--- /dev/null
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Platform Specific Memory Configuration
+ *
+ * Contains Definitions and Macros for control of AGESA Memory code on a per platform basis
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: OPTION
+ * @e \$Revision: 52513 $ @e \$Date: 2011-05-08 21:50:58 -0600 (Sun, 08 May 2011) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _PLATFORM_MEMORY_CONFIGURATION_H_
+#define _PLATFORM_MEMORY_CONFIGURATION_H_
+
+/*----------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+#ifndef PSO_ENTRY
+ #define PSO_ENTRY UINT8
+#endif
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------------------
+ * PLATFORM SPECIFIC MEMORY DEFINITIONS
+ *----------------------------------------------------------------------------------------
+ */
+///
+/// Memory Speed and DIMM Population Masks
+///
+///< DDR Speed Masks
+///< Specifies the DDR Speed on a memory channel
+///
+#define ANY_SPEED 0xFFFFFFFF
+#define DDR400 ((UINT32) 1 << (DDR400_FREQUENCY / 66))
+#define DDR533 ((UINT32) 1 << (DDR533_FREQUENCY / 66))
+#define DDR667 ((UINT32) 1 << (DDR667_FREQUENCY / 66))
+#define DDR800 ((UINT32) 1 << (DDR800_FREQUENCY / 66))
+#define DDR1066 ((UINT32) 1 << (DDR1066_FREQUENCY / 66))
+#define DDR1333 ((UINT32) 1 << (DDR1333_FREQUENCY / 66))
+#define DDR1600 ((UINT32) 1 << (DDR1600_FREQUENCY / 66))
+#define DDR1866 ((UINT32) 1 << (DDR1866_FREQUENCY / 66))
+#define DDR2133 ((UINT32) 1 << (DDR2133_FREQUENCY / 66))
+#define DDR2400 ((UINT32) 1 << (DDR2400_FREQUENCY / 66))
+///
+///< DIMM POPULATION MASKS
+///< Specifies the DIMM Population on a channel (can be added together to specify configuration).
+///< ex. SR_DIMM0 + SR_DIMM1 : Single Rank Dimm in slot 0 AND Slot 1
+///< SR_DIMM0 + DR_DIMM0 + SR_DIMM1 +DR_DIMM1 : Single OR Dual rank in Slot 0 AND Single OR Dual rank in Slot 1
+///
+#define ANY_ 0xFF ///< Any dimm configuration the current channel
+#define SR_DIMM0 0x0001 ///< Single rank dimm in slot 0 on the current channel
+#define SR_DIMM1 0x0010 ///< Single rank dimm in slot 1 on the current channel
+#define SR_DIMM2 0x0100 ///< Single rank dimm in slot 2 on the current channel
+#define SR_DIMM3 0x1000 ///< Single rank dimm in slot 3 on the current channel
+#define DR_DIMM0 0x0002 ///< Dual rank dimm in slot 0 on the current channel
+#define DR_DIMM1 0x0020 ///< Dual rank dimm in slot 1 on the current channel
+#define DR_DIMM2 0x0200 ///< Dual rank dimm in slot 2 on the current channel
+#define DR_DIMM3 0x2000 ///< Dual rank dimm in slot 3 on the current channel
+#define QR_DIMM0 0x0004 ///< Quad rank dimm in slot 0 on the current channel
+#define QR_DIMM1 0x0040 ///< Quad rank dimm in slot 1 on the current channel
+#define QR_DIMM2 0x0400 ///< Quad rank dimm in slot 2 on the current channel
+#define QR_DIMM3 0x4000 ///< Quad rank dimm in slot 3 on the current channel
+#define LR_DIMM0 0x0001 ///< Lrdimm in slot 0 on the current channel
+#define LR_DIMM1 0x0010 ///< Lrdimm in slot 1 on the current channel
+#define LR_DIMM2 0x0100 ///< Lrdimm in slot 2 on the current channel
+#define LR_DIMM3 0x1000 ///< Lrdimm in slot 3 on the current channel
+#define ANY_DIMM0 0x000F ///< Any Dimm combination in slot 0 on the current channel
+#define ANY_DIMM1 0x00F0 ///< Any Dimm combination in slot 1 on the current channel
+#define ANY_DIMM2 0x0F00 ///< Any Dimm combination in slot 2 on the current channel
+#define ANY_DIMM3 0xF000 ///< Any Dimm combination in slot 3 on the current channel
+///
+///< CS POPULATION MASKS
+///< Specifies the CS Population on a channel (can be added together to specify configuration).
+///< ex. CS0 + CS1 : CS0 and CS1 apply to the setting
+///
+#define CS_ANY_ 0xFF ///< Any CS configuration
+#define CS0_ 0x01 ///< CS0 bit map mask
+#define CS1_ 0x02 ///< CS1 bit map mask
+#define CS2_ 0x04 ///< CS2 bit map mask
+#define CS3_ 0x08 ///< CS3 bit map mask
+#define CS4_ 0x10 ///< CS4 bit map mask
+#define CS5_ 0x20 ///< CS5 bit map mask
+#define CS6_ 0x40 ///< CS6 bit map mask
+#define CS7_ 0x80 ///< CS7 bit map mask
+///
+///< Number of Dimms on the current channel
+///< This is a mask used to indicate the number of dimms in a channel
+///< They can be added to indicate multiple conditions (i.e 1 OR 2 Dimms)
+///
+#define ANY_NUM 0xFF ///< Any number of Dimms
+#define NO_DIMM 0x00 ///< No Dimms present
+#define ONE_DIMM 0x01 ///< One dimm Poulated on the current channel
+#define TWO_DIMM 0x02 ///< Two dimms Poulated on the current channel
+#define THREE_DIMM 0x04 ///< Three dimms Poulated on the current channel
+#define FOUR_DIMM 0x08 ///< Four dimms Poulated on the current channel
+
+///
+///< DIMM VOLTAGE MASKS
+///
+#define VOLT_ANY_ 0xFF ///< Any voltage configuration
+#define VOLT1_5_ 0x01 ///< Voltage 1.5V bit map mask
+#define VOLT1_35_ 0x02 ///< Voltage 1.35V bit map mask
+#define VOLT1_25_ 0x04 ///< Voltage 1.25V bit map mask
+
+//
+// < Not applicable
+//
+#define NA_ 0 ///< Not applicable
+
+/*----------------------------------------------------------------------------------------
+ *
+ * Platform Specific Override Definitions for Socket, Channel and Dimm
+ * This indicates where a platform override will be applied.
+ *
+ *----------------------------------------------------------------------------------------
+ */
+///
+///< SOCKET MASKS
+///< Indicates associated processor sockets to apply override settings
+///
+#define ANY_SOCKET 0xFF ///< Apply to all sockets
+#define SOCKET0 0x01 ///< Apply to socket 0
+#define SOCKET1 0x02 ///< Apply to socket 1
+#define SOCKET2 0x04 ///< Apply to socket 2
+#define SOCKET3 0x08 ///< Apply to socket 3
+#define SOCKET4 0x10 ///< Apply to socket 4
+#define SOCKET5 0x20 ///< Apply to socket 5
+#define SOCKET6 0x40 ///< Apply to socket 6
+#define SOCKET7 0x80 ///< Apply to socket 7
+///
+///< CHANNEL MASKS
+///< Indicates Memory channels where override should be applied
+///
+#define ANY_CHANNEL 0xFF ///< Apply to all Memory channels
+#define CHANNEL_A 0x01 ///< Apply to Channel A
+#define CHANNEL_B 0x02 ///< Apply to Channel B
+#define CHANNEL_C 0x04 ///< Apply to Channel C
+#define CHANNEL_D 0x08 ///< Apply to Channel D
+///
+/// DIMM MASKS
+/// Indicates Dimm Slots where override should be applied
+///
+#define ALL_DIMMS 0xFF ///< Apply to all dimm slots
+#define DIMM0 0x01 ///< Apply to Dimm Slot 0
+#define DIMM1 0x02 ///< Apply to Dimm Slot 1
+#define DIMM2 0x04 ///< Apply to Dimm Slot 2
+#define DIMM3 0x08 ///< Apply to Dimm Slot 3
+///
+/// REGISTER ACCESS MASKS
+/// Not supported as an at this time
+///
+#define ACCESS_NB0 0x0
+#define ACCESS_NB1 0x1
+#define ACCESS_NB2 0x2
+#define ACCESS_NB3 0x3
+#define ACCESS_NB4 0x4
+#define ACCESS_PHY 0x5
+#define ACCESS_DCT_XT 0x6
+/*----------------------------------------------------------------------------------------
+ *
+ * Platform Specific Overriding Table Definitions
+ *
+ *----------------------------------------------------------------------------------------
+ */
+
+#define PSO_END 0 ///< Table End
+#define PSO_CKE_TRI 1 ///< CKE Tristate Map
+#define PSO_ODT_TRI 2 ///< ODT Tristate Map
+#define PSO_CS_TRI 3 ///< CS Tristate Map
+#define PSO_MAX_DIMMS 4 ///< Max Dimms per channel
+#define PSO_CLK_SPEED 5 ///< Clock Speed
+#define PSO_DIMM_TYPE 6 ///< Dimm Type
+#define PSO_MEMCLK_DIS 7 ///< MEMCLK Disable Map
+#define PSO_MAX_CHNLS 8 ///< Max Channels per Socket
+#define PSO_BUS_SPEED 9 ///< Max Memory Bus Speed
+#define PSO_MAX_CHIPSELS 10 ///< Max Chipsel per Channel
+#define PSO_MEM_TECH 11 ///< Channel Memory Type
+#define PSO_WL_SEED 12 ///< DDR3 Write Levelization Seed delay
+#define PSO_RXEN_SEED 13 ///< Hardwared based RxEn seed
+#define PSO_NO_LRDIMM_CS67_ROUTING 14 ///< CS6 and CS7 are not Routed to all Memoy slots on a channel for LRDIMMs
+#define PSO_SOLDERED_DOWN_SODIMM_TYPE 15 ///< Soldered down SODIMM type
+#define PSO_LVDIMM_VOLT1_5_SUPPORT 16 ///< Force LvDimm voltage to 1.5V
+#define PSO_MIN_RD_WR_DATAEYE_WIDTH 17 ///< Min RD/WR dataeye width
+#define PSO_CPU_FAMILY_TO_OVERRIDE 18 ///< CPU family signature to tell following PSO macros are CPU family dependent
+
+/*----------------------------------
+ * CONDITIONAL PSO SPECIFIC ENTRIES
+ *---------------------------------*/
+// Condition Types
+#define CONDITIONAL_PSO_MIN 100 ///< Start of Conditional Entry Types
+#define PSO_CONDITION_AND 100 ///< And Block - Start of Conditional block
+#define PSO_CONDITION_LOC 101 ///< Location - Specify Socket, Channel, Dimms to be affected
+#define PSO_CONDITION_SPD 102 ///< SPD - Specify a specific SPD value on a Dimm on the channel
+#define PSO_CONDITION_REG 103 // Reserved
+#define PSO_CONDITION_MAX 103 ///< End Of Condition Entry Types
+// Action Types
+#define PSO_ACTION_MIN 120 ///< Start of Action Entry Types
+#define PSO_ACTION_ODT 120 ///< ODT values to override
+#define PSO_ACTION_ADDRTMG 121 ///< Address/Timing values to override
+#define PSO_ACTION_ODCCONTROL 122 ///< ODC Control values to override
+#define PSO_ACTION_SLEWRATE 123 ///< Slew Rate value to override
+#define PSO_ACTION_REG 124 // Reserved
+#define PSO_ACTION_SPEEDLIMIT 125 ///< Memory Bus speed Limit based on configuration
+#define PSO_ACTION_MAX 125 ///< End of Action Entry Types
+#define CONDITIONAL_PSO_MAX 139 ///< End of Conditional Entry Types
+
+/*----------------------------------
+ * TABLE DRIVEN PSO SPECIFIC ENTRIES
+ *---------------------------------*/
+// Condition descriptor
+#define PSO_TBLDRV_CONFIG 200 ///< Configuration Descriptor
+
+// Overriding entry types
+#define PSO_TBLDRV_START 210 ///< Start of Table Driven Overriding Entry Types
+#define PSO_TBLDRV_SPEEDLIMIT 210 ///< Speed Limit
+#define PSO_TBLDRV_ODT_RTTNOM 211 ///< RttNom
+#define PSO_TBLDRV_ODT_RTTWR 212 ///< RttWr
+#define PSO_TBLDRV_ODTPATTERN 213 ///< Odt Patterns
+#define PSO_TBLDRV_ADDRTMG 214 ///< Address/Timing values
+#define PSO_TBLDRV_ODCCTRL 215 ///< ODC Control values
+#define PSO_TBLDRV_SLOWACCMODE 216 ///< Slow Access Mode
+#define PSO_TBLDRV_MR0_CL 217 ///< MR0[CL]
+#define PSO_TBLDRV_MR0_WR 218 ///< MR0[WR]
+#define PSO_TBLDRV_RC2_IBT 219 ///< RC2[IBT]
+#define PSO_TBLDRV_RC10_OPSPEED 220 ///< RC10[Opearting Speed]
+#define PSO_TBLDRV_LRDIMM_IBT 221 ///< LrDIMM IBT
+#define PSO_TBLDRV____TRAINING 222 ///< training
+#define PSO_TBLDRV_INVALID_TYPE 223 ///< Invalid Type
+#define PSO_TBLDRV_END 223 ///< End of Table Driven Overriding Entry Types
+
+/*----------------------------------------------------------------------------------------
+ * CONDITIONAL OVERRIDE TABLE MACROS
+ *----------------------------------------------------------------------------------------
+ */
+#define CPU_FAMILY_TO_OVERRIDE(CpuFamilyRevision) \
+ PSO_CPU_FAMILY_TO_OVERRIDE, 4, \
+ ((CpuFamilyRevision) & 0x0FF), (((CpuFamilyRevision) >> 8)& 0x0FF), (((CpuFamilyRevision) >> 16)& 0x0FF), (((CpuFamilyRevision) >> 24)& 0x0FF)
+
+#define MEMCLK_DIS_MAP(SocketID, ChannelID, Bit0Map, Bit1Map, Bit2Map, Bit3Map, Bit4Map, Bit5Map, Bit6Map, Bit7Map) \
+ PSO_MEMCLK_DIS, 11, SocketID, ChannelID, ALL_DIMMS, Bit0Map, Bit1Map, Bit2Map, Bit3Map, Bit4Map, Bit5Map, Bit6Map \
+ , Bit7Map
+
+#define CKE_TRI_MAP(SocketID, ChannelID, Bit0Map, Bit1Map) \
+ PSO_CKE_TRI, 5, SocketID, ChannelID, ALL_DIMMS, Bit0Map, Bit1Map
+
+#define ODT_TRI_MAP(SocketID, ChannelID, Bit0Map, Bit1Map, Bit2Map, Bit3Map) \
+ PSO_ODT_TRI, 7, SocketID, ChannelID, ALL_DIMMS, Bit0Map, Bit1Map, Bit2Map, Bit3Map
+
+#define CS_TRI_MAP(SocketID, ChannelID, Bit0Map, Bit1Map, Bit2Map, Bit3Map, Bit4Map, Bit5Map, Bit6Map, Bit7Map) \
+ PSO_CS_TRI, 11, SocketID, ChannelID, ALL_DIMMS, Bit0Map, Bit1Map, Bit2Map, Bit3Map, Bit4Map, Bit5Map, Bit6Map, Bit7Map
+
+#define NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) \
+ PSO_MAX_DIMMS, 4, SocketID, ChannelID, ALL_DIMMS, NumberOfDimmSlotsPerChannel
+
+#define NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) \
+ PSO_MAX_CHIPSELS, 4, SocketID, ChannelID, ALL_DIMMS, NumberOfChipSelectsPerChannel
+
+#define NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) \
+ PSO_MAX_CHNLS, 4, SocketID, ANY_CHANNEL, ALL_DIMMS, NumberOfChannelsPerSocket
+
+#define OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, TimingMode, BusSpeed) \
+ PSO_BUS_SPEED, 11, SocketID, ChannelID, ALL_DIMMS, TimingMode, (TimingMode >> 8), (TimingMode >> 16), (TimingMode >> 24), \
+ BusSpeed, (BusSpeed >> 8), (BusSpeed >> 16), (BusSpeed >> 24)
+
+#define DRAM_TECHNOLOGY(SocketID, MemTechType) \
+ PSO_MEM_TECH, 7, SocketID, ANY_CHANNEL, ALL_DIMMS, MemTechType, (MemTechType >> 8), (MemTechType >> 16), (MemTechType >> 24)
+
+#define WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, \
+ Byte6Seed, Byte7Seed, ByteEccSeed) \
+ PSO_WL_SEED, 12, SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, \
+ Byte6Seed, Byte7Seed, ByteEccSeed
+
+#define HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, \
+ Byte6Seed, Byte7Seed, ByteEccSeed) \
+ PSO_RXEN_SEED, 21, SocketID, ChannelID, DimmID, Byte0Seed, (Byte0Seed >> 8), Byte1Seed, (Byte1Seed >> 8), Byte2Seed, (Byte2Seed >> 8), \
+ Byte3Seed, (Byte3Seed >> 8), Byte4Seed, (Byte4Seed >> 8), Byte5Seed, (Byte5Seed >> 8), Byte6Seed, (Byte6Seed >> 8), \
+ Byte7Seed, (Byte7Seed >> 8), ByteEccSeed, (ByteEccSeed >> 8)
+
+#define NO_LRDIMM_CS67_ROUTING(SocketID, ChannelID) \
+ PSO_NO_LRDIMM_CS67_ROUTING, 4, SocketID, ChannelID, ALL_DIMMS, TRUE
+
+#define SOLDERED_DOWN_SODIMM_TYPE(SocketID, ChannelID) \
+ PSO_SOLDERED_DOWN_SODIMM_TYPE, 4, SocketID, ChannelID, ALL_DIMMS, TRUE
+
+#define LVDIMM_FORCE_VOLT1_5_FOR_D0 \
+ PSO_LVDIMM_VOLT1_5_SUPPORT, 4, ANY_SOCKET, ANY_CHANNEL, ALL_DIMMS, TRUE
+
+#define MIN_RD_WR_DATAEYE_WIDTH(SocketID, ChannelID, MinRdDataeyeWidth, MinWrDataeyeWidth) \
+ PSO_MIN_RD_WR_DATAEYE_WIDTH, 5, SocketID, ChannelID, ALL_DIMMS, MinRdDataeyeWidth, MinWrDataeyeWidth
+
+/*----------------------------------------------------------------------------------------
+ * CONDITIONAL OVERRIDE TABLE MACROS
+ *----------------------------------------------------------------------------------------
+ */
+#define CONDITION_AND \
+ PSO_CONDITION_AND, 0
+
+#define COND_LOC(SocketMsk, ChannelMsk, DimmMsk) \
+ PSO_CONDITION_LOC, 3, SocketMsk, ChannelMsk, DimmMsk
+
+#define COND_SPD(Byte, Mask, Value) \
+ PSO_CONDITION_SPD, 3, Byte, Mask, Value
+
+#define COND_REG(Access, Offset, Mask, Value) \
+ PSO_CONDITION_REG, 11, Access, (Offset & 0x0FF), (Offset >> 8), \
+ ((Mask) & 0x0FF), (((Mask) >> 8) & 0x0FF), (((Mask) >> 16) & 0x0FF), (((Mask) >> 24) & 0x0FF), \
+ ((Value) & 0x0FF), (((Value) >> 8) & 0x0FF), (((Value) >> 16) & 0x0FF), (((Value) >> 24) & 0x0FF)
+
+#define ACTION_ODT(Frequency, Dimms, QrDimms, DramOdt, QrDramOdt, DramDynOdt) \
+ PSO_ACTION_ODT, 9, \
+ ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), ((Frequency >> 24)& 0x0FF), \
+ Dimms, QrDimms, DramOdt, QrDramOdt, DramDynOdt
+
+#define ACTION_ADDRTMG(Frequency, DimmConfig, AddrTmg) \
+ PSO_ACTION_ADDRTMG, 10, \
+ ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \
+ ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), \
+ (AddrTmg & 0x0FF), ((AddrTmg >> 8)& 0x0FF), ((AddrTmg >> 16)& 0x0FF), ((AddrTmg >> 24)& 0x0FF)
+
+#define ACTION_ODCCTRL(Frequency, DimmConfig, OdcCtrl) \
+ PSO_ACTION_ODCCONTROL, 10, \
+ ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \
+ ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), \
+ (OdcCtrl & 0x0FF), ((OdcCtrl >> 8)& 0x0FF), ((OdcCtrl >> 16)& 0x0FF), ((OdcCtrl >> 24)& 0x0FF)
+
+#define ACTION_SLEWRATE(Frequency, DimmConfig, SlewRate) \
+ PSO_ACTION_SLEWRATE, 10, \
+ ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \
+ ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), \
+ (SlewRate & 0x0FF), ((SlewRate >> 8)& 0x0FF), ((SlewRate >> 16)& 0x0FF), ((SlewRate >> 24)& 0x0FF)
+
+#define ACTION_SPEEDLIMIT(DimmConfig, Dimms, SpeedLimit15, SpeedLimit135, SpeedLimit125) \
+ PSO_ACTION_SPEEDLIMIT, 9, \
+ ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), Dimms, \
+ (SpeedLimit15 & 0x0FF), ((SpeedLimit15 >> 8)& 0x0FF), \
+ (SpeedLimit135 & 0x0FF), ((SpeedLimit135 >> 8)& 0x0FF), \
+ (SpeedLimit125 & 0x0FF), ((SpeedLimit125 >> 8)& 0x0FF)
+
+/*----------------------------------------------------------------------------------------
+ * END OF CONDITIONAL OVERRIDE TABLE MACROS
+ *----------------------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------------------
+ * TABLE DRIVEN OVERRIDE MACROS
+ *----------------------------------------------------------------------------------------
+ */
+/// Configuration sub-descriptors
+typedef enum {
+ CONFIG_GENERAL, ///< CONFIG_GENERAL
+ CONFIG_SPEEDLIMIT, ///< CONFIG_SPEEDLIMIT
+ CONFIG_RC2IBT, ///< CONFIG_RC2IBT
+ CONFIG_DONT_CARE, ///< CONFIG_DONT_CARE
+} Config_Type;
+
+// ====================
+// Configuration Macros
+// ====================
+#define TBLDRV_CONFIG_TO_OVERRIDE(DimmPerCH, Frequency, DimmVolt, DimmConfig) \
+ PSO_TBLDRV_CONFIG, 9, \
+ CONFIG_GENERAL, \
+ DimmPerCH, DimmVolt, \
+ ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \
+ ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF)
+
+#define TBLDRV_SPEEDLIMIT_CONFIG_TO_OVERRIDE(DimmPerCH, Dimms, NumOfSR, NumOfDR, NumOfQR, NumOfLRDimm) \
+ PSO_TBLDRV_CONFIG, 7, \
+ CONFIG_SPEEDLIMIT, \
+ DimmPerCH, Dimms, NumOfSR, NumOfDR, NumOfQR, NumOfLRDimm
+
+#define TBLDRV_RC2IBT_CONFIG_TO_OVERRIDE(DimmPerCH, Frequency, DimmVolt, DimmConfig, NumOfReg) \
+ PSO_TBLDRV_CONFIG, 10, \
+ CONFIG_RC2IBT, \
+ DimmPerCH, DimmVolt, \
+ ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \
+ ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), \
+ NumOfReg
+
+//==================
+// Overriding Macros
+//==================
+#define TBLDRV_CONFIG_ENTRY_SPEEDLIMIT(SpeedLimit1_5, SpeedLimit1_35, SpeedLimit1_25) \
+ PSO_TBLDRV_SPEEDLIMIT, 6, \
+ (SpeedLimit1_5 & 0x0FF), ((SpeedLimit1_5 >> 8)& 0x0FF), \
+ (SpeedLimit1_35 & 0x0FF), ((SpeedLimit1_35 >> 8)& 0x0FF), \
+ (SpeedLimit1_25 & 0x0FF), ((SpeedLimit1_25 >> 8)& 0x0FF)
+
+#define TBLDRV_CONFIG_ENTRY_ODT_RTTNOM(TgtCS, RttNom) \
+ PSO_TBLDRV_ODT_RTTNOM, 2, \
+ TgtCS, RttNom
+
+#define TBLDRV_CONFIG_ENTRY_ODT_RTTWR(TgtCS, RttWr) \
+ PSO_TBLDRV_ODT_RTTWR, 2, \
+ TgtCS, RttWr
+
+#define TBLDRV_CONFIG_ENTRY_ODTPATTERN(RdODTCSHigh, RdODTCSLow, WrODTCSHigh, WrODTCSLow) \
+ PSO_TBLDRV_ODTPATTERN, 16, \
+ ((RdODTCSHigh) & 0x0FF), (((RdODTCSHigh) >> 8)& 0x0FF), (((RdODTCSHigh) >> 16)& 0x0FF), (((RdODTCSHigh) >> 24)& 0x0FF), \
+ ((RdODTCSLow) & 0x0FF), (((RdODTCSLow) >> 8)& 0x0FF), (((RdODTCSLow) >> 16)& 0x0FF), (((RdODTCSLow) >> 24)& 0x0FF), \
+ ((WrODTCSHigh) & 0x0FF), (((WrODTCSHigh) >> 8)& 0x0FF), (((WrODTCSHigh) >> 16)& 0x0FF), (((WrODTCSHigh) >> 24)& 0x0FF), \
+ ((WrODTCSLow) & 0x0FF), (((WrODTCSLow) >> 8)& 0x0FF), (((WrODTCSLow) >> 16)& 0x0FF), (((WrODTCSLow) >> 24)& 0x0FF)
+
+#define TBLDRV_CONFIG_ENTRY_ADDRTMG(AddrTmg) \
+ PSO_TBLDRV_ADDRTMG, 4, \
+ ((AddrTmg) & 0x0FF), (((AddrTmg) >> 8)& 0x0FF), (((AddrTmg) >> 16)& 0x0FF), (((AddrTmg) >> 24)& 0x0FF)
+
+#define TBLDRV_CONFIG_ENTRY_ODCCTRL(OdcCtrl) \
+ PSO_TBLDRV_ODCCTRL, 4, \
+ ((OdcCtrl) & 0x0FF), (((OdcCtrl) >> 8)& 0x0FF), (((OdcCtrl) >> 16)& 0x0FF), (((OdcCtrl) >> 24)& 0x0FF)
+
+#define TBLDRV_CONFIG_ENTRY_SLOWACCMODE(SlowAccMode) \
+ PSO_TBLDRV_SLOWACCMODE, 1, \
+ SlowAccMode
+
+#define TBLDRV_CONFIG_ENTRY_RC2_IBT(TgtDimm, IBT) \
+ PSO_TBLDRV_RC2_IBT, 2, \
+ TgtDimm, IBT
+
+#define TBLDRV_OVERRIDE_MR0_CL(RegValOfTcl, MR0CL13, MR0CL0) \
+ PSO_TBLDRV_CONFIG, 1, \
+ CONFIG_DONT_CARE, \
+ PSO_TBLDRV_MR0_CL, 3, \
+ RegValOfTcl, MR0CL13, MR0CL0
+
+#define TBLDRV_OVERRIDE_MR0_WR(RegValOfTwr, MR0WR) \
+ PSO_TBLDRV_CONFIG, 1, \
+ CONFIG_DONT_CARE, \
+ PSO_TBLDRV_MR0_WR, 2, \
+ RegValOfTwr, MR0WR
+
+#define TBLDRV_OVERRIDE_RC10_OPSPEED(Frequency, MR10OPSPEED) \
+ PSO_TBLDRV_CONFIG, 1, \
+ CONFIG_DONT_CARE, \
+ PSO_TBLDRV_RC10_OPSPEED, 5, \
+ ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \
+ MR10OPSPEED
+
+#define TBLDRV_CONFIG_ENTRY_LRDMM_IBT(F0RC8, F1RC0, F1RC1, F1RC2) \
+ PSO_TBLDRV_LRDIMM_IBT, 4, \
+ F0RC8, F1RC0, F1RC1, F1RC2
+
+#define TBLDRV_CONFIG_ENTRY____TRAINING(Training__Mode) \
+ PSO_TBLDRV____TRAINING, 1, \
+ Training__Mode
+
+//============================
+// Macros for removing entries
+//============================
+#define INVALID_CONFIG_FLAG 0x8000
+
+#define TBLDRV_INVALID_CONFIG \
+ PSO_TBLDRV_INVALID_TYPE, 0
+
+/*----------------------------------------------------------------------------------------
+ * END OF TABLE DRIVEN OVERRIDE MACROS
+ *----------------------------------------------------------------------------------------
+ */
+
+#endif // _PLATFORM_MEMORY_CONFIGURATION_H_
projects / coreboot.git / blobdiff