- First stab at getting the ppc ports building and working.

[coreboot.git] / src / mainboard / motorola / sandpointx3_altimus_mpc7410 / Options.lb

diff --git a/src/mainboard/motorola/sandpointx3_altimus_mpc7410/Options.lb b/src/mainboard/motorola/sandpointx3_altimus_mpc7410/Options.lb
new file mode 100644 (file)
index 0000000..f17fc0e
--- /dev/null
+++ b/src/mainboard/motorola/sandpointx3_altimus_mpc7410/Options.lb
@@ -0,0 +1,122 @@
+uses CONFIG_SANDPOINT_ALTIMUS
+uses CONFIG_SANDPOINT_TALUS
+uses CONFIG_SANDPOINT_UNITY
+uses CONFIG_SANDPOINT_VALIS
+uses CONFIG_SANDPOINT_GYRUS
+uses ISA_IO_BASE
+uses ISA_MEM_BASE
+uses PCIC0_CFGADDR
+uses PCIC0_CFGDATA
+uses PNP_CFGADDR
+uses PNP_CFGDATA
+uses _IO_BASE
+
+uses CROSS_COMPILE 
+uses HAVE_OPTION_TABLE
+uses CONFIG_SANDPOINT_ALTIMUS 
+uses CONFIG_COMPRESS 
+uses DEFAULT_CONSOLE_LOGLEVEL 
+uses CONFIG_USE_INIT
+uses CONFIG_CHIP_CONFIGURE
+uses NO_POST
+uses CONFIG_CONSOLE_SERIAL8250 
+uses TTYS0_BASE 
+uses CONFIG_IDE
+uses CONFIG_FS_STREAM 
+uses CONFIG_FS_EXT2
+uses CONFIG_FS_ISO9660
+uses CONFIG_FS_FAT
+uses AUTOBOOT_CMDLINE
+uses PAYLOAD_SIZE
+uses ROM_SIZE
+uses ROM_IMAGE_SIZE
+uses _RESET
+uses _EXCEPTION_VECTORS
+uses _ROMBASE
+uses _ROMSTART
+uses _RAMBASE
+uses _RAMSTART
+uses STACK_SIZE
+uses HEAP_SIZE
+
+uses MAINBOARD
+uses MAINBOARD_VENDOR
+uses MAINBOARD_PART_NUMBER
+uses LINUXBIOS_EXTRA_VERSION
+uses CROSS_COMPILE
+uses CC
+uses HOSTCC
+uses OBJCOPY
+
+##
+## Set memory map
+##
+default ISA_IO_BASE=0xfe000000
+default ISA_MEM_BASE=0xfd000000
+default PCIC0_CFGADDR=0xfec00000
+default PCIC0_CFGDATA=0xfee00000
+default PNP_CFGADDR=0x15c
+default PNP_CFGDATA=0x15d
+default _IO_BASE=ISA_IO_BASE
+
+
+## use a cross compiler
+#default CROSS_COMPILE="powerpc-eabi-"
+#default CROSS_COMPILE="ppc_74xx-"
+
+## Use stage 1 initialization code
+default CONFIG_USE_INIT=1
+
+## Use static configuration
+default CONFIG_CHIP_CONFIGURE=1
+
+## We don't use compressed image
+default CONFIG_COMPRESS=0
+
+## Turn off POST codes
+default NO_POST=1
+
+## Enable serial console
+default DEFAULT_CONSOLE_LOGLEVEL=8
+default CONFIG_CONSOLE_SERIAL8250=1
+default TTYS0_BASE=0x3f8
+
+## Load payload using filo
+default CONFIG_IDE=1
+default CONFIG_FS_STREAM=1
+default CONFIG_FS_EXT2=1
+default CONFIG_FS_ISO9660=1
+default CONFIG_FS_FAT=1
+default AUTOBOOT_CMDLINE="hdc1:/vmlinuz"
+
+# LinuxBIOS must fit into 128KB
+default ROM_IMAGE_SIZE=131072
+default ROM_SIZE={ROM_IMAGE_SIZE+PAYLOAD_SIZE}
+default PAYLOAD_SIZE=262144
+
+# Set stack and heap sizes (stage 2)
+default STACK_SIZE=0x10000
+default HEAP_SIZE=0x10000
+
+# Sandpoint Demo Board
+## Base of ROM
+default _ROMBASE=0xfff00000
+
+## Sandpoint reset vector
+default _RESET=_ROMBASE+0x100
+
+## Exception vectors (other than reset vector)
+default _EXCEPTION_VECTORS=_RESET+0x100
+
+## Start of linuxBIOS in the boot rom
+## = _RESET + exeception vector table size
+default _ROMSTART=_RESET+0x3100
+
+## LinuxBIOS C code runs at this location in RAM
+default _RAMBASE=0x00100000
+default _RAMSTART=0x00100000
+
+default CONFIG_SANDPOINT_ALTIMUS=1
+
+### End Options.lb
+end