Add the AMD Torpedo mainboard

[coreboot.git] / src / mainboard / amd / torpedo / get_bus_conf.c

diff --git a/src/mainboard/amd/torpedo/get_bus_conf.c b/src/mainboard/amd/torpedo/get_bus_conf.c
new file mode 100755 (executable)
index 0000000..436f6a8
--- /dev/null
+++ b/src/mainboard/amd/torpedo/get_bus_conf.c
@@ -0,0 +1,145 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <string.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <cpu/amd/amdfam12.h>
+#include "agesawrapper.h"
+
+
+/* Global variables for MB layouts and these will be shared by irqtable mptable
+* and acpi_tables busnum is default.
+*/
+u8 bus_isa;
+u8 bus_sb900[3];
+
+/*
+* Here you only need to set value in pci1234 for HT-IO that could be installed or not
+* You may need to preset pci1234 for HTIO board,
+* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
+*/
+u32 pci1234x[] = {
+  0x0000ff0,
+};
+
+/*
+* HT Chain device num, actually it is unit id base of every ht device in chain,
+* assume every chain only have 4 ht device at most
+*/
+u32 hcdnx[] = {
+  0x20202020,
+};
+
+u32 bus_type[256];
+
+u32 sbdn_sb900;
+
+//KZ [092110]extern void get_pci1234(void);
+
+static u32 get_bus_conf_done = 0;
+
+
+
+
+void get_bus_conf(void)
+{
+  u32 status;
+
+  device_t dev;
+  int i, j;
+
+  if (get_bus_conf_done == 1)
+    return;   /* do it only once */
+
+  get_bus_conf_done = 1;
+
+  printk(BIOS_DEBUG, "Mainboard - Get_bus_conf.c - get_bus_conf - Start.\n");
+/*
+ * This is the call to AmdInitLate.  It is really in the wrong place, conceptually,
+ * but functionally within the coreboot model, this is the best place to make the
+ * call.  The logically correct place to call AmdInitLate is after PCI scan is done,
+ * after the decision about S3 resume is made, and before the system tables are 
+ * written into RAM.  The routine that is responsible for writing the tables is 
+ * "write_tables", called near the end of "hardwaremain".  There is no platform 
+ * specific entry point between the S3 resume decision point and the call to 
+ * "write_tables", and the next platform specific entry points are the calls to 
+ * the ACPI table write functions.  The first of ose would seem to be the right 
+ * place, but other table write functions, e.g. the PIRQ table write function, are 
+ * called before the ACPI tables are written.  This routine is called at the beginning
+ * of each of the write functions called prior to the ACPI write functions, so this
+ * becomes the best place for this call.
+ */
+  status = agesawrapper_amdinitlate(); 
+  if(status) {
+    printk(BIOS_DEBUG, "agesawrapper_amdinitlate failed: %x \n", status);
+  }
+  printk(BIOS_DEBUG, "Got past agesawrapper_amdinitlate\n");
+  
+  sbdn_sb900 = 0;
+
+  for (i = 0; i < 3; i++) {
+    bus_sb900[i] = 0;
+  }
+
+  for (i = 0; i < 256; i++) {
+    bus_type[i] = 0; /* default ISA bus. */
+  }
+
+
+  bus_type[0] = 1;  /* pci */
+
+//  bus_sb900[0] = (sysconf.pci1234[0] >> 16) & 0xff;
+  bus_sb900[0] = (pci1234x[0] >> 16) & 0xff;
+
+  /* sb900 */
+  dev = dev_find_slot(bus_sb900[0], PCI_DEVFN(sbdn_sb900 + 0x14, 4));
+
+
+
+  if (dev) {
+    bus_sb900[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+
+    bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+    bus_isa++;
+    for (j = bus_sb900[1]; j < bus_isa; j++)
+      bus_type[j] = 1;
+  }
+
+  for (i = 0; i < 4; i++) {
+    dev = dev_find_slot(bus_sb900[0], PCI_DEVFN(sbdn_sb900 + 0x14, i));
+    if (dev) {
+      bus_sb900[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+      bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+      bus_isa++;
+    }
+  }
+  for (j = bus_sb900[2]; j < bus_isa; j++)
+    bus_type[j] = 1;
+
+
+  /* I/O APICs:   APIC ID Version State   Address */
+  bus_isa = 10;
+
+  sb_Late_Post();
+  printk(BIOS_DEBUG, "Mainboard - Get_bus_conf.c - get_bus_conf - End.\n");
+}