Add support for ITE IT8772F SuperI/O chip
[coreboot.git] / src / superio / ite / it8772f / it8772f.h
diff --git a/src/superio/ite/it8772f/it8772f.h b/src/superio/ite/it8772f/it8772f.h
new file mode 100644 (file)
index 0000000..1ec82e1
--- /dev/null
@@ -0,0 +1,120 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 The ChromiumOS Authors.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#ifndef SUPERIO_ITE_IT8772F_IT8772F_H
+#define SUPERIO_ITE_IT8772F_IT8772F_H
+
+#define IT8772F_BASE 0x2e
+
+#define IT8772F_FDC  0x00 /* Floppy disk controller */
+#define IT8772F_SP1  0x01 /* Com1 */
+#define IT8772F_EC   0x04 /* Environment controller */
+#define IT8772F_KBCK 0x05 /* Keyboard */
+#define IT8772F_KBCM 0x06 /* Mouse */
+#define IT8772F_GPIO 0x07 /* GPIO */
+#define IT8772F_IR   0x0a /* Consumer IR */
+
+/* Environmental Controller interface */
+#define IT8772F_INTERFACE_SELECT               0x0a
+#define  IT8772F_INTERFACE_PSEUDO_EOC          (1 << 7)
+#define  IT8772F_INTERFACE_SMB_ENABLE          (1 << 6)
+#define  IT8772F_INTERFACE_SEL_DISABLE         (0 << 4)
+#define  IT8772F_INTERFACE_SEL_SST_SLAVE       (1 << 4)
+#define  IT8772F_INTERFACE_SEL_PECI            (2 << 4)
+#define  IT8772F_INTERFACE_SEL_SST_HOST                (3 << 4)
+#define  IT8772F_INTERFACE_CLOCK_32MHZ         (0 << 3)
+#define  IT8772F_INTERFACE_CLOCK_24MHZ         (1 << 3)
+#define  IT8772F_INTERFACE_SPEED_TOLERANCE     (1 << 2)
+#define  IT8772F_INTERFACE_PECI_AWFCS          (1 << 0)
+#define IT8772F_FAN_TAC2_READ                  0x0e
+#define IT8772F_FAN_TAC3_READ                  0x0f
+#define IT8772F_FAN_MAIN_CTL                   0x13
+#define  IT8772F_FAN_MAIN_CTL_TAC_SMART(x)     (1 << ((x)-1))
+#define  IT8772F_FAN_MAIN_CTL_TAC_EN(x)                (1 << ((x)+3))
+#define IT8772F_FAN_CTL_MODE                   0x14
+#define  IT8772F_FAN_CTL_ON(x)                 (1 << ((x)-1))
+#define  IT8772F_FAN_PWM_MIN_DUTY              (1 << 3)
+#define  IT8772F_FAN_PWM_CLOCK_48MHZ           (0 << 4)
+#define  IT8772F_FAN_PWM_CLOCK_24MHZ           (1 << 4)
+#define  IT8772F_FAN_PWM_CLOCK_8MHZ            (3 << 4)
+#define  IT8772F_FAN_PWM_CLOCK_6MHZ            (4 << 4)
+#define  IT8772F_FAN_PWM_CLOCK_3MHZ            (5 << 4)
+#define  IT8772F_FAN_PWM_CLOCK_1_5MHZ          (6 << 4)
+#define  IT8772F_FAN_PWM_CLOCK_51KHZ           (7 << 4)
+#define  IT8772F_FAN_CTL_POLARITY_LOW          (0 << 7)
+#define  IT8772F_FAN_CTL_POLARITY_HIGH         (1 << 7)
+#define IT8772F_FAN_CTL2_PWM_MODE              0x16
+#define IT8772F_FAN_CTL3_PWM_MODE              0x17
+#define  IT8772F_FAN_CTL_PWM_MODE_SOFTWARE     (0 << 7)
+#define  IT8772F_FAN_CTL_PWM_MODE_AUTOMATIC    (1 << 7)
+#define IT8772F_ADC_TEMP_CHANNEL_ENABLE                0x51
+#define IT8772F_FAN_CTL2_PWM_START             0x6b
+#define IT8772F_FAN_CTL2_AUTO_MODE             0x6c
+#define IT8772F_FAN_CTL3_PWM_START             0x73
+#define IT8772F_FAN_CTL3_AUTO_MODE             0x74
+#define  IT8772F_FAN_CTL_AUTO_SMOOTHING_DIS    (0 << 7)
+#define  IT8772F_FAN_CTL_AUTO_SMOOTHING_EN     (1 << 7)
+#define IT8772F_EXTEMP_STATUS                  0x88
+#define IT8772F_EXTEMP_ADDRESS                 0x89
+#define IT8772F_EXTEMP_WRITE_LENGTH            0x8a
+#define IT8772F_EXTEMP_READ_LENGTH             0x8b
+#define IT8772F_EXTEMP_COMMAND                 0x8c
+#define IT8772F_EXTEMP_WRITE_DATA_2            0x8d
+#define IT8772F_EXTEMP_CONTROL                 0x8e
+#define  IT8772F_EXTEMP_CONTROL_AUTO_32HZ      (0 << 6)
+#define  IT8772F_EXTEMP_CONTROL_AUTO_16HZ      (1 << 6)
+#define  IT8772F_EXTEMP_CONTROL_AUTO_8HZ       (2 << 6)
+#define  IT8772F_EXTEMP_CONTROL_AUTO_4HZ       (3 << 6)
+#define  IT8772F_EXTEMP_CONTROL_AUTO_START     (1 << 5)
+#define  IT8772F_EXTEMP_CONTROL_AUTO_ABORT     (1 << 4)
+#define  IT8772F_EXTEMP_CONTROL_AUTO_TWO_DOMAIN        (1 << 3)
+#define  IT8772F_EXTEMP_CONTROL_CONTENTION     (1 << 2)
+#define  IT8772F_EXTEMP_CONTROL_SST_IDLE_HIGH  (1 << 1)
+#define  IT8772F_EXTEMP_CONTROL_START          (1 << 0)
+
+/* Standard PECI GetTemp */
+#define PECI_CLIENT_ADDRESS                    0x30
+#define PECI_GETTEMP_COMMAND                   0x01
+#define PECI_GETTEMP_WRITE_LENGTH              0x01
+#define PECI_GETTEMP_READ_LENGTH               0x02
+
+/* GPIO interface */
+#define IT8772F_GPIO_LED_BLINK1_PINMAP         0xf8
+#define IT8772F_GPIO_LED_BLINK1_CONTROL                0xf9
+
+#define GPIO_REG_SELECT(x)   (0x25 + (x))
+#define GPIO_REG_POLARITY(x) (0xb0 + (x))
+#define GPIO_REG_PULLUP(x)   (0xb8 + (x))
+#define GPIO_REG_ENABLE(x)   (0xc0 + (x))
+#define GPIO_REG_OUTPUT(x)   (0xc8 + (x))
+
+#ifndef __ROMCC__
+u8 it8772f_sio_read(u8 index);
+void it8772f_sio_write(u8 index, u8 value);
+void it8772f_enable_serial(device_t dev, u16 iobase);
+void it8772f_kill_watchdog(void);
+void it8772f_24mhz_clkin(void);
+void it8772f_enable_3vsbsw(void);
+void it8772f_ac_resume_southbridge(void);
+void it8772f_gpio_setup(int set, u8 func_select, u8 polarity, u8 pullup,
+                       u8 output, u8 enable);
+#endif
+
+#endif