 1, DISABLED, NONE},
- { 2, DISABLED, NONE},
- { 3, DISABLED, NONE},
- { 4, DISABLED, NONE},
- { 5, DISABLED, NONE},
- { 6, DISABLED, NONE},
- { 7, DISABLED, NONE},
- { 8, DISABLED, NONE},
- { 9, DISABLED, NONE},
- { 10, DISABLED, NONE},
- { 11, DISABLED, NONE},
- { 12, DISABLED, NONE},
- { 13, DISABLED, NONE},
- { 14, DISABLED, NONE},
- { 15, DISABLED, NONE},
- { 16, DISABLED, NONE},
- { 17, DISABLED, NONE},
- { 18, DISABLED, NONE},
- { 19, DISABLED, NONE},
- { 20, DISABLED, NONE},
- { 21, DISABLED, NONE},
- { 22, DISABLED, NONE},
- { 23, DISABLED, NONE},
- /* Be careful and don't write past the end... */
-};
-
-static void setup_ioapic(unsigned long ioapic_base)
-{
- int i;
- unsigned long value_low, value_high;
-// unsigned long ioapic_base = 0xfec00000;
- volatile unsigned long *l;
- struct ioapicreg *a = ioapicregvalues;
-
- ioapicregvalues[0].value_high = lapicid()<<(56-32);
-
- l = (unsigned long *) ioapic_base;
-
- for (i = 0; i < ARRAY_SIZE(ioapicregvalues);
- i++, a++) {
- l[0] = (a->reg * 2) + 0x10;
- l[4] = a->value_low;
- value_low = l[4];
- l[0] = (a->reg *2) + 0x11;
- l[4] = a->value_high;
- value_high = l[4];
- if ((i==0) && (value_low == 0xffffffff)) {
- printk_warning("IO APIC not responding.\n");
- return;
- }
- printk_spew("for IRQ, reg 0x%08x value 0x%08x 0x%08x\n",
- a->reg, a->value_low, a->value_high);
- }
-}
-
// 0x7a or e3
#define PREVIOUS_POWER_STATE 0x7A
static void lpc_common_init(device_t dev)
{
uint8_t byte;
- uint32_t dword;
+ uint32_t ioapic_base;
/* IO APIC initialization */
byte = pci_read_config8(dev, 0x74);
byte |= (1<<0); // enable APIC
pci_write_config8(dev, 0x74, byte);
- dword = pci_read_config32(dev, PCI_BASE_ADDRESS_1); // 0x14
-
- setup_ioapic(dword);
+ ioapic_base = pci_read_config32(dev, PCI_BASE_ADDRESS_1); // 0x14
+ setup_ioapic(ioapic_base, 0); // Don't rename IO APIC ID
}
static void lpc_slave_init(device_t dev)
#include <device/pci.h>
#include <device/pci_ids.h>
#include <pc80/mc146818rtc.h>
+#include <arch/ioapic.h>
#include <cpu/x86/lapic.h>
#include <pc80/keyboard.h>
#include <pc80/i8259.h>
#include "vt8237r.h"
#include "chip.h"
-#define ALL (0xff << 24)
-#define NONE (0)
-#define DISABLED (1 << 16)
-#define ENABLED (0 << 16)
-#define TRIGGER_EDGE (0 << 15)
-#define TRIGGER_LEVEL (1 << 15)
-#define POLARITY_HIGH (0 << 13)
-#define POLARITY_LOW (1 << 13)
-#define PHYSICAL_DEST (0 << 11)
-#define LOGICAL_DEST (1 << 11)
-#define ExtINT (7 << 8)
-#define NMI (4 << 8)
-#define SMI (2 << 8)
-#define INT (1 << 8)
-
extern void dump_south(device_t dev);
static void southbridge_init_common(struct device *dev);
}
#endif
-static struct ioapicreg {
- u32 reg;
- u32 value_low;
- u32 value_high;
-} ioapic_table[] = {
- /* IO-APIC virtual wire mode configuration. */
- /* mask, trigger, polarity, destination, delivery, vector */
- {0, ENABLED | TRIGGER_EDGE | POLARITY_HIGH | PHYSICAL_DEST |
- ExtINT, NONE},
- {1, DISABLED, NONE},
- {2, DISABLED, NONE},
- {3, DISABLED, NONE},
- {4, DISABLED, NONE},
- {5, DISABLED, NONE},
- {6, DISABLED, NONE},
- {7, DISABLED, NONE},
- {8, DISABLED, NONE},
- {9, DISABLED, NONE},
- {10, DISABLED, NONE},
- {11, DISABLED, NONE},
- {12, DISABLED, NONE},
- {13, DISABLED, NONE},
- {14, DISABLED, NONE},
- {15, DISABLED, NONE},
- {16, DISABLED, NONE},
- {17, DISABLED, NONE},
- {18, DISABLED, NONE},
- {19, DISABLED, NONE},
- {20, DISABLED, NONE},
- {21, DISABLED, NONE},
- {22, DISABLED, NONE},
- {23, DISABLED, NONE},
-};
-
-static void setup_ioapic(u32 ioapic_base)
-{
- u32 value_low, value_high, val;
- volatile u32 *l;
- int i;
-
- /* All delivered to CPU0. */
- ioapic_table[0].value_high = (lapicid()) << (56 - 32);
- l = (u32 *)ioapic_base;
-
-#if CONFIG_EPIA_VT8237R_INIT
- /* Set APIC to APIC Serial bus. */
- l[0] = 0x3;
- l[4] = 0;
-#else
- /* Set APIC to FSB message bus. */
- l[0] = 0x3;
- val = l[4];
- l[4] = (val & 0xFFFFFE) | 1;
-#endif
-
- /* Set APIC ADDR - this will be VT8237R_APIC_ID. */
- l[0] = 0;
- val = l[4];
- l[4] = (val & 0xF0FFFF) | (VT8237R_APIC_ID << 24);
-
- for (i = 0; i < ARRAY_SIZE(ioapic_table); i++) {
- l[0] = (ioapic_table[i].reg * 2) + 0x10;
- l[4] = ioapic_table[i].value_low;
- value_low = l[4];
- l[0] = (ioapic_table[i].reg * 2) + 0x11;
- l[4] = ioapic_table[i].value_high;
- if (i == 0) {
- l[0] = (ioapic_table[i].reg * 2) + 0x10;
- value_low = l[4];
- if (value_low == 0xffffffff)
- {
- printk_warning("IO APIC not responding.\n");
- return;
- }
- }
- }
-}
-
-
/** Set up PCI IRQ routing, route everything through APIC. */
static void pci_routing_fixup(struct device *dev)
{
{
vt8237_common_init(dev);
pci_routing_fixup(dev);
- setup_ioapic(VT8237R_APIC_BASE);
+ setup_ioapic(VT8237R_APIC_BASE, VT8237R_APIC_ID);
setup_i8259();
init_keyboard(dev);
}
projects / coreboot.git / commitdiff