int erase_sector_jedec(volatile unsigned char *bios, unsigned int page)
{
- volatile unsigned char *Temp;
-
/* Issue the Sector Erase command */
- Temp = bios + 0x5555; /* set up address to be BASE:5555h */
- *Temp = 0xAA; /* write data 0xAA to the address */
+ *(volatile char *) (bios + 0x5555) = 0xAA;
myusec_delay(10);
- Temp = bios + 0x2AAA; /* set up address to be BASE:2AAAh */
- *Temp = 0x55; /* write data 0x55 to the address */
+ *(volatile char *) (bios + 0x2AAA) = 0x55;
myusec_delay(10);
- Temp = bios + 0x5555; /* set up address to be BASE:5555h */
- *Temp = 0x80; /* write data 0x80 to the address */
+ *(volatile char *) (bios + 0x5555) = 0x80;
myusec_delay(10);
- Temp = bios + 0x5555; /* set up address to be BASE:5555h */
- *Temp = 0xAA; /* write data 0xAA to the address */
+
+ *(volatile char *) (bios + 0x5555) = 0xAA;
myusec_delay(10);
- Temp = bios + 0x2AAA; /* set up address to be BASE:2AAAh */
- *Temp = 0x55; /* write data 0x55 to the address */
+ *(volatile char *) (bios + 0x2AAA) = 0x55;
myusec_delay(10);
- Temp = bios + page; /* set up address to be the current sector */
- *Temp = 0x30; /* write data 0x30 to the address */
+ *(volatile char *) (bios + page) = 0x30;
myusec_delay(10);
/* wait for Toggle bit ready */
int erase_block_jedec(volatile unsigned char *bios, unsigned int block)
{
- volatile unsigned char *Temp;
-
/* Issue the Sector Erase command */
- Temp = bios + 0x5555; /* set up address to be BASE:5555h */
- *Temp = 0xAA; /* write data 0xAA to the address */
+ *(volatile char *) (bios + 0x5555) = 0xAA;
myusec_delay(10);
- Temp = bios + 0x2AAA; /* set up address to be BASE:2AAAh */
- *Temp = 0x55; /* write data 0x55 to the address */
+ *(volatile char *) (bios + 0x2AAA) = 0x55;
myusec_delay(10);
- Temp = bios + 0x5555; /* set up address to be BASE:5555h */
- *Temp = 0x80; /* write data 0x80 to the address */
+ *(volatile char *) (bios + 0x5555) = 0x80;
myusec_delay(10);
- Temp = bios + 0x5555; /* set up address to be BASE:5555h */
- *Temp = 0xAA; /* write data 0xAA to the address */
+
+ *(volatile char *) (bios + 0x5555) = 0xAA;
myusec_delay(10);
- Temp = bios + 0x2AAA; /* set up address to be BASE:2AAAh */
- *Temp = 0x55; /* write data 0x55 to the address */
+ *(volatile char *) (bios + 0x2AAA) = 0x55;
myusec_delay(10);
- Temp = bios + block; /* set up address to be the current sector */
- *Temp = 0x50; /* write data 0x30 to the address */
+ *(volatile char *) (bios + block) = 0x50;
myusec_delay(10);
/* wait for Toggle bit ready */
int erase_chip_jedec(struct flashchip *flash)
{
volatile unsigned char *bios = flash->virt_addr;
- volatile unsigned char *Temp;
/* Issue the JEDEC Chip Erase command */
- Temp = bios + 0x5555; /* set up address to be BASE:5555h */
- *Temp = 0xAA; /* write data 0xAA to the address */
+ *(volatile char *) (bios + 0x5555) = 0xAA;
myusec_delay(10);
- Temp = bios + 0x2AAA; /* set up address to be BASE:2AAAh */
- *Temp = 0x55; /* write data 0x55 to the address */
+ *(volatile char *) (bios + 0x2AAA) = 0x55;
myusec_delay(10);
- Temp = bios + 0x5555; /* set up address to be BASE:5555h */
- *Temp = 0x80; /* write data 0x80 to the address */
+ *(volatile char *) (bios + 0x5555) = 0x80;
myusec_delay(10);
- Temp = bios + 0x5555; /* set up address to be BASE:5555h */
- *Temp = 0xAA; /* write data 0xAA to the address */
+
+ *(volatile char *) (bios + 0x5555) = 0xAA;
myusec_delay(10);
- Temp = bios + 0x2AAA; /* set up address to be BASE:2AAAh */
- *Temp = 0x55; /* write data 0x55 to the address */
+ *(volatile char *) (bios + 0x2AAA) = 0x55;
myusec_delay(10);
- Temp = bios + 0x5555; /* set up address to be BASEy:5555h */
- *Temp = 0x10; /* write data 0x10 to the address */
+ *(volatile char *) (bios + 0x5555) = 0x10;
myusec_delay(10);
toggle_ready_jedec(bios);