--- /dev/null
+struct syscall_result {
+ long val;
+ int errno;
+};
+
+static struct syscall_result syscall_return(long result)
+{
+ struct syscall_result res;
+ if (((unsigned long)result) >= ((unsigned long)-125)) {
+ res.errno = - result;
+ res.val = -1;
+ } else {
+ res.errno = 0;
+ res.val = result;
+ }
+ return res;
+}
+
+static struct syscall_result syscall0(unsigned long nr)
+{
+ long res;
+ asm volatile(
+ "int $0x80"
+ : "a" (res)
+ : "a" (nr));
+ return syscall_return(res);
+}
+
+static struct syscall_result syscall1(unsigned long nr, unsigned long arg1)
+{
+ long res;
+ asm volatile(
+ "int $0x80"
+ : "a" (res)
+ : "a" (nr), "b" (arg1));
+ return syscall_return(res);
+
+}
+
+static struct syscall_result syscall2(unsigned long nr, unsigned long arg1, unsigned long arg2)
+{
+ long res;
+ asm volatile(
+ "int $0x80"
+ : "a" (res)
+ : "a" (nr), "b" (arg1), "c" (arg2));
+ return syscall_return(res);
+
+}
+
+
+static struct syscall_result syscall3(unsigned long nr, unsigned long arg1, unsigned long arg2,
+ unsigned long arg3)
+{
+ long res;
+ asm volatile(
+ "int $0x80"
+ : "a" (res)
+ : "a" (nr), "b" (arg1), "c" (arg2), "d" (arg3));
+ return syscall_return(res);
+
+}
+
+static struct syscall_result syscall4(unsigned long nr, unsigned long arg1, unsigned long arg2,
+ unsigned long arg3, unsigned long arg4)
+{
+ long res;
+ asm volatile(
+ "int $0x80"
+ : "a" (res)
+ : "a" (nr), "b" (arg1), "c" (arg2), "d" (arg3), "S" (arg4));
+ return syscall_return(res);
+
+}
+
+static struct syscall_result syscall5(unsigned long nr, unsigned long arg1, unsigned long arg2,
+ unsigned long arg3, unsigned long arg4, unsigned long arg5)
+{
+ long res;
+ asm volatile(
+ "int $0x80"
+ : "a" (res)
+ : "a" (nr), "b" (arg1), "c" (arg2), "d" (arg3),
+ "S" (arg4), "D" (arg5));
+ return syscall_return(res);
+
+}
+
+#define NR_exit 1
+#define NR_fork 2
+#define NR_read 3
+#define NR_write 4
+#define NR_open 5
+#define NR_close 6
+#define NR_waitpid 7
+#define NR_creat 8
+#define NR_link 9
+#define NR_unlink 10
+#define NR_execve 11
+#define NR_chdir 12
+#define NR_time 13
+#define NR_mknod 14
+#define NR_chmod 15
+#define NR_lchown 16
+#define NR_break 17
+#define NR_oldstat 18
+#define NR_lseek 19
+#define NR_getpid 20
+#define NR_mount 21
+#define NR_umount 22
+#define NR_setuid 23
+#define NR_getuid 24
+#define NR_stime 25
+#define NR_ptrace 26
+#define NR_alarm 27
+#define NR_oldfstat 28
+#define NR_pause 29
+#define NR_utime 30
+#define NR_stty 31
+#define NR_gtty 32
+#define NR_access 33
+#define NR_nice 34
+#define NR_ftime 35
+#define NR_sync 36
+#define NR_kill 37
+#define NR_rename 38
+#define NR_mkdir 39
+#define NR_rmdir 40
+#define NR_dup 41
+#define NR_pipe 42
+#define NR_times 43
+#define NR_prof 44
+#define NR_brk 45
+#define NR_setgid 46
+#define NR_getgid 47
+#define NR_signal 48
+#define NR_geteuid 49
+#define NR_getegid 50
+#define NR_acct 51
+#define NR_umount2 52
+#define NR_lock 53
+#define NR_ioctl 54
+#define NR_fcntl 55
+#define NR_mpx 56
+#define NR_setpgid 57
+#define NR_ulimit 58
+#define NR_oldolduname 59
+#define NR_umask 60
+#define NR_chroot 61
+#define NR_ustat 62
+#define NR_dup2 63
+#define NR_getppid 64
+#define NR_getpgrp 65
+#define NR_setsid 66
+#define NR_sigaction 67
+#define NR_sgetmask 68
+#define NR_ssetmask 69
+#define NR_setreuid 70
+#define NR_setregid 71
+#define NR_sigsuspend 72
+#define NR_sigpending 73
+#define NR_sethostname 74
+#define NR_setrlimit 75
+#define NR_getrlimit 76
+#define NR_getrusage 77
+#define NR_gettimeofday 78
+#define NR_settimeofday 79
+#define NR_getgroups 80
+#define NR_setgroups 81
+#define NR_select 82
+#define NR_symlink 83
+#define NR_oldlstat 84
+#define NR_readlink 85
+#define NR_uselib 86
+#define NR_swapon 87
+#define NR_reboot 88
+#define NR_readdir 89
+#define NR_mmap 90
+#define NR_munmap 91
+#define NR_truncate 92
+#define NR_ftruncate 93
+#define NR_fchmod 94
+#define NR_fchown 95
+#define NR_getpriority 96
+#define NR_setpriority 97
+#define NR_profil 98
+#define NR_statfs 99
+#define NR_fstatfs 100
+#define NR_ioperm 101
+#define NR_socketcall 102
+#define NR_syslog 103
+#define NR_setitimer 104
+#define NR_getitimer 105
+#define NR_stat 106
+#define NR_lstat 107
+#define NR_fstat 108
+#define NR_olduname 109
+#define NR_iopl 110
+#define NR_vhangup 111
+#define NR_idle 112
+#define NR_vm86old 113
+#define NR_wait4 114
+#define NR_swapoff 115
+#define NR_sysinfo 116
+#define NR_ipc 117
+#define NR_fsync 118
+#define NR_sigreturn 119
+#define NR_clone 120
+#define NR_setdomainname 121
+#define NR_uname 122
+#define NR_modify_ldt 123
+#define NR_adjtimex 124
+#define NR_mprotect 125
+#define NR_sigprocmask 126
+#define NR_create_module 127
+#define NR_init_module 128
+#define NR_delete_module 129
+#define NR_get_kernel_syms 130
+#define NR_quotactl 131
+#define NR_getpgid 132
+#define NR_fchdir 133
+#define NR_bdflush 134
+#define NR_sysfs 135
+#define NR_personality 136
+#define NR_afs_syscall 137 /* Syscall for Andrew File System */
+#define NR_setfsuid 138
+#define NR_setfsgid 139
+#define NR__llseek 140
+#define NR_getdents 141
+#define NR__newselect 142
+#define NR_flock 143
+#define NR_msync 144
+#define NR_readv 145
+#define NR_writev 146
+#define NR_getsid 147
+#define NR_fdatasync 148
+#define NR__sysctl 149
+#define NR_mlock 150
+#define NR_munlock 151
+#define NR_mlockall 152
+#define NR_munlockall 153
+#define NR_sched_setparam 154
+#define NR_sched_getparam 155
+#define NR_sched_setscheduler 156
+#define NR_sched_getscheduler 157
+#define NR_sched_yield 158
+#define NR_sched_get_priority_max 159
+#define NR_sched_get_priority_min 160
+#define NR_sched_rr_get_interval 161
+#define NR_nanosleep 162
+#define NR_mremap 163
+#define NR_setresuid 164
+#define NR_getresuid 165
+#define NR_vm86 166
+#define NR_query_module 167
+#define NR_poll 168
+#define NR_nfsservctl 169
+#define NR_setresgid 170
+#define NR_getresgid 171
+#define NR_prctl 172
+#define NR_rt_sigreturn 173
+#define NR_rt_sigaction 174
+#define NR_rt_sigprocmask 175
+#define NR_rt_sigpending 176
+#define NR_rt_sigtimedwait 177
+#define NR_rt_sigqueueinfo 178
+#define NR_rt_sigsuspend 179
+#define NR_pread 180
+#define NR_pwrite 181
+#define NR_chown 182
+#define NR_getcwd 183
+#define NR_capget 184
+#define NR_capset 185
+#define NR_sigaltstack 186
+#define NR_sendfile 187
+#define NR_getpmsg 188 /* some people actually want streams */
+#define NR_putpmsg 189 /* some people actually want streams */
+#define NR_vfork 190
+
+typedef long ssize_t;
+typedef unsigned long size_t;
+
+/* Standard file descriptors */
+#define STDIN_FILENO 0 /* Standard input */
+#define STDOUT_FILENO 1 /* Standard output */
+#define STDERR_FILENO 2 /* Standard error output */
+
+static ssize_t write(int fd, const void *buf, size_t count)
+{
+ struct syscall_result res;
+ res = syscall3(NR_write, fd, (unsigned long)buf, count);
+ return res.val;
+}
+
+static void _exit(int status)
+{
+ struct syscall_result res;
+ res = syscall1(NR_exit, status);
+}
+
+static const char *addr_of_char(unsigned char ch)
+{
+ static const char byte[] = {
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+ 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
+ 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
+ 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
+ 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27,
+ 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f,
+ 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37,
+ 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
+ 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47,
+ 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f,
+ 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57,
+ 0x58, 0x59, 0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f,
+ 0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67,
+ 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f,
+ 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77,
+ 0x78, 0x79, 0x7a, 0x7b, 0x7c, 0x7d, 0x7e, 0x7f,
+ 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
+ 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
+ 0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
+ 0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f,
+ 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7,
+ 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf,
+ 0xb0, 0xb1, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6, 0xb7,
+ 0xb8, 0xb9, 0xba, 0xbb, 0xbc, 0xbd, 0xbe, 0xbf,
+ 0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7,
+ 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf,
+ 0xd0, 0xd1, 0xd2, 0xd3, 0xd4, 0xd5, 0xd6, 0xd7,
+ 0xd8, 0xd9, 0xda, 0xdb, 0xdc, 0xdd, 0xde, 0xdf,
+ 0xe0, 0xe1, 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7,
+ 0xe8, 0xe9, 0xea, 0xeb, 0xec, 0xed, 0xee, 0xef,
+ 0xf0, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7,
+ 0xf8, 0xf9, 0xfa, 0xfb, 0xfc, 0xfd, 0xfe, 0xff,
+ };
+ return byte + ch;
+}
+
+static void console_tx_byte(unsigned char ch)
+{
+ write(STDOUT_FILENO, addr_of_char(ch), 1);
+}
+
+static void console_tx_nibble(unsigned nibble)
+{
+ unsigned char digit;
+ digit = nibble + '0';
+ if (digit > '9') {
+ digit += 39;
+ }
+ console_tx_byte(digit);
+}
+
+static void console_tx_char(unsigned char byte)
+{
+ console_tx_byte(byte);
+}
+
+static void console_tx_hex8(unsigned char value)
+{
+ console_tx_nibble((value >> 4U) & 0x0fU);
+ console_tx_nibble(value & 0x0fU);
+}
+
+static void console_tx_hex16(unsigned short value)
+{
+ console_tx_nibble((value >> 12U) & 0x0FU);
+ console_tx_nibble((value >> 8U) & 0x0FU);
+ console_tx_nibble((value >> 4U) & 0x0FU);
+ console_tx_nibble(value & 0x0FU);
+}
+
+static void console_tx_hex32(unsigned short value)
+{
+ console_tx_nibble((value >> 28U) & 0x0FU);
+ console_tx_nibble((value >> 24U) & 0x0FU);
+ console_tx_nibble((value >> 20U) & 0x0FU);
+ console_tx_nibble((value >> 16U) & 0x0FU);
+ console_tx_nibble((value >> 12U) & 0x0FU);
+ console_tx_nibble((value >> 8U) & 0x0FU);
+ console_tx_nibble((value >> 4U) & 0x0FU);
+ console_tx_nibble(value & 0x0FU);
+}
+
+static void console_tx_string(const char *str)
+{
+ unsigned char ch;
+ while((ch = *str++) != '\0') {
+ console_tx_byte(ch);
+ }
+}
+
+static void print_debug_char(unsigned char byte) { console_tx_char(byte); }
+static void print_debug_hex8(unsigned char value) { console_tx_hex8(value); }
+static void print_debug_hex16(unsigned short value){ console_tx_hex16(value); }
+static void print_debug_hex32(unsigned int value) { console_tx_hex32(value); }
+static void print_debug(const char *str) { console_tx_string(str); }
+
+
+static void setup_coherent_ht_domain(void)
+{
+ static const unsigned int register_values[] = {
+#if 1
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((0) & 0x07) << 8) | ((0x40) & 0xFF)), 0xfff0f0f0, 0x00010101,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((0) & 0x07) << 8) | ((0x44) & 0xFF)), 0xfff0f0f0, 0x00010101,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((0) & 0x07) << 8) | ((0x48) & 0xFF)), 0xfff0f0f0, 0x00010101,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((0) & 0x07) << 8) | ((0x4c) & 0xFF)), 0xfff0f0f0, 0x00010101,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((0) & 0x07) << 8) | ((0x50) & 0xFF)), 0xfff0f0f0, 0x00010101,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((0) & 0x07) << 8) | ((0x54) & 0xFF)), 0xfff0f0f0, 0x00010101,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((0) & 0x07) << 8) | ((0x58) & 0xFF)), 0xfff0f0f0, 0x00010101,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((0) & 0x07) << 8) | ((0x5c) & 0xFF)), 0xfff0f0f0, 0x00010101,
+# 983 "/home/eric/projects/linuxbios/checkin/solo/freebios2/src/mainboard/amd/solo/auto.c"
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((0) & 0x07) << 8) | ((0x68) & 0xFF)), 0x00800000, 0x0f00840f,
+# 1005 "/home/eric/projects/linuxbios/checkin/solo/freebios2/src/mainboard/amd/solo/auto.c"
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((0) & 0x07) << 8) | ((0x6C) & 0xFF)), 0xffffff8c, 0x00000000 | (1 << 6) |(1 << 5)| (1 << 4),
+# 1082 "/home/eric/projects/linuxbios/checkin/solo/freebios2/src/mainboard/amd/solo/auto.c"
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((0) & 0x07) << 8) | ((0x84) & 0xFF)), 0x00009c05, 0x11110020,
+# 1127 "/home/eric/projects/linuxbios/checkin/solo/freebios2/src/mainboard/amd/solo/auto.c"
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((0) & 0x07) << 8) | ((0x88) & 0xFF)), 0xfffff0ff, 0x00000200,
+# 1148 "/home/eric/projects/linuxbios/checkin/solo/freebios2/src/mainboard/amd/solo/auto.c"
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((0) & 0x07) << 8) | ((0x94) & 0xFF)), 0xff000000, 0x00ff0000,
+# 1182 "/home/eric/projects/linuxbios/checkin/solo/freebios2/src/mainboard/amd/solo/auto.c"
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x44) & 0xFF)), 0x0000f8f8, 0x003f0000,
+
+
+
+
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x4C) & 0xFF)), 0x0000f8f8, 0x00000001,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x54) & 0xFF)), 0x0000f8f8, 0x00000002,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x5C) & 0xFF)), 0x0000f8f8, 0x00000003,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x64) & 0xFF)), 0x0000f8f8, 0x00000004,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x6C) & 0xFF)), 0x0000f8f8, 0x00000005,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x74) & 0xFF)), 0x0000f8f8, 0x00000006,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x7C) & 0xFF)), 0x0000f8f8, 0x00000007,
+# 1224 "/home/eric/projects/linuxbios/checkin/solo/freebios2/src/mainboard/amd/solo/auto.c"
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x40) & 0xFF)), 0x0000f8fc, 0x00000003,
+
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x48) & 0xFF)), 0x0000f8fc, 0x00400000,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x50) & 0xFF)), 0x0000f8fc, 0x00400000,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x58) & 0xFF)), 0x0000f8fc, 0x00400000,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x60) & 0xFF)), 0x0000f8fc, 0x00400000,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x68) & 0xFF)), 0x0000f8fc, 0x00400000,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x70) & 0xFF)), 0x0000f8fc, 0x00400000,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x78) & 0xFF)), 0x0000f8fc, 0x00400000,
+# 1276 "/home/eric/projects/linuxbios/checkin/solo/freebios2/src/mainboard/amd/solo/auto.c"
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x84) & 0xFF)), 0x00000048, 0x00e1ff00,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x8C) & 0xFF)), 0x00000048, 0x00dfff00,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x94) & 0xFF)), 0x00000048, 0x00e3ff00,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x9C) & 0xFF)), 0x00000048, 0x00000000,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xA4) & 0xFF)), 0x00000048, 0x00000000,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xAC) & 0xFF)), 0x00000048, 0x00000000,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xB4) & 0xFF)), 0x00000048, 0x00000b00,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xBC) & 0xFF)), 0x00000048, 0x00fe0b00,
+# 1311 "/home/eric/projects/linuxbios/checkin/solo/freebios2/src/mainboard/amd/solo/auto.c"
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x80) & 0xFF)), 0x000000f0, 0x00e00003,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x88) & 0xFF)), 0x000000f0, 0x00d80003,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x90) & 0xFF)), 0x000000f0, 0x00e20003,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x98) & 0xFF)), 0x000000f0, 0x00000000,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xA0) & 0xFF)), 0x000000f0, 0x00000000,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xA8) & 0xFF)), 0x000000f0, 0x00000000,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xB0) & 0xFF)), 0x000000f0, 0x00000a03,
+
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xB8) & 0xFF)), 0x000000f0, 0x00400003,
+# 1350 "/home/eric/projects/linuxbios/checkin/solo/freebios2/src/mainboard/amd/solo/auto.c"
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xC4) & 0xFF)), 0xFE000FC8, 0x0000d000,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xCC) & 0xFF)), 0xFE000FC8, 0x000ff000,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xD4) & 0xFF)), 0xFE000FC8, 0x00000000,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xDC) & 0xFF)), 0xFE000FC8, 0x00000000,
+# 1380 "/home/eric/projects/linuxbios/checkin/solo/freebios2/src/mainboard/amd/solo/auto.c"
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xC0) & 0xFF)), 0xFE000FCC, 0x0000d003,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xC8) & 0xFF)), 0xFE000FCC, 0x00001013,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xD0) & 0xFF)), 0xFE000FCC, 0x00000000,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xD8) & 0xFF)), 0xFE000FCC, 0x00000000,
+# 1421 "/home/eric/projects/linuxbios/checkin/solo/freebios2/src/mainboard/amd/solo/auto.c"
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xE0) & 0xFF)), 0x0000FC88, 0xff000003,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xE4) & 0xFF)), 0x0000FC88, 0x00000000,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xE8) & 0xFF)), 0x0000FC88, 0x00000000,
+ ( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xEC) & 0xFF)), 0x0000FC88, 0x00000000,
+#else
+#define PCI_ADDR(BUS, DEV, FN, WHERE) ( \
+ (((BUS) & 0xFF) << 16) | \
+ (((DEV) & 0x1f) << 11) | \
+ (((FN) & 0x07) << 8) | \
+ ((WHERE) & 0xFF))
+
+ /* Routing Table Node i
+ * F0:0x40 i = 0,
+ * F0:0x44 i = 1,
+ * F0:0x48 i = 2,
+ * F0:0x4c i = 3,
+ * F0:0x50 i = 4,
+ * F0:0x54 i = 5,
+ * F0:0x58 i = 6,
+ * F0:0x5c i = 7
+ * [ 0: 3] Request Route
+ * [0] Route to this node
+ * [1] Route to Link 0
+ * [2] Route to Link 1
+ * [3] Route to Link 2
+ * [11: 8] Response Route
+ * [0] Route to this node
+ * [1] Route to Link 0
+ * [2] Route to Link 1
+ * [3] Route to Link 2
+ * [19:16] Broadcast route
+ * [0] Route to this node
+ * [1] Route to Link 0
+ * [2] Route to Link 1
+ * [3] Route to Link 2
+ */
+ PCI_ADDR(0, 0x18, 0, 0x40), 0xfff0f0f0, 0x00010101,
+ PCI_ADDR(0, 0x18, 0, 0x44), 0xfff0f0f0, 0x00010101,
+ PCI_ADDR(0, 0x18, 0, 0x48), 0xfff0f0f0, 0x00010101,
+ PCI_ADDR(0, 0x18, 0, 0x4c), 0xfff0f0f0, 0x00010101,
+ PCI_ADDR(0, 0x18, 0, 0x50), 0xfff0f0f0, 0x00010101,
+ PCI_ADDR(0, 0x18, 0, 0x54), 0xfff0f0f0, 0x00010101,
+ PCI_ADDR(0, 0x18, 0, 0x58), 0xfff0f0f0, 0x00010101,
+ PCI_ADDR(0, 0x18, 0, 0x5c), 0xfff0f0f0, 0x00010101,
+
+ /* Hypetransport Transaction Control Register
+ * F0:0x68
+ * [ 0: 0] Disable read byte probe
+ * 0 = Probes issues
+ * 1 = Probes not issued
+ * [ 1: 1] Disable Read Doubleword probe
+ * 0 = Probes issued
+ * 1 = Probes not issued
+ * [ 2: 2] Disable write byte probes
+ * 0 = Probes issued
+ * 1 = Probes not issued
+ * [ 3: 3] Disable Write Doubleword Probes
+ * 0 = Probes issued
+ * 1 = Probes not issued.
+ * [ 4: 4] Disable Memroy Controller Target Start
+ * 0 = TgtStart packets are generated
+ * 1 = TgtStart packets are not generated.
+ * [ 5: 5] CPU1 Enable
+ * 0 = Second CPU disabled or not present
+ * 1 = Second CPU enabled.
+ * [ 6: 6] CPU Request PassPW
+ * 0 = CPU requests do not pass posted writes
+ * 1 = CPU requests pass posted writes.
+ * [ 7: 7] CPU read Respons PassPW
+ * 0 = CPU Responses do not pass posted writes
+ * 1 = CPU responses pass posted writes.
+ * [ 8: 8] Disable Probe Memory Cancel
+ * 0 = Probes may generate MemCancels
+ * 1 = Probes may not generate MemCancels
+ * [ 9: 9] Disable Remote Probe Memory Cancel.
+ * 0 = Probes hitting dirty blocks generate memory cancel packets
+ * 1 = Only probed caches on the same node as the memory controller
+ * generate cancel packets.
+ * [10:10] Disable Fill Probe
+ * 0 = Probes issued for cache fills
+ * 1 = Probes not issued for cache fills.
+ * [11:11] Response PassPw
+ * 0 = Downstream response PassPW based on original request
+ * 1 = Downstream response PassPW set to 1
+ * [12:12] Change ISOC to Ordered
+ * 0 = Bit 1 of coherent HT RdSz/WrSz command used for iosynchronous prioritization
+ * 1 = Bit 1 of coherent HT RdSz/WrSz command used for ordering.
+ * [14:13] Buffer Release Priority select
+ * 00 = 64
+ * 01 = 16
+ * 10 = 8
+ * 11 = 2
+ * [15:15] Limit Coherent HT Configuration Space Range
+ * 0 = No coherent HT configuration space restrictions
+ * 1 = Limit coherent HT configuration space based on node count
+ * [16:16] Local Interrupt Conversion Enable.
+ * 0 = ExtInt/NMI interrups unaffected.
+ * 1 = ExtInt/NMI broadcat interrupts converted to LINT0/1
+ * [17:17] APIC Extended Broadcast Enable.
+ * 0 = APIC broadcast is 0F
+ * 1 = APIC broadcast is FF
+ * [18:18] APIC Extended ID Enable
+ * 0 = APIC ID is 4 bits.
+ * 1 = APIC ID is 8 bits.
+ * [19:19] APIC Extended Spurious Vector Enable
+ * 0 = Lower 4 bits of spurious vector are read-only 1111
+ * 1 = Lower 4 bits of spurious vecotr are writeable.
+ * [20:20] Sequence ID Source Node Enable
+ * 0 = Normal operation
+ * 1 = Keep SeqID on routed packets for debugging.
+ * [22:21] Downstream non-posted request limit
+ * 00 = No limit
+ * 01 = Limited to 1
+ * 10 = Limited to 4
+ * 11 = Limited to 8
+ * [23:23] RESERVED
+ * [25:24] Medium-Priority Bypass Count
+ * - Maximum # of times a medium priority access can pass a low
+ * priority access before Medium-Priority mode is disabled for one access.
+ * [27:26] High-Priority Bypass Count
+ * - Maximum # of times a high prioirty access can pass a medium or low
+ * priority access before High-prioirty mode is disabled for one access.
+ * [28:28] Enable High Priority CPU Reads
+ * 0 = Cpu reads are medium prioirty
+ * 1 = Cpu reads are high prioirty
+ * [29:29] Disable Low Priority Writes
+ * 0 = Non-isochronous writes are low priority
+ * 1 = Non-isochronous writes are medium prioirty
+ * [30:30] Disable High Priority Isochronous writes
+ * 0 = Isochronous writes are high priority
+ * 1 = Isochronous writes are medium priority
+ * [31:31] Disable Medium Priority Isochronous writes
+ * 0 = Isochronous writes are medium are high
+ * 1 = With bit 30 set makes Isochrouns writes low priority.
+ */
+ PCI_ADDR(0, 0x18, 0, 0x68), 0x00800000, 0x0f00840f,
+ /* HT Initialization Control Register
+ * F0:0x6C
+ * [ 0: 0] Routing Table Disable
+ * 0 = Packets are routed according to routing tables
+ * 1 = Packets are routed according to the default link field
+ * [ 1: 1] Request Disable (BSP should clear this)
+ * 0 = Request packets may be generated
+ * 1 = Request packets may not be generated.
+ * [ 3: 2] Default Link (Read-only)
+ * 00 = LDT0
+ * 01 = LDT1
+ * 10 = LDT2
+ * 11 = CPU on same node
+ * [ 4: 4] Cold Reset
+ * - Scratch bit cleared by a cold reset
+ * [ 5: 5] BIOS Reset Detect
+ * - Scratch bit cleared by a cold reset
+ * [ 6: 6] INIT Detect
+ * - Scratch bit cleared by a warm or cold reset not by an INIT
+ *
+ */
+ PCI_ADDR(0, 0x18, 0, 0x6C), 0xffffff8c, 0x00000000 | (1 << 6) |(1 << 5)| (1 << 4),
+ /* LDTi Capabilities Registers
+ * F0:0x80 i = 0,
+ * F0:0xA0 i = 1,
+ * F0:0xC0 i = 2,
+ */
+ /* LDTi Link Control Registrs
+ * F0:0x84 i = 0,
+ * F0:0xA4 i = 1,
+ * F0:0xC4 i = 2,
+ * [ 1: 1] CRC Flood Enable
+ * 0 = Do not generate sync packets on CRC error
+ * 1 = Generate sync packets on CRC error
+ * [ 2: 2] CRC Start Test (Read-Only)
+ * [ 3: 3] CRC Force Frame Error
+ * 0 = Do not generate bad CRC
+ * 1 = Generate bad CRC
+ * [ 4: 4] Link Failure
+ * 0 = No link failure detected
+ * 1 = Link failure detected
+ * [ 5: 5] Initialization Complete
+ * 0 = Initialization not complete
+ * 1 = Initialization complete
+ * [ 6: 6] Receiver off
+ * 0 = Recevier on
+ * 1 = Receiver off
+ * [ 7: 7] Transmitter Off
+ * 0 = Transmitter on
+ * 1 = Transmitter off
+ * [ 9: 8] CRC_Error
+ * 00 = No error
+ * [0] = 1 Error on byte lane 0
+ * [1] = 1 Error on byte lane 1
+ * [12:12] Isochrnous Enable (Read-Only)
+ * [13:13] HT Stop Tristate Enable
+ * 0 = Driven during an LDTSTOP_L
+ * 1 = Tristated during and LDTSTOP_L
+ * [14:14] Extended CTL Time
+ * 0 = CTL is asserted for 16 bit times during link initialization
+ * 1 = CTL is asserted for 50us during link initialization
+ * [18:16] Max Link Width In (Read-Only?)
+ * 000 = 8 bit link
+ * 001 = 16bit link
+ * [19:19] Doubleword Flow Control in (Read-Only)
+ * 0 = This link does not support doubleword flow control
+ * 1 = This link supports doubleword flow control
+ * [22:20] Max Link Width Out (Read-Only?)
+ * 000 = 8 bit link
+ * 001 = 16bit link
+ * [23:23] Doubleworld Flow Control out (Read-Only)
+ * 0 = This link does not support doubleword flow control
+ * 1 = This link supports doubleworkd flow control
+ * [26:24] Link Width In
+ * 000 = Use 8 bits
+ * 001 = Use 16 bits
+ * 010 = reserved
+ * 011 = Use 32 bits
+ * 100 = Use 2 bits
+ * 101 = Use 4 bits
+ * 110 = reserved
+ * 111 = Link physically not connected
+ * [27:27] Doubleword Flow Control In Enable
+ * 0 = Doubleword flow control disabled
+ * 1 = Doubleword flow control enabled (Not currently supported)
+ * [30:28] Link Width Out
+ * 000 = Use 8 bits
+ * 001 = Use 16 bits
+ * 010 = reserved
+ * 011 = Use 32 bits
+ * 100 = Use 2 bits
+ * 101 = Use 4 bits
+ * 110 = reserved
+ * 111 = Link physically not connected
+ * [31:31] Doubleworld Flow Control Out Enable
+ * 0 = Doubleworld flow control disabled
+ * 1 = Doubleword flow control enabled (Not currently supported)
+ */
+ PCI_ADDR(0, 0x18, 0, 0x84), 0x00009c05, 0x11110020,
+ /* LDTi Frequency/Revision Registers
+ * F0:0x88 i = 0,
+ * F0:0xA8 i = 1,
+ * F0:0xC8 i = 2,
+ * [ 4: 0] Minor Revision
+ * Contains the HT Minor revision
+ * [ 7: 5] Major Revision
+ * Contains the HT Major revision
+ * [11: 8] Link Frequency (Takes effect the next time the link is reconnected)
+ * 0000 = 200Mhz
+ * 0001 = reserved
+ * 0010 = 400Mhz
+ * 0011 = reserved
+ * 0100 = 600Mhz
+ * 0101 = 800Mhz
+ * 0110 = 1000Mhz
+ * 0111 = reserved
+ * 1000 = reserved
+ * 1001 = reserved
+ * 1010 = reserved
+ * 1011 = reserved
+ * 1100 = reserved
+ * 1101 = reserved
+ * 1110 = reserved
+ * 1111 = 100 Mhz
+ * [15:12] Error (Not currently Implemented)
+ * [31:16] Indicates the frequency capabilities of the link
+ * [16] = 1 encoding 0000 of freq supported
+ * [17] = 1 encoding 0001 of freq supported
+ * [18] = 1 encoding 0010 of freq supported
+ * [19] = 1 encoding 0011 of freq supported
+ * [20] = 1 encoding 0100 of freq supported
+ * [21] = 1 encoding 0101 of freq supported
+ * [22] = 1 encoding 0110 of freq supported
+ * [23] = 1 encoding 0111 of freq supported
+ * [24] = 1 encoding 1000 of freq supported
+ * [25] = 1 encoding 1001 of freq supported
+ * [26] = 1 encoding 1010 of freq supported
+ * [27] = 1 encoding 1011 of freq supported
+ * [28] = 1 encoding 1100 of freq supported
+ * [29] = 1 encoding 1101 of freq supported
+ * [30] = 1 encoding 1110 of freq supported
+ * [31] = 1 encoding 1111 of freq supported
+ */
+ PCI_ADDR(0, 0x18, 0, 0x88), 0xfffff0ff, 0x00000200,
+ /* LDTi Feature Capability
+ * F0:0x8C i = 0,
+ * F0:0xAC i = 1,
+ * F0:0xCC i = 2,
+ */
+ /* LDTi Buffer Count Registers
+ * F0:0x90 i = 0,
+ * F0:0xB0 i = 1,
+ * F0:0xD0 i = 2,
+ */
+ /* LDTi Bus Number Registers
+ * F0:0x94 i = 0,
+ * F0:0xB4 i = 1,
+ * F0:0xD4 i = 2,
+ * For NonCoherent HT specifies the bus number downstream (behind the host bridge)
+ * [ 0: 7] Primary Bus Number
+ * [15: 8] Secondary Bus Number
+ * [23:15] Subordiante Bus Number
+ * [31:24] reserved
+ */
+ PCI_ADDR(0, 0x18, 0, 0x94), 0xff000000, 0x00ff0000,
+ /* LDTi Type Registers
+ * F0:0x98 i = 0,
+ * F0:0xB8 i = 1,
+ * F0:0xD8 i = 2,
+ */
+ /* Careful set limit registers before base registers which contain the enables */
+ /* DRAM Limit i Registers
+ * F1:0x44 i = 0
+ * F1:0x4C i = 1
+ * F1:0x54 i = 2
+ * F1:0x5C i = 3
+ * F1:0x64 i = 4
+ * F1:0x6C i = 5
+ * F1:0x74 i = 6
+ * F1:0x7C i = 7
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 7: 3] Reserved
+ * [10: 8] Interleave select
+ * specifies the values of A[14:12] to use with interleave enable.
+ * [15:11] Reserved
+ * [31:16] DRAM Limit Address i Bits 39-24
+ * This field defines the upper address bits of a 40 bit address
+ * that define the end of the DRAM region.
+ */
+#if MEMORY_1024MB
+ PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x003f0000,
+#endif
+#if MEMORY_512MB
+ PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x001f0000,
+#endif
+ PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
+ PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
+ PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
+ PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
+ PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
+ PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
+ PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
+ /* DRAM Base i Registers
+ * F1:0x40 i = 0
+ * F1:0x48 i = 1
+ * F1:0x50 i = 2
+ * F1:0x58 i = 3
+ * F1:0x60 i = 4
+ * F1:0x68 i = 5
+ * F1:0x70 i = 6
+ * F1:0x78 i = 7
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 7: 2] Reserved
+ * [10: 8] Interleave Enable
+ * 000 = No interleave
+ * 001 = Interleave on A[12] (2 nodes)
+ * 010 = reserved
+ * 011 = Interleave on A[12] and A[14] (4 nodes)
+ * 100 = reserved
+ * 101 = reserved
+ * 110 = reserved
+ * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
+ * [15:11] Reserved
+ * [13:16] DRAM Base Address i Bits 39-24
+ * This field defines the upper address bits of a 40-bit address
+ * that define the start of the DRAM region.
+ */
+ PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000003,
+#if MEMORY_1024MB
+ PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00400000,
+ PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00400000,
+ PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00400000,
+ PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00400000,
+ PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00400000,
+ PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00400000,
+ PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00400000,
+#endif
+#if MEMORY_512MB
+ PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00200000,
+ PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00200000,
+ PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00200000,
+ PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00200000,
+ PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00200000,
+ PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00200000,
+ PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00200000,
+#endif
+
+ /* Memory-Mapped I/O Limit i Registers
+ * F1:0x84 i = 0
+ * F1:0x8C i = 1
+ * F1:0x94 i = 2
+ * F1:0x9C i = 3
+ * F1:0xA4 i = 4
+ * F1:0xAC i = 5
+ * F1:0xB4 i = 6
+ * F1:0xBC i = 7
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 3: 3] Reserved
+ * [ 5: 4] Destination Link ID
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 = Reserved
+ * [ 6: 6] Reserved
+ * [ 7: 7] Non-Posted
+ * 0 = CPU writes may be posted
+ * 1 = CPU writes must be non-posted
+ * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
+ * This field defines the upp adddress bits of a 40-bit address that
+ * defines the end of a memory-mapped I/O region n
+ */
+ PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00e1ff00,
+ PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00dfff00,
+ PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00e3ff00,
+ PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000b00,
+ PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00fe0b00,
+
+ /* Memory-Mapped I/O Base i Registers
+ * F1:0x80 i = 0
+ * F1:0x88 i = 1
+ * F1:0x90 i = 2
+ * F1:0x98 i = 3
+ * F1:0xA0 i = 4
+ * F1:0xA8 i = 5
+ * F1:0xB0 i = 6
+ * F1:0xB8 i = 7
+ * [ 0: 0] Read Enable
+ * 0 = Reads disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes disabled
+ * 1 = Writes Enabled
+ * [ 2: 2] Cpu Disable
+ * 0 = Cpu can use this I/O range
+ * 1 = Cpu requests do not use this I/O range
+ * [ 3: 3] Lock
+ * 0 = base/limit registers i are read/write
+ * 1 = base/limit registers i are read-only
+ * [ 7: 4] Reserved
+ * [31: 8] Memory-Mapped I/O Base Address i (39-16)
+ * This field defines the upper address bits of a 40bit address
+ * that defines the start of memory-mapped I/O region i
+ */
+ PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00e00003,
+ PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00d80003,
+ PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00e20003,
+ PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000a03,
+#if MEMORY_1024MB
+ PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00400003,
+#endif
+#if MEMORY_512MB
+ PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00200003,
+#endif
+
+ /* PCI I/O Limit i Registers
+ * F1:0xC4 i = 0
+ * F1:0xCC i = 1
+ * F1:0xD4 i = 2
+ * F1:0xDC i = 3
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 3: 3] Reserved
+ * [ 5: 4] Destination Link ID
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 = reserved
+ * [11: 6] Reserved
+ * [24:12] PCI I/O Limit Address i
+ * This field defines the end of PCI I/O region n
+ * [31:25] Reserved
+ */
+ PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x0000d000,
+ PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x000ff000,
+ PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
+
+ /* PCI I/O Base i Registers
+ * F1:0xC0 i = 0
+ * F1:0xC8 i = 1
+ * F1:0xD0 i = 2
+ * F1:0xD8 i = 3
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 3: 2] Reserved
+ * [ 4: 4] VGA Enable
+ * 0 = VGA matches Disabled
+ * 1 = matches all address < 64K and where A[9:0] is in the
+ * range 3B0-3BB or 3C0-3DF independen of the base & limit registers
+ * [ 5: 5] ISA Enable
+ * 0 = ISA matches Disabled
+ * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
+ * from matching agains this base/limit pair
+ * [11: 6] Reserved
+ * [24:12] PCI I/O Base i
+ * This field defines the start of PCI I/O region n
+ * [31:25] Reserved
+ */
+ PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x0000d003,
+ PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00001013,
+ PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
+
+ /* Config Base and Limit i Registers
+ * F1:0xE0 i = 0
+ * F1:0xE4 i = 1
+ * F1:0xE8 i = 2
+ * F1:0xEC i = 3
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 2: 2] Device Number Compare Enable
+ * 0 = The ranges are based on bus number
+ * 1 = The ranges are ranges of devices on bus 0
+ * [ 3: 3] Reserved
+ * [ 6: 4] Destination Node
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 7: 7] Reserved
+ * [ 9: 8] Destination Link
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 - Reserved
+ * [15:10] Reserved
+ * [23:16] Bus Number Base i
+ * This field defines the lowest bus number in configuration region i
+ * [31:24] Bus Number Limit i
+ * This field defines the highest bus number in configuration regin i
+ */
+ PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003,
+ PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
+#endif
+ };
+ int i;
+ int max;
+ print_debug("setting up coherent ht domain....\r\n");
+ max = sizeof(register_values)/sizeof(register_values[0]);
+ for(i = 0; i < max; i += 3) {
+ unsigned long reg;
+#if 1
+ print_debug_hex32(register_values[i]);
+ print_debug(" <-");
+ print_debug_hex32(register_values[i+2]);
+ print_debug("\r\n");
+#endif
+#if 0
+ reg = pci_read_config32(register_values[i]);
+ reg &= register_values[i+1];
+ reg |= register_values[i+2] & ~register_values[i+1];
+ pci_write_config32(register_values[i], reg);
+#endif
+ }
+ print_debug("done.\r\n");
+}
+
+static void main(void)
+{
+ static const char msg[] = "hello world\r\n";
+#if 0
+ write(STDOUT_FILENO, msg, sizeof(msg));
+#endif
+#if 1
+ setup_coherent_ht_domain();
+#endif
+ _exit(0);
+}
projects / coreboot.git / blobdiff