AMD Geode cpus: apply un-written naming rules

[coreboot.git] / src / cpu / amd / model_gx1 / cpu_setup.inc

diff --git a/src/cpu/amd/model_gx1/cpu_setup.inc b/src/cpu/amd/model_gx1/cpu_setup.inc
deleted file mode 100644 (file)
index d701f8d..0000000
--- a/src/cpu/amd/model_gx1/cpu_setup.inc
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
-    freebios/src/northbridge/nsc/gx1/cpu_setup.inc
-
-    Copyright (c) 2002 Christer Weinigel <wingel@hack.org>
-
-    Initialize the GX1 CPU configuration registers
-*/
-
-/* USES: esi, ecx, eax */
-
-#include <cpu/amd/gx1def.h>
-
-       movl %eax, %ebp /* preserve bist */
-
-cpu_setup_start:
-       leal    cpu_setup_table, %esi
-       movl    $cpu_setup_len, %ecx
-
-cpu_setup_loop:
-       movw    (%esi), %ax
-       addl    $2, %esi
-       outb    %al, $0x22
-       movb    %ah, %al
-       outb    %al, $0x23
-       loop    cpu_setup_loop
-
-       movb    $0xff, %al              /* DIR1 -- Identification Register 1 */
-       outb    %al, $0x22
-       inb     $0x23, %al
-       cmpb    $0x63, %al              /* Revision for GXLV rev 3 */
-       jbe     cpu_no_ccr4
-
-       movb    $0xe8, %al              /* CCR4 */
-       outb    %al, $0x22
-       inb     $0x23, %al
-       orb     $0x20, %al              /* Enable FPU Fast Mode */
-       outb    %al, $0x23
-
-       movb    $0xf0, %al              /* PCR1 --- Performace Control  */
-       outb    %al, $0x22
-       inb     $0x23, %al
-       orb     $0x02, %al              /* Incrementor on, whatever that is */
-       outb    %al, $0x23
-
-       movb    $0x20, %al              /* PCR0 --- Performace Control  */
-       outb    %al, $0x22
-       inb     $0x23, %al
-       orb     $0x20, %al              /* Must be 1 according to data book */
-       orb     $0x04, %al              /* Incrementor Margin 10 */
-       outb    %al, $0x23
-cpu_no_ccr4:
-
-       jmp     cpu_setup_end
-
-cpu_setup_table:
-       .byte   0xc1, 0x00              /* NO SMIs */
-       .byte   0xc3, 0x14              /* Enable CPU config register */
-       .byte   0x20, 0x00
-       .byte   0xb8, GX_BASE>>30       /* Enable GXBASE address */
-       .byte   0xc2, 0x00
-       .byte   0xe8, 0x98
-       .byte   0xc3, 0xf8              /* Enable CPU config register */
-cpu_setup_len = (.-cpu_setup_table)/2
-
-cpu_setup_end:
-       nop
-
-       movl %ebp, %eax /* Restore bist */